[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [O] Org equivalent to \chapter*
From: |
Thorsten Jolitz |
Subject: |
Re: [O] Org equivalent to \chapter* |
Date: |
Wed, 06 Aug 2014 03:11:01 +0200 |
User-agent: |
Gnus/5.13 (Gnus v5.13) Emacs/24.3 (gnu/linux) |
Alan L Tyree <address@hidden> writes:
> I'm sure this has been asked before, but I can't seem to find it. Is
> there an org markup that produces a starred latex heading?
>
> In a book, for example, I want the Preface to be at chapter level, but
> not included in the numbering. Same for HTML export, of course.
,----[ C-h v org-latex-classes RET ]
| org-latex-classes is a variable defined in `ox-latex.el'.
| Its value is shown below.
|
| Documentation:
| Alist of LaTeX classes and associated header and structure.
| If #+LATEX_CLASS is set in the buffer, use its value and the
| associated information. Here is the structure of each cell:
|
| (class-name
| header-string
| (numbered-section . unnumbered-section)
| ...)
|
| The header string
| -----------------
|
| The HEADER-STRING is the header that will be inserted into the
| LaTeX file. It should contain the \documentclass macro, and
| anything else that is needed for this setup. To this header, the
| following commands will be added:
|
| - Calls to \usepackage for all packages mentioned in the
| variables `org-latex-default-packages-alist' and
| `org-latex-packages-alist'. Thus, your header definitions
| should avoid to also request these packages.
|
| - Lines specified via "#+LATEX_HEADER:" and
| "#+LATEX_HEADER_EXTRA:" keywords.
|
| If you need more control about the sequence in which the header
| is built up, or if you want to exclude one of these building
| blocks for a particular class, you can use the following
| macro-like placeholders.
|
| [DEFAULT-PACKAGES] \usepackage statements for default packages
| [NO-DEFAULT-PACKAGES] do not include any of the default packages
| [PACKAGES] \usepackage statements for packages
| [NO-PACKAGES] do not include the packages
| [EXTRA] the stuff from #+LATEX_HEADER(_EXTRA)
| [NO-EXTRA] do not include #+LATEX_HEADER(_EXTRA) stuff
|
| So a header like
|
| \documentclass{article}
| [NO-DEFAULT-PACKAGES]
| [EXTRA]
| \providecommand{\alert}[1]{\textbf{#1}}
| [PACKAGES]
|
| will omit the default packages, and will include the
| #+LATEX_HEADER and #+LATEX_HEADER_EXTRA lines, then have a call
| to \providecommand, and then place \usepackage commands based
| on the content of `org-latex-packages-alist'.
|
| If your header, `org-latex-default-packages-alist' or
| `org-latex-packages-alist' inserts "\usepackage[AUTO]{inputenc}",
| AUTO will automatically be replaced with a coding system derived
| from `buffer-file-coding-system'. See also the variable
| `org-latex-inputenc-alist' for a way to influence this mechanism.
|
| Likewise, if your header contains "\usepackage[AUTO]{babel}",
| AUTO will be replaced with the language related to the language
| code specified by `org-export-default-language', which see. Note
| that constructions such as "\usepackage[french,AUTO,english]{babel}"
| are permitted.
|
| The sectioning structure
| ------------------------
|
| The sectioning structure of the class is given by the elements
| following the header string. For each sectioning level, a number
| of strings is specified. A %s formatter is mandatory in each
| section string and will be replaced by the title of the section.
|
| Instead of a cons cell (numbered . unnumbered), you can also
| provide a list of 2 or 4 elements,
|
| (numbered-open numbered-close)
|
| or
|
| (numbered-open numbered-close unnumbered-open unnumbered-close)
|
| providing opening and closing strings for a LaTeX environment
| that should represent the document section. The opening clause
| should have a %s to represent the section title.
|
| Instead of a list of sectioning commands, you can also specify
| a function name. That function will be called with two
| parameters, the (reduced) level of the headline, and a predicate
| non-nil when the headline should be numbered. It must return
| a format string in which the section title will be added.
|
| You can customize this variable.
|
| Value: (("koma-book" "\\documentclass{scrbook}"
| ("\\part{%s}" . "\\part*{%s}")
| ("\\chapter{%s}" . "\\chapter*{%s}")
| ("\\section{%s}" . "\\section*{%s}")
| ("\\subsection{%s}" . "\\subsection*{%s}")
| ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
| ("\\paragraph{%s}" . "\\paragraph*{%s}")
| ("\\subparagraph{%s}" . "\\subparagraph*{%s}"))
| ("koma-article" "\\documentclass{scrartcl}"
| ("\\section{%s}" . "\\section*{%s}")
| ("\\subsection{%s}" . "\\subsection*{%s}")
| ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
| ("\\paragraph{%s}" . "\\paragraph*{%s}")
| ("\\subparagraph{%s}" . "\\subparagraph*{%s}"))
| ("article" "\\documentclass[11pt]{article}"
| ("\\section{%s}" . "\\section*{%s}")
| ("\\subsection{%s}" . "\\subsection*{%s}")
| ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
| ("\\paragraph{%s}" . "\\paragraph*{%s}")
| ("\\subparagraph{%s}" . "\\subparagraph*{%s}"))
| ("report" "\\documentclass[11pt]{report}"
| ("\\part{%s}" . "\\part*{%s}")
| ("\\chapter{%s}" . "\\chapter*{%s}")
| ("\\section{%s}" . "\\section*{%s}")
| ("\\subsection{%s}" . "\\subsection*{%s}")
| ("\\subsubsection{%s}" . "\\subsubsection*{%s}"))
| ("book" "\\documentclass[11pt]{book}"
| ("\\part{%s}" . "\\part*{%s}")
| ("\\chapter{%s}" . "\\chapter*{%s}")
| ("\\section{%s}" . "\\section*{%s}")
| ("\\subsection{%s}" . "\\subsection*{%s}")
| ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
|
| Original value was
| (("article" "\\documentclass[11pt]{article}"
| ("\\section{%s}" . "\\section*{%s}")
| ("\\subsection{%s}" . "\\subsection*{%s}")
| ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
| ("\\paragraph{%s}" . "\\paragraph*{%s}")
| ("\\subparagraph{%s}" . "\\subparagraph*{%s}"))
| ("report" "\\documentclass[11pt]{report}"
| ("\\part{%s}" . "\\part*{%s}")
| ("\\chapter{%s}" . "\\chapter*{%s}")
| ("\\section{%s}" . "\\section*{%s}")
| ("\\subsection{%s}" . "\\subsection*{%s}")
| ("\\subsubsection{%s}" . "\\subsubsection*{%s}"))
| ("book" "\\documentclass[11pt]{book}"
| ("\\part{%s}" . "\\part*{%s}")
| ("\\chapter{%s}" . "\\chapter*{%s}")
| ("\\section{%s}" . "\\section*{%s}")
| ("\\subsection{%s}" . "\\subsection*{%s}")
| ("\\subsubsection{%s}" . "\\subsubsection*{%s}")))
|
| [back]
`----
--
cheers,
Thorsten
- [O] Org equivalent to \chapter*, Alan L Tyree, 2014/08/05
- Re: [O] Org equivalent to \chapter*,
Thorsten Jolitz <=
- Re: [O] Org equivalent to \chapter*, Rasmus, 2014/08/06
- Re: [O] Org equivalent to \chapter*, Thomas S. Dye, 2014/08/06
- Re: [O] Org equivalent to \chapter*, Rasmus, 2014/08/06
- Re: [O] Org equivalent to \chapter*, Thomas S. Dye, 2014/08/06
- Re: [O] Org equivalent to \chapter*, Alan L Tyree, 2014/08/06
- Re: [O] Org equivalent to \chapter*, Rasmus, 2014/08/07
- Re: [O] Org equivalent to \chapter*, Alan L Tyree, 2014/08/07
- Re: [O] Org equivalent to \chapter*, Rasmus, 2014/08/08