espressomd-maintainer
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Espressomd-maintainer] Build failed in Jenkins: master-nightly-multicon


From: Jenkins Demon
Subject: [Espressomd-maintainer] Build failed in Jenkins: master-nightly-multiconfig » maxset,nompi #155
Date: Wed, 17 Sep 2014 04:15:46 +0200 (CEST)

See 
<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/155/changes>

Changes:

[Olaf Lenz] More travis.

------------------------------------------
[...truncated 302 lines...]
Tcl/Tk
------
Tcl version             = tcl8.6
Tk version              = none

Python
------
python                  = /usr/bin/python -B
build python interface  = 

Other settings
--------------
config                  = myconfig.hpp
installation prefix     = /home/jenkins/Espresso
number of test tasks    = 8
mympiexec               = 
mpiexec                 = 
pdflatex                = /usr/bin/pdflatex
makeindex               = /usr/bin/makeindex
bibtex                  = /usr/bin/bibtex
doxygen                 = /usr/bin/doxygen
dot                     = /usr/bin/dot

WARNING: MPI disabled or not supported! Parallelization turned off.
Not building Python interface.
END CONFIGURE
<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/ws/>
+ maintainer/jenkins/build.sh
15238 (process ID) old priority 0, new priority 5
  
srcdir=<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/ws/>
  
builddir=<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/ws/>
  insource=true
  parallelism=nompi
START BUILD
  myconfig=maxset
  build_procs=4
<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/ws/>
 
<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/ws/>
Copying maxset.hpp to 
<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/ws/myconfig.hpp...>
>make -j 4
Making all in config
make[1]: Entering directory 
`<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/ws/config'>
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory 
`<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/ws/config'>
Making all in src
make[1]: Entering directory 
`<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/ws/src'>
make  all-recursive
make[2]: Entering directory 
`<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/ws/src'>
Making all in core
make[3]: Entering directory 
`<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/ws/src/core'>
  GEN      myconfig-final.hpp <= ../../myconfig.hpp
  GEN      config-features.hpp
  GEN      config-features.cpp
make  all-am
make[4]: Entering directory 
`<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/ws/src/core'>
  CXX      config-features.lo
  CXX      cells.lo
  CXX      collision.lo
  CXX      communication.lo
  CXX      comfixed.lo
  CXX      comforce.lo
  CXX      constraint.lo
  CXX      cuda_interface.lo
  CXX      debug.lo
  CXX      domain_decomposition.lo
  CXX      electrokinetics_pdb_parse.lo
  CXX      energy.lo
  CXX      external_potential.lo
  CXX      errorhandling.lo
external_potential.cpp: In function 'int write_local_lattice_to_file(const 
char*, Lattice*)':
external_potential.cpp:231:62: warning: format '%d' expects argument of type 
'int', but argument 3 has type 'size_t {aka long unsigned int}' [-Wformat]
  CXX      fft.lo
  CXX      fft-common.lo
  CXX      fft-dipolar.lo
  CXX      forcecap.lo
  CXX      forces.lo
  CXX      galilei.lo
  CXX      ghosts.lo
  CXX      global.lo
ghosts.cpp: In function 'void prepare_send_buffer(GhostCommunication*, int)':
ghosts.cpp:220:53: warning: format '%d' expects argument of type 'int', but 
argument 5 has type 'long int' [-Wformat]
ghosts.cpp: In function 'void put_recv_buffer(GhostCommunication*, int)':
ghosts.cpp:349:55: warning: format '%d' expects argument of type 'int', but 
argument 5 has type 'long int' [-Wformat]
ghosts.cpp:354:59: warning: format '%d' expects argument of type 'int', but 
argument 4 has type '__gnu_cxx::__normal_iterator<int*, std::vector<int> 
>::difference_type {aka long int}' [-Wformat]
ghosts.cpp: In function 'void add_forces_from_recv_buffer(GhostCommunication*)':
ghosts.cpp:380:55: warning: format '%d' expects argument of type 'int', but 
argument 5 has type 'long int' [-Wformat]
  CXX      grid.lo
  CXX      halo.lo
  CXX      iccp3m.lo
  CXX      imd.lo
  CXX      initialize.lo
  CXX      integrate.lo
  CXX      interaction_data.lo
  CXX      lattice.lo
  CXX      layered.lo
  CXX      lb.lo
  CXX      lb-boundaries.lo
  CXX      lbgpu.lo
  CXX      metadynamics.lo
  CXX      modes.lo
  CXX      molforces.lo
  CXX      mol_cut.lo
  CXX      nemd.lo
  CXX      nsquare.lo
  CXX      particle_data.lo
  CXX      polymer.lo
polymer.cpp: In function 'int constraint_collision(double*, double*)':
polymer.cpp:147:11: warning: enumeration value 'CONSTRAINT_NONE' not handled in 
switch [-Wswitch]
polymer.cpp:147:11: warning: enumeration value 'CONSTRAINT_ROD' not handled in 
switch [-Wswitch]
polymer.cpp:147:11: warning: enumeration value 'CONSTRAINT_EXT_MAGN_FIELD' not 
handled in switch [-Wswitch]
polymer.cpp:147:11: warning: enumeration value 'CONSTRAINT_PLANE' not handled 
in switch [-Wswitch]
polymer.cpp:147:11: warning: enumeration value 'CONSTRAINT_STOMATOCYTE' not 
handled in switch [-Wswitch]
polymer.cpp:147:11: warning: enumeration value 'CONSTRAINT_SLITPORE' not 
handled in switch [-Wswitch]
polymer.cpp:147:11: warning: enumeration value 'CONSTRAINT_HOLLOW_CONE' not 
handled in switch [-Wswitch]
  CXX      pressure.lo
  CXX      random.lo
  CXX      rattle.lo
  CXX      reaction.lo
  CXX      rotation.lo
  CXX      specfunc.lo
  CXX      statistics.lo
  CXX      statistics_chain.lo
  CXX      statistics_cluster.lo
  CXX      statistics_correlation.lo
  CXX      statistics_fluid.lo
  CXX      statistics_molecule.lo
  CXX      statistics_observable.lo
  CXX      statistics_wallstuff.lo
  CXX      thermostat.lo
statistics_observable.cpp: In function 'void 
mpi_observable_lb_radial_velocity_profile_slave_implementation()':
statistics_observable.cpp:593:54: warning: 'pdata.radial_profile_data::rbins' 
is used uninitialized in this function [-Wuninitialized]
statistics_observable.cpp:593:54: warning: 'pdata.radial_profile_data::phibins' 
is used uninitialized in this function [-Wuninitialized]
statistics_observable.cpp:593:54: warning: 'pdata.radial_profile_data::zbins' 
is used uninitialized in this function [-Wuninitialized]
  CXX      topology.lo
  CXX      tuning.lo
  CXX      uwerr.lo
  CXX      verlet.lo
  CXX      virtual_sites.lo
  CXX      virtual_sites_com.lo
  CXX      virtual_sites_relative.lo
  CXX      vmdsock.lo
  CXX      ghmc.lo
  CXX      EspressoSystemInterface.lo
  CXX      bmhtf-nacl.lo
  CXX      buckingham.lo
  CXX      dpd.lo
  CXX      gaussian.lo
  CXX      gb.lo
  CXX      hat.lo
  CXX      hertzian.lo
  CXX      lj.lo
  CXX      ljangle.lo
  CXX      ljcos.lo
  CXX      ljcos2.lo
  CXX      ljgen.lo
  CXX      morse.lo
  CXX      soft_sphere.lo
  CXX      steppot.lo
  CXX      tab.lo
  CXX      tunable_slip.lo
  CXX      angle.lo
  CXX      angle_harmonic.lo
  CXX      angle_cosine.lo
  CXX      angle_cossquare.lo
  CXX      angledist.lo
  CXX      dihedral.lo
  CXX      endangledist.lo
  CXX      fene.lo
angledist.cpp: In function 'double calc_angledist_param(Particle*, Particle*, 
Particle*, Bonded_ia_parameters*)':
angledist.cpp:104:11: warning: enumeration value 'CONSTRAINT_NONE' not handled 
in switch [-Wswitch]
angledist.cpp:104:11: warning: enumeration value 'CONSTRAINT_SPH' not handled 
in switch [-Wswitch]
angledist.cpp:104:11: warning: enumeration value 'CONSTRAINT_CYL' not handled 
in switch [-Wswitch]
angledist.cpp:104:11: warning: enumeration value 'CONSTRAINT_ROD' not handled 
in switch [-Wswitch]
angledist.cpp:104:11: warning: enumeration value 'CONSTRAINT_PLATE' not handled 
in switch [-Wswitch]
angledist.cpp:104:11: warning: enumeration value 'CONSTRAINT_MAZE' not handled 
in switch [-Wswitch]
angledist.cpp:104:11: warning: enumeration value 'CONSTRAINT_PORE' not handled 
in switch [-Wswitch]
angledist.cpp:104:11: warning: enumeration value 'CONSTRAINT_EXT_MAGN_FIELD' 
not handled in switch [-Wswitch]
angledist.cpp:104:11: warning: enumeration value 'CONSTRAINT_PLANE' not handled 
in switch [-Wswitch]
angledist.cpp:104:11: warning: enumeration value 'CONSTRAINT_RHOMBOID' not 
handled in switch [-Wswitch]
angledist.cpp:104:11: warning: enumeration value 'CONSTRAINT_STOMATOCYTE' not 
handled in switch [-Wswitch]
angledist.cpp:104:11: warning: enumeration value 'CONSTRAINT_SLITPORE' not 
handled in switch [-Wswitch]
angledist.cpp:104:11: warning: enumeration value 'CONSTRAINT_HOLLOW_CONE' not 
handled in switch [-Wswitch]
  CXX      harmonic.lo
  CXX      quartic.lo
  CXX      overlap.lo
endangledist.cpp: In function 'double calc_pwdist(Particle*, 
Bonded_ia_parameters*, int*)':
endangledist.cpp:77:11: warning: enumeration value 'CONSTRAINT_NONE' not 
handled in switch [-Wswitch]
endangledist.cpp:77:11: warning: enumeration value 'CONSTRAINT_SPH' not handled 
in switch [-Wswitch]
endangledist.cpp:77:11: warning: enumeration value 'CONSTRAINT_CYL' not handled 
in switch [-Wswitch]
endangledist.cpp:77:11: warning: enumeration value 'CONSTRAINT_ROD' not handled 
in switch [-Wswitch]
endangledist.cpp:77:11: warning: enumeration value 'CONSTRAINT_PLATE' not 
handled in switch [-Wswitch]
endangledist.cpp:77:11: warning: enumeration value 'CONSTRAINT_MAZE' not 
handled in switch [-Wswitch]
endangledist.cpp:77:11: warning: enumeration value 'CONSTRAINT_PORE' not 
handled in switch [-Wswitch]
endangledist.cpp:77:11: warning: enumeration value 'CONSTRAINT_EXT_MAGN_FIELD' 
not handled in switch [-Wswitch]
endangledist.cpp:77:11: warning: enumeration value 'CONSTRAINT_PLANE' not 
handled in switch [-Wswitch]
endangledist.cpp:77:11: warning: enumeration value 'CONSTRAINT_RHOMBOID' not 
handled in switch [-Wswitch]
endangledist.cpp:77:11: warning: enumeration value 'CONSTRAINT_STOMATOCYTE' not 
handled in switch [-Wswitch]
endangledist.cpp:77:11: warning: enumeration value 'CONSTRAINT_SLITPORE' not 
handled in switch [-Wswitch]
endangledist.cpp:77:11: warning: enumeration value 'CONSTRAINT_HOLLOW_CONE' not 
handled in switch [-Wswitch]
endangledist.cpp:93:11: warning: enumeration value 'CONSTRAINT_NONE' not 
handled in switch [-Wswitch]
endangledist.cpp:93:11: warning: enumeration value 'CONSTRAINT_SPH' not handled 
in switch [-Wswitch]
endangledist.cpp:93:11: warning: enumeration value 'CONSTRAINT_CYL' not handled 
in switch [-Wswitch]
endangledist.cpp:93:11: warning: enumeration value 'CONSTRAINT_ROD' not handled 
in switch [-Wswitch]
endangledist.cpp:93:11: warning: enumeration value 'CONSTRAINT_PLATE' not 
handled in switch [-Wswitch]
endangledist.cpp:93:11: warning: enumeration value 'CONSTRAINT_MAZE' not 
handled in switch [-Wswitch]
endangledist.cpp:93:11: warning: enumeration value 'CONSTRAINT_PORE' not 
handled in switch [-Wswitch]
endangledist.cpp:93:11: warning: enumeration value 'CONSTRAINT_EXT_MAGN_FIELD' 
not handled in switch [-Wswitch]
endangledist.cpp:93:11: warning: enumeration value 'CONSTRAINT_PLANE' not 
handled in switch [-Wswitch]
endangledist.cpp:93:11: warning: enumeration value 'CONSTRAINT_RHOMBOID' not 
handled in switch [-Wswitch]
endangledist.cpp:93:11: warning: enumeration value 'CONSTRAINT_STOMATOCYTE' not 
handled in switch [-Wswitch]
endangledist.cpp:93:11: warning: enumeration value 'CONSTRAINT_SLITPORE' not 
handled in switch [-Wswitch]
endangledist.cpp:93:11: warning: enumeration value 'CONSTRAINT_HOLLOW_CONE' not 
handled in switch [-Wswitch]
  CXX      bonded_coulomb.lo
  CXX      subt_lj.lo
  CXX      debye_hueckel.lo
  CXX      elc.lo
  CXX      magnetic_non_p3m_methods.lo
  CXX      mdlc_correction.lo
  CXX      maggs.lo
  CXX      mmm1d.lo
  CXX      mmm2d.lo
  CXX      mmm-common.lo
  CXX      p3m.lo
  CXX      p3m-common.lo
  CXX      p3m-dipolar.lo
  CXX      reaction_field.lo
  GEN      config-version.cpp
  NVCC     cuda_init_cuda.lo
  NVCC     cuda_common_cuda.lo
  NVCC     electrokinetics_cuda.lo
  NVCC     lbgpu_cuda.lo
  NVCC     p3m_gpu_cuda.lo
electrokinetics_cuda.cu(2838): error: identifier "runtime_error" is undefined

electrokinetics_cuda.cu(2839): error: identifier "ERROR_SPRINTF" is undefined

2 errors detected in the compilation of 
"/tmp/tmpxft_0000452b_00000000-6_electrokinetics_cuda.cpp1.ii".
make[4]: *** [electrokinetics_cuda.lo] Error 1
make[4]: *** Waiting for unfinished jobs....
make[4]: Leaving directory 
`<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/ws/src/core'>
make[3]: *** [all] Error 2
make[3]: Leaving directory 
`<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/ws/src/core'>
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory 
`<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/ws/src'>
make[1]: *** [all] Error 2
make[1]: Leaving directory 
`<http://espressomd.org/jenkins/job/master-nightly-multiconfig/myconfig=maxset,parallelism=nompi/ws/src'>
make: *** [all-recursive] Error 1
+ exit 1
Build step 'Execute shell' marked build as failure
[WARNINGS] Skipping publisher since build result is FAILURE



reply via email to

[Prev in Thread] Current Thread [Next in Thread]