[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Freeipmi-devel] Re: [llnl-devel] Re: power control and BMC configuratio

From: Anand Babu
Subject: [Freeipmi-devel] Re: [llnl-devel] Re: power control and BMC configuration problem
Date: Thu, 22 Jan 2004 14:00:17 -0800
User-agent: Gnus/5.1006 (Gnus v5.10.6) Emacs/21.3 (gnu/linux)

GE Power Systems faced the same problem. I believe it was because of
their switch configuration (related to spanning tree model). I can ask
Anand Manian (GE PS) to help us.

I could not reproduce the problem here. I am not a switch expert. 
I will ask Brian Lavender or Rick Moen to try at Synnex.

,----[ Albert Chu <address@hidden> ]
| Hey AB,
| We tried the cross-over cable, and power control worked perfectly.  So
| its most likely some type of switch issue.  Have you been able to
| reproduce the problem??
| Albert Chu
| address@hidden
| Lawrence Livermore National Laboratory

>----- Original Message -----
>From: Anand Babu <address@hidden>
>Date: Tuesday, January 20, 2004 1:47 pm
>Subject: Re: [llnl-devel] Re: power control and BMC configuration problem

> I have seen exactly same kind of problem at GE, because of switch
> configuration (spanning tree related). To eliminate network related
> issues, Use a cross over cable to test the BMC communication.
> -ab
> >Oh, I should note that this problem is completely different than 
> than 
> >ARP issue that happened a few weeks ago.  Gratuitous ARPs are 
> enabled,>so this is a different configuration issue.
> >Al
> -- 
> Anand Babu
> Free as in Freedom <>

Anand Babu
Free as in Freedom <>

reply via email to

[Prev in Thread] Current Thread [Next in Thread]