[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Freeipmi-devel] [bugs #8718] sensors not interpreting sensor ID 42 corr
From: |
Anand Babu |
Subject: |
[Freeipmi-devel] [bugs #8718] sensors not interpreting sensor ID 42 correctly |
Date: |
Thu, 02 Sep 2004 04:32:56 -0400 |
User-agent: |
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.7) Gecko/20040823 Firefox/0.9.3 |
This mail is an automated notification from the bugs tracker
of the project: FreeIPMI.
/**************************************************************************/
[bugs #8718] Latest Modifications:
Changes by:
Anand Babu <address@hidden>
'Date:
Thu 09/02/2004 at 08:27 (US/Pacific)
What | Removed | Added
---------------------------------------------------------------------------
Resolution | None | Fixed
Assigned to | None | ab
Status | Open | Closed
------------------ Additional Follow-up Comments ----------------------------
Status interpretation code now solely relies on BMC's report. Old additional
buggy code removed.
/**************************************************************************/
[bugs #8718] Full Item Snapshot:
URL: <http://savannah.nongnu.org/bugs/?func=detailitem&item_id=8718>
Project: FreeIPMI
Submitted by: Joseph Ruscio
On: Wed 04/28/2004 at 04:54
Category: sensors
Severity: 5 - Average
Item Group: Improper Behaviour
Resolution: Fixed
Privacy: Public
Assigned to: ab
Status: Closed
Summary: sensors not interpreting sensor ID 42 correctly
Original Submission: I have observed an incorrect output on sensor 42 when the
temperature approaches a high range. The first output is when the temperature
is 29 degrees and is as expected. The second output is for a temperature
reading of 28 degrees. This reading results in an erroneous status of ALERT.
address@hidden freeipmi_ft]$ sensors -v -s 42
Record ID: 42
Sensor type: Proc Bd Amb FanB (OEM Reserved)
Sensor number: #85
Event/Reading type code: 01h
Lower non-recoverable threshold: 0.00 Degrees C
Upper non-recoverable threshold: 0.00 Degrees C
Lower Critical threshold: 0.00 Degrees C
Upper Critical threshold: 0.00 Degrees C
Lower non-critical threshold: 0.00 Degrees C
Upper non-critical threshold: 30.00 Degrees C
Sensor min. reading: -128.00 Degrees C
Sensor max. reading: 127.00 Degrees C
Normal min.: 10.00 Degrees C
Nominal reading: 25.00 Degrees C
Normal max: 29.00 Degrees C
Sensor reading: 29.00 Degrees C
Sensor status: OK
address@hidden freeipmi_ft]$ sensors -v -s 42
Record ID: 42
Sensor type: Proc Bd Amb FanB (OEM Reserved)
Sensor number: #85
Event/Reading type code: 01h
Lower non-recoverable threshold: 0.00 Degrees C
Upper non-recoverable threshold: 0.00 Degrees C
Lower Critical threshold: 0.00 Degrees C
Upper Critical threshold: 0.00 Degrees C
Lower non-critical threshold: 0.00 Degrees C
Upper non-critical threshold: 30.00 Degrees C
Sensor min. reading: -128.00 Degrees C
Sensor max. reading: 127.00 Degrees C
Normal min.: 10.00 Degrees C
Nominal reading: 25.00 Degrees C
Normal max: 29.00 Degrees C
Sensor reading: 28.00 Degrees C
Sensor status: at or above (>=) upper non-critical threshold
Sensor status: ALERT
Follow-up Comments
------------------
-------------------------------------------------------
Date: Thu 09/02/2004 at 08:27 By: Anand Babu <ab>
Status interpretation code now solely relies on BMC's report. Old additional
buggy code removed.
For detailed info, follow this link:
<http://savannah.nongnu.org/bugs/?func=detailitem&item_id=8718>
_______________________________________________
Message sent via/by Savannah
http://savannah.nongnu.org/
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Freeipmi-devel] [bugs #8718] sensors not interpreting sensor ID 42 correctly,
Anand Babu <=