[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Freeipmi-devel] Re: symbols missing problem

From: Anand Babu
Subject: [Freeipmi-devel] Re: symbols missing problem
Date: Sat, 25 Mar 2006 09:15:02 -0800
User-agent: Gnus/5.1006 (Gnus v5.10.6) Emacs/21.4 (gnu/linux)

,----[ Albert Chu <address@hidden> ]
| Hey Rene,
| Yup, I was able to verify that rebuilding the rpm under Suse fixed the
| problem.  I'm not really sure what the problem was with the old Redhat
| RPMS.  Just did the typical:
| > rpmbuild --rebuild freeipmi-0.2.0-1.src.rpm
| If you have a number of architectures of Suse, it'd be great if you
| could rebuild the rpms and we could stick em all on the website.
Finally Anand Avati found the issue. He pointed out that old version
of libfreeipmi installed under /usr/lib and 64-bit freeipmi tools
were looking under /usr/lib64. Uninstalling all freeipmi RPMs and
freshly configuring with libdir option solves the problem.

# ./configure  --prefix=/usr --libdir=/usr/lib64

Rene, can you please retain remote access during this weekend, I will
try to add support for memory mapped IO too. 

Till then Albert suggested you can configure IPMI using the vendor
supplied tool and use GNU FreeIPMI from a remote system. Most of the
GNU FreeIPMI (0.2.0) tools will work remotely too.

Anand Babu 
GPG Key ID: 0x62E15A31
Blog []              
The GNU Operating System []  

reply via email to

[Prev in Thread] Current Thread [Next in Thread]