Hello! I try to set up BMC alerting - i want setup my host (IBM server) with FreeBSD to sent alert to my IBM Director's host via snmp. I try following utilities ftom ports: freeipmi anf ipmitool I can set IP adreess of BMC controller, netmask, gw, i can set IP adress of destination host and alert type to PET, but i can't set PEF alert policy.
'ipmitool pef policy' in null I've try freeipmi - 'pef-config - o pef_file', setup policy in with file and load it to bmc controller via 'pef-config --commit -f pef_file', but nothing cange
How can i enable alert policy? May be i can use RAW?
This is my config, obtained via remote by pefconfig
pefconfig ver 2.4 Opening connection to node 172.16.9.91 ...
Connected to node 172.16.9.91 -- BMC version 1.27, IPMI version 2.0
pefconfig: GetPefEntry ... PEFilter(01): 01 Temperature event - enabled for alert PEFilter(02): 07 BIOS event - enabled for alert
PEFilter(03): 08 Power Supply event - enabled for alert PEFilter(04): 08 Power Supply event - enabled for alert PEFilter(05): 02 Voltage event - enabled for alert PEFilter(06): 02 Voltage event - enabled for alert
PEFilter(07): 02 Voltage event - enabled for alert PEFilter(08): 1b Other event - enabled for alert PEFilter(09): ff Other event - enabled for alert PEFilter(10): empty PEFilter(11): 12 System Restart event - enabled for alert
PEFilter(12): 20 OS Critical Stop event - enabled for alert PEFilter(13): 09 Power Unit event - enabled for alert PEFilter(14): 09 Power Unit event - enabled for alert PEFilter(15): 09 Power Unit event - enabled for alert
PEFilter(16): 09 Power Unit event - enabled for alert GetPefEntry(6/17): completion code=c9 GetPefEntry(17), ret = -1 GetPefEntry(6/18): completion code=c9 GetPefEntry(18), ret = -1 GetPefEntry(6/19): completion code=c9
GetPefEntry(19), ret = -1 GetPefEntry(6/20): completion code=c9 GetPefEntry(20), ret = -1 PEF Control: 03 PEFenable DoEventMsgs PEF Actions: 0e PwrDn Reset PwrCyc PEF Startup Delay: 60 sec PEF Alert Startup Delay: 60 sec
PEF Alert Policy[1]: 01 10 11 00 Disabled PEF Alert Policy[2]: 02 00 00 00 Disabled PEF Alert Policy[3]: 03 00 00 00 Disabled PEF Alert Policy[4]: 04 00 00 00 Disabled
pefconfig: GetLanEntry for channel 1 ...
Lan Param(0) Set in progress: 01 Lan Param(1) Auth type support: 17 None MD2 MD5 Pswd Lan Param(2) Auth type enables: 17 17 17 17 00 Lan Param(3) IP address: 172 16 9 91 Lan Param(4) IP addr src: 01 Static
Lan Param(5) MAC addr: 00 14 5e f9 eb ef Lan Param(6) Subnet mask: 255 255 0 0 Lan Param(7) IPv4 header: 40 40 10 Lan Param(10) BMC grat ARP : 03 Lan Param(11) grat ARP interval: 04 Lan Param(12) Def gateway IP: 172 16 0 1
Lan Param(13) Def gateway MAC: 00 00 00 00 00 00 Lan Param(14) Sec gateway IP: 0 0 0 0 Lan Param(15) Sec gateway MAC: 00 00 00 00 00 00 Lan Param(16) Community string: public Lan Param(17) Num dest: 04
Lan Param(18) Dest type: 01 00 00 00 00 Lan Param(18) Dest type: 02 00 00 00 00 Lan Param(18) Dest type: 03 80 00 00 00 Lan Param(18) Dest type: 04 00 00 00 00 Lan Param(19) Dest address: 01 00 00 [172 16 6 248] 00 1b fc a3 d0 27
Lan Param(19) Dest address: 02 00 00 [172 16 6 248] ff ff ff ff ff ff Lan Param(19) Dest address: 03 00 00 [0 0 0 0] ff ff ff ff ff ff Lan Param(19) Dest address: 04 00 00 [0 0 0 0] ff ff ff ff ff ff GetLanEntry: completion code=80
GetLanEntry(192), ret = -1 GetLanEntry: completion code=80 GetLanEntry(193), ret = -1 GetLanEntry: completion code=80 GetLanEntry(194), ret = -1 GetChanAcc(lan), ret = 0, new value = 02 Access = Always Avail, PEF Alerts Enabled
Channel Access Mode(Lan): 02 04 GetSOL for channel 1 ... SOL Enable: 01 enabled SOL Auth: 82 User SOL Accum Interval: 1e c8 150 msec SOL Retry Interval: 07 30 480 msec SOL nvol Baud Rate: 07 19.2k
SOL vol Baud Rate: 07 19.2k SOL Payload Access(1,1): 00 00 00 00 disabled SOL Payload Support(1): 03 00 3f 00 00 00 00 00 Get User Access(1): 04 04 01 34 IPMI, Admin () Get User Access(2): 04 04 01 34 IPMI, Admin (USERID)
Get User Access(3): 04 04 01 13 IPMI, Operator (operator) Get User Access(4): 04 04 01 14 IPMI, Admin (admin) pefconfig: completed successfully