[Freeipmi-devel] Re: [Freeipmi-users] freeipmi on freebsd 4.x

[Al Chu]

On Fri, 2007-12-07 at 15:49 +0530, Sharad Chandra wrote:
> Hi,
> 
> >
> > Do you happen to have another IPMI card for that system?  I am still
> > wondering if that card is bad.  Although I no longer have a motherboard
> > from that specific Supermicro product line, I know that FreeIPMI has
> > worked fine before and (at minimum) has been able to detect the IPMI card
> > properly.
> >
> 
> Changing the card helped, Now i can read 19 sensors that includes (Fan, 
> Voltage, Temperature, and one Platform Chassis Intrusion, and one Power 
> Supply). But I think there should be around 100s of sensors.
> 
> How to make sure there are only 19 sensors? Do i need to talk vendor for the 
> list?

Hey Sharad,

That's good news.  I guess the IPMI card was just bad.

I suppose the only "official" way is to get a list from the vendor.  But
19 sensors seems to be about right.  As a comparison, on my Supermicro
board, which has 4 sockets/8cores, I have 29 sensors.

3: CPU1 Temp (Temperature): 19.00 C (NA/78.00): [OK]
4: CPU2 Temp (Temperature): 21.00 C (NA/78.00): [OK]
5: CPU3 Temp (Temperature): 59.00 C (NA/78.00): [OK]
6: CPU4 Temp (Temperature): 44.00 C (NA/78.00): [OK]
7: Sys Temp (Temperature): 28.00 C (NA/78.00): [OK]
8: CPU1 Vcore (Voltage): 1.26 V (1.06/1.63): [OK]
9: CPU2 Vcore (Voltage): 1.26 V (1.06/1.63): [OK]
10: CPU3 Vcore (Voltage): 1.22 V (1.04/1.65): [OK]
11: CPU4 Vcore (Voltage): 1.23 V (1.04/1.65): [OK]
12: 3.3V (Voltage): 3.25 V (2.93/3.66): [OK]
13: 5V (Voltage): 4.80 V (4.44/5.54): [OK]
14: 12V (Voltage): 12.10 V (10.56/13.44): [OK]
15: 5VSB (Voltage): 4.80 V (4.44/5.54): [OK]
16: VBAT (Voltage): 3.07 V (2.93/3.66): [OK]
17: Fan1 (Fan): 5000.00 RPM (300.00/NA): [OK]
18: Fan2 (Fan): 5000.00 RPM (300.00/NA): [OK]
19: Fan3/CPU2 (Fan): 0.00 RPM (300.00/NA): [At or Below (<=) Lower Non-
Recoverable Threshold]
20: Fan4/CPU1 (Fan): 0.00 RPM (300.00/NA): [At or Below (<=) Lower Non-
Recoverable Threshold]
21: Fan5 (Fan): 0.00 RPM (300.00/NA): [At or Below (<=) Lower Non-
Recoverable Threshold]
22: Fan6 (Fan): 0.00 RPM (300.00/NA): [At or Below (<=) Lower Non-
Recoverable Threshold]
23: Fan7/CPU3 (Fan): 4900.00 RPM (300.00/NA): [OK]
24: Fan8/CPU4 (Fan): 0.00 RPM (300.00/NA): [OK]
25: Fan9 (Fan): 0.00 RPM (300.00/NA): [OK]
26: Power Supply 1 (Power Supply): [Presence detected]
27: Power Supply 2 (Power Supply): [Presence detected]
28: Intrusion (Platform Chassis Intrusion): [General Chassis Intrusion]
29: CPU Internal Er (Module/Board): [OK]
30: CPU Overheat (Module/Board): [State Asserted]
31: Thermal Trip (Module/Board): [OK]

Al

> Thanks
> Sharad Chandra
-- 
Albert Chu
address@hidden
925-422-5311
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory