freeipmi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Freeipmi-devel] FreeIPMI-0.7.1 and HP DL 585


From: Won De Erick
Subject: [Freeipmi-devel] FreeIPMI-0.7.1 and HP DL 585
Date: Tue, 18 Nov 2008 17:57:15 -0800 (PST)

Hi Al,

I installed FreeIPMI 0.7.1 to my HP DL585 Box running FreeBSD 7.1 Beta2.
Based from dmidecode output (see attached file for the complete output), the 
box supports IPMIv2.0.
But ipmi-locate seems reporting a different version for IPMI, v1.5

I then tried running some tools like ipmi-sensors and ipmi-monitoring, but it 
seems that I am getting too few device informations/statuses. i don't know if 
the displayed devices are the only ones currently installed/supported on the 
board.

Is this normal?

See below sample outputs.

Thanks,

Won


------------------------------------------------------------------------------------------------------------------
# dmidecode  (See attached file for the complete result)
....
Handle 0x2600, DMI type 38, 18 bytes
IPMI Device Information
        Interface Type: KCS (Keyboard Control Style)
        Specification Version: 2.0
        I2C Slave Address: 0x10
        NV Storage Device: Not Present
        Base Address: 0x0000000000000CA2 (I/O)
        Register Spacing: Successive Byte Boundaries
....

# bmc-info --version
bmc-info - 0.7.1
Copyright (C) 2003-2008 FreeIPMI Core Team
This program is free software; you may redistribute it under the terms of
the GNU General Public License.  This program has absolutely no warranty.


# bmc-info
Device ID:         11
Device Revision:   1
                   [SDR Support]
Firmware Revision: 1.60
                   [Device Available (normal operation)]
IPMI Version:      2.0
Additional Device Support:
                   [Sensor Device]
                   [SDR Repository Device]
                   [SEL Device]
                   [FRU Inventory Device]
Manufacturer ID:   Bh
Product ID:        0h
fiid_obj_get: auxiliary_firmware_revision_info: no data set



hpdl585# ipmi-locate
Probing KCS device using DMIDECODE... done
IPMI Version: 2.0
IPMI locate driver: DMIDECODE
IPMI interface: KCS
BMC driver device:
BMC I/O base address: 0xCA2
Register spacing: 1

Probing SMIC device using DMIDECODE... FAILED

Probing BT device using DMIDECODE... FAILED

Probing SSIF device using DMIDECODE... FAILED

Probing KCS device using SMBIOS... FAILED

Probing SMIC device using SMBIOS... FAILED

Probing BT device using SMBIOS... FAILED

Probing SSIF device using SMBIOS... FAILED

Probing KCS device using ACPI... FAILED

Probing SMIC device using ACPI... FAILED

Probing BT device using ACPI... FAILED

Probing SSIF device using ACPI... FAILED

Probing KCS device using PCI... FAILED

Probing SMIC device using PCI... FAILED

Probing BT device using PCI... FAILED

Probing SSIF device using PCI... FAILED

KCS device default values:
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: KCS
BMC driver device:
BMC I/O base address: 0xCA2
Register spacing: 1

SMIC device default values:
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: SMIC
BMC driver device:
BMC I/O base address: 0xCA9
Register spacing: 1

BT device default values:
SSIF device default values:
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: SSIF
BMC driver device: /dev/i2c-0
BMC SMBUS slave address: 0x42
Register spacing: 1


# ipmi-sensors
1: UID Light (OEM Reserved): [OEM State = 0000h]
2: Int. Health LED (OEM Reserved): [OEM State = 0000h]
3: Ext. Health LED (OEM Reserved): [OEM State = 0000h]
4: VRM 1 (Power Unit): [Device Inserted/Device Present]
5: VRM 2 (Power Unit): [Device Inserted/Device Present]
6: VRM 3 (Power Unit): [Device Inserted/Device Present]
7: VRM 4 (Power Unit): [Device Inserted/Device Present]
8: Power Supply 1 (Power Supply): [Presence detected]
9: Power Supply 2 (Power Supply): [Presence detected]
10: Power Supplies (Power Supply): [Fully Redundant]
12: Fan 1 (Fan): [transition to Running]
13: Fan 2 (Fan): [transition to Running]
14: Fan 3 (Fan): [transition to Running]
15: Fan 4 (Fan): [transition to Running]
16: Fan 5 (Fan): [transition to Running]
17: Fan 6 (Fan): [transition to Running]
18: Fans (Fan): [Fully Redundant]

# ipmimonitoring
Record_ID | Sensor Name | Sensor Group | Monitoring Status| Sensor Units | 
Sensor Reading
8 | Power Supply 1 | Power Supply | Nominal | N/A | 'Presence detected'
9 | Power Supply 2 | Power Supply | Nominal | N/A | 'Presence detected'
10 | Power Supplies | Power Supply | Nominal | N/A | 'Fully Redundant'
18 | Fans | Fan | Nominal | N/A | 'Fully Redundant'
20 | Temp 1 | Temperature | Nominal | C | 36.000000
21 | Temp 2 | Temperature | Nominal | C | 34.000000
22 | Temp 3 | Temperature | Nominal | C | 30.000000
23 | Temp 4 | Temperature | Nominal | C | 30.000000
24 | Temp 5 | Temperature | Nominal | C | 7.000000
25 | Temp 6 | Temperature | Nominal | C | 24.000000
26 | Temp 7 | Temperature | Nominal | C | 24.000000
27 | Temp 8 | Temperature | Nominal | C | 26.000000
28 | Temp 9 | Temperature | Nominal | C | 26.000000


      

Attachment: hpdl585-dmidecode.txt
Description: Text document


reply via email to

[Prev in Thread] Current Thread [Next in Thread]