Re: [Freeipmi-devel] make install issue in freeipmi-0.8.2.beta3

[Al Chu]

Hey Andy,

If I'm not mistaken, the in-band in ipmiutil is via "normal" Windows,
not Cygwin?

Al

On Thu, 2009-12-24 at 07:29 -0800, Andy Cress wrote:
> There is a closed-source port of ipmitool from Sun that apparently has
> some in-band Windows support with a special Sun driver, but the only
> open-source IPMI support for Windows in-band is via ipmiutil
> (http://*ipmiutil.sf.net), which supports both the Intel driver and
> the Microsoft driver.  
> 
>  
> 
> Andy
> 
>  
> 
> From:address@hidden
> [mailto:address@hidden
> On Behalf Of sandeep patra
> Sent: Wednesday, December 23, 2009 1:07 AM
> To: address@hidden
> Cc: address@hidden
> Subject:  Re: [Freeipmi-devel] make install issue in
> freeipmi-0.8.2.beta3 
> 
> 
>  
> 
> Hi Albert,
> I have used the default --prefix option. (i.e. ./configure without any
> --prefix option)
> 
> I did modifications in two Makefiles to complete the "make install"
> step
> those file were
> bmc-watchdog/Makefile 
> ipmi-pef-config/src/Makefile 
> 
> the changes that i did was (in the ipmi-pef-config/src/Makefile )
> previous:
> $(install_sh) -d -m 755 $(DESTDIR)/$(sbindir)
> cp -d ./pef-config $(DESTDIR)/$(sbindir)
> 
> modified to:
> $(install_sh) -d -m 755 $(DESTDIR)$(sbindir)
> cp -d ./pef-config $(DESTDIR)$(sbindir)
> 
> I did this steps manually [as these Makefiles were generated
> automatically after ./configure].
> 
> After doing above two steps all the exe's were installed to the
> location /usr/local/sbin/. 
> when i run commands likes ipmimonitoring or ipmi-sensors, it is giving
> me error like "permission denied"
> 
> Thanks and  Regards,
> Sandeep Kumar Patra
> 
>  
> 
> On Tue, Dec 22, 2009 at 7:53 PM, Al Chu <address@hidden> wrote:
> 
> Hi Sandeep,
> 
> >From the README.build file
> 
> ----
> By default files will typically be installed in /usr/local (binaries
> in /usr/local/bin, libraries in /usr/local/lib, configuration files in
> /usr/local/etc/, etc.).  To install into the more common locations
> such as /usr/bin, /usr/lib/, /etc, etc. the options passed into
> `./configure' must be adjusted.
> 
> The following set of options and settings are suitable for most Linux
> systems.
> 
> --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc
> --localstatedir=/var --mandir=/usr/share/man
> 
> Your mileage may vary depending on your system.
> ----
> 
> Al
> 
> 
> On Tue, 2009-12-22 at 12:31 +0530, sandeep patra wrote:
> > Hi,
> > I am trying to install freeipmi-0.8.2.beta3 on cygwin
> (CYGWIN_NT-5.1),
> > but failed to do so.
> > "./configure " and "make" commands work fine
> > but when i run "make install", it gives me following error
> >
> >
> > make[3]: Nothing to be done for `install-exec-am'.
> > /usr/bin/install -c -m 755 -d /usr/local/etc/init.d
> > /usr/bin/install -c -m
> > 755 ./bmc-watchdog.init /usr/local/etc/init.d/bmc-watchdo
> > g
> > /usr/bin/install -c -m 755 -d //usr/local/etc/sysconfig
> > /usr/bin/install: cannot create directory `//usr': No such file or
> > directory
> > make[3]: *** [install-init-scripts] Error 1
> > make[3]: Leaving directory
> > `/home/Administrator/freeipmi_issue/fresh_freeipmi/fr
> > eeipmi-0.8.2.beta3/bmc-watchdog'
> > make[2]: *** [install-am] Error 2
> > make[2]: Leaving directory
> > `/home/Administrator/freeipmi_issue/fresh_freeipmi/fr
> > eeipmi-0.8.2.beta3/bmc-watchdog'
> > make[1]: *** [install-recursive] Error 1
> > make[1]: Leaving directory
> > `/home/Administrator/freeipmi_issue/fresh_freeipmi/fr
> > eeipmi-0.8.2.beta3/bmc-watchdog'
> > make: *** [install-recursive] Error 1
> >
> >
> > No idea, why the path for sysconfig file
> > is //usr/local/etc/sysconfig ????
> >
> >
> >
> >
> > Thanks and Regards,
> > Sandeep Kumar Patra
> >
> >
> >
> >
> >
> >
> 
> 
> > _______________________________________________
> > Freeipmi-devel mailing list
> > address@hidden
> > http://**lists.gnu.org/mailman/listinfo/freeipmi-devel
> --
> Albert Chu
> address@hidden
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
> 
> 
>  
> 
> 
> The information contained in this document is CONFIDENTIAL and
> property of Kontron. Any unauthorized review, use, disclosure or
> distribution is prohibited without express written consent of Kontron.
> If you are not the intended recipient, please contact the sender and
> destroy all copies of the original message and enclosed attachments.
-- 
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory