On Mon, 2011-05-09 at 06:35 -0700, Reu Peter wrote:
> Hello,
>
> some OEM Sensors can't be read.
>
> Hardware: HP DL360 G6
>
>
> bmc-info
>
> Device ID : 17
> Device Revision : 1
> Device SDRs : supported
> Firmware Revision : 2.05
> Device Available : yes (normal operation)
> IPMI Version : 2.0
> Sensor Device : supported
> SDR Repository Device : supported
> SEL Device : supported
> FRU Inventory Device : supported
> IPMB Event Receiver : unsupported
> IPMB Event Generator : unsupported
> Bridge : unsupported
> Chassis Device : unsupported
> Manufacturer ID : Hewlett-Packard (11)
> Product ID : 8192
>
> Channel Information
>
> Channel Number : 2
> Medium Type : 802.3 LAN
> Protocol Type : IPMB-1.0
> Active Session Count : 0
> Session Support : multi-session
> Vendor ID : Intelligent Platform Management Interface forum
> (7154)
>
> Channel Number : 7
> Medium Type : OEM
> Protocol Type : KCS
> Active Session Count : 0
> Session Support : session-less
> Vendor ID : Intelligent Platform Management Interface forum
> (7154)
>
>
> pmi-sensors -V
>
> ipmi-sensors - 1.0.4
> Copyright (C) 2003-2010 FreeIPMI Core Team
> This program is free software; you may redistribute it under the terms
> of
> the GNU General Public License. This program has absolutely no
> warranty.
> ipmi-sensors --flush-cache
>
> ipmi-sensors --interpret-oem-data --output-sensor-state
>
> ID | Name | Type | State | Reading | Units |
> Event
> 1 | VRM 1 | Power Unit | Nominal | N/A | N/A |
> 'Device Inserted/Device Present'
> 2 | VRM 2 | Power Unit | Nominal | N/A | N/A |
> 'Device Inserted/Device Present'
> 3 | UID Light | OEM Reserved | N/A | N/A | N/A |
> 'OEM Event = 0000h'
> 4 | Int. Health LED | OEM Reserved | N/A | N/A | N/A |
> 'OEM Event = 0000h'
> 5 | Ext. Health LED | OEM Reserved | N/A | N/A | N/A |
> 'OEM Event = 0000h'
> 6 | Power Supply 1 | Power Supply | Nominal | N/A | N/A |
> 'Presence detected'
> 7 | Power Supply 2 | Power Supply | Nominal | N/A | N/A |
> 'Presence detected'
> 8 | Power Supplies | Power Supply | Nominal | N/A | N/A |
> 'Fully Redundant'
> 10 | Fan Block 1 | Fan | Nominal | N/A | N/A |
> 'transition to Running'
> 11 | Fan Block 2 | Fan | N/A | N/A | N/A |
> N/A
> 12 | Fan Block 3 | Fan | Nominal | N/A | N/A |
> 'transition to Running'
> 13 | Fan Block 4 | Fan | Nominal | N/A | N/A |
> 'transition to Running'
> 14 | Fans | Fan | Nominal | N/A | N/A |
> 'Fully Redundant'
> 16 | Temp 1 | Temperature | Nominal | 18.00 | C |
> 'OK'
> 17 | Temp 2 | Temperature | Nominal | 40.00 | C |
> 'OK'
> 18 | Temp 3 | Temperature | N/A | N/A | C |
> N/A
> 19 | Temp 4 | Temperature | Nominal | 29.00 | C |
> 'OK'
> 20 | Temp 5 | Temperature | Nominal | 31.00 | C |
> 'OK'
> 21 | Temp 6 | Temperature | Nominal | 29.00 | C |
> 'OK'
> 22 | Temp 7 | Temperature | Nominal | 30.00 | C |
> 'OK'
> 23 | Temp 8 | Temperature | N/A | N/A | C |
> N/A
> 24 | Temp 9 | Temperature | Nominal | 28.00 | C |
> 'OK'
> 25 | Temp 10 | Temperature | N/A | N/A | C |
> N/A
> 26 | Temp 11 | Temperature | Nominal | 28.00 | C |
> 'OK'
> 27 | Temp 12 | Temperature | Nominal | 30.00 | C |
> 'OK'
> 28 | Temp 13 | Temperature | Nominal | 46.00 | C |
> 'OK'
> 29 | Temp 14 | Temperature | Nominal | 26.00 | C |
> 'OK'
> 30 | Temp 15 | Temperature | Nominal | 29.00 | C |
> 'OK'
> 31 | Temp 16 | Temperature | Nominal | 31.00 | C |
> 'OK'
> 32 | Temp 17 | Temperature | Nominal | 25.00 | C |
> 'OK'
> 33 | Temp 18 | Temperature | Nominal | 37.00 | C |
> 'OK'
> 34 | Temp 19 | Temperature | Nominal | 33.00 | C |
> 'OK'
> 35 | Temp 20 | Temperature | Nominal | 35.00 | C |
> 'OK'
> 36 | Temp 21 | Temperature | Nominal | 41.00 | C |
> 'OK'
> 37 | Temp 22 | Temperature | Nominal | 38.00 | C |
> 'OK'
> 38 | Temp 23 | Temperature | Nominal | 39.00 | C |
> 'OK'
> 39 | Temp 24 | Temperature | Nominal | 45.00 | C |
> 'OK'
> 40 | Temp 25 | Temperature | Nominal | 34.00 | C |
> 'OK'
> 41 | Temp 26 | Temperature | Nominal | 45.00 | C |
> 'OK'
> 42 | Temp 27 | Temperature | Nominal | 25.00 | C |
> 'OK'
> 43 | Temp 28 | Temperature | Nominal | 71.00 | C |
> 'OK'
> 44 | Power Meter | Current | N/A | N/A | N/A |
> 'Device Enabled'
> 45 | Memory | Memory | Warning | N/A | N/A |
> 'Correctable memory error'
>
>
> ipmi-sensors --interpret-oem-data --output-sensor-state
> --ignore-not-available-sensors
>
> ID | Name | Type | State | Reading | Units |
> Event
> 1 | VRM 1 | Power Unit | Nominal | N/A | N/A |
> 'Device Inserted/Device Present'
> 2 | VRM 2 | Power Unit | Nominal | N/A | N/A |
> 'Device Inserted/Device Present'
> 3 | UID Light | OEM Reserved | N/A | N/A | N/A |
> 'OEM Event = 0000h'
> 4 | Int. Health LED | OEM Reserved | N/A | N/A | N/A |
> 'OEM Event = 0000h'
> 5 | Ext. Health LED | OEM Reserved | N/A | N/A | N/A |
> 'OEM Event = 0000h'
> 6 | Power Supply 1 | Power Supply | Nominal | N/A | N/A |
> 'Presence detected'
> 7 | Power Supply 2 | Power Supply | Nominal | N/A | N/A |
> 'Presence detected'
> 8 | Power Supplies | Power Supply | Nominal | N/A | N/A |
> 'Fully Redundant'
> 10 | Fan Block 1 | Fan | Nominal | N/A | N/A |
> 'transition to Running'
> 12 | Fan Block 3 | Fan | Nominal | N/A | N/A |
> 'transition to Running'
> 13 | Fan Block 4 | Fan | Nominal | N/A | N/A |
> 'transition to Running'
> 14 | Fans | Fan | Nominal | N/A | N/A |
> 'Fully Redundant'
> 16 | Temp 1 | Temperature | Nominal | 18.00 | C |
> 'OK'
> 17 | Temp 2 | Temperature | Nominal | 40.00 | C |
> 'OK'
> 19 | Temp 4 | Temperature | Nominal | 28.00 | C |
> 'OK'
> 20 | Temp 5 | Temperature | Nominal | 31.00 | C |
> 'OK'
> 21 | Temp 6 | Temperature | Nominal | 28.00 | C |
> 'OK'
> 22 | Temp 7 | Temperature | Nominal | 30.00 | C |
> 'OK'
> 24 | Temp 9 | Temperature | Nominal | 28.00 | C |
> 'OK'
> 26 | Temp 11 | Temperature | Nominal | 28.00 | C |
> 'OK'
> 27 | Temp 12 | Temperature | Nominal | 30.00 | C |
> 'OK'
> 28 | Temp 13 | Temperature | Nominal | 46.00 | C |
> 'OK'
> 29 | Temp 14 | Temperature | Nominal | 26.00 | C |
> 'OK'
> 30 | Temp 15 | Temperature | Nominal | 29.00 | C |
> 'OK'
> 31 | Temp 16 | Temperature | Nominal | 31.00 | C |
> 'OK'
> 32 | Temp 17 | Temperature | Nominal | 25.00 | C |
> 'OK'
> 33 | Temp 18 | Temperature | Nominal | 37.00 | C |
> 'OK'
> 34 | Temp 19 | Temperature | Nominal | 34.00 | C |
> 'OK'
> 35 | Temp 20 | Temperature | Nominal | 35.00 | C |
> 'OK'
> 36 | Temp 21 | Temperature | Nominal | 41.00 | C |
> 'OK'
> 37 | Temp 22 | Temperature | Nominal | 38.00 | C |
> 'OK'
> 38 | Temp 23 | Temperature | Nominal | 39.00 | C |
> 'OK'
> 39 | Temp 24 | Temperature | Nominal | 45.00 | C |
> 'OK'
> 40 | Temp 25 | Temperature | Nominal | 34.00 | C |
> 'OK'
> 41 | Temp 26 | Temperature | Nominal | 45.00 | C |
> 'OK'
> 42 | Temp 27 | Temperature | Nominal | 25.00 | C |
> 'OK'
> 43 | Temp 28 | Temperature | Nominal | 71.00 | C |
> 'OK'
> 44 | Power Meter | Current | N/A | N/A | N/A |
> 'Device Enabled'
> 45 | Memory | Memory | Warning | N/A | N/A |
> 'Correctable memory error'
>
>
> ipmi-sensors --interpret-oem-data --output-sensor-state -v
> --record-ids=1,2,3,4,5,6,7,8,9,10,11,12,13,14,44,45
>
> Record ID: 1
> ID String: VRM 1
> Sensor Type: Power Unit (9h)
> Sensor Number: 1
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: processor module (9)
> Entity Instance: 1
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: 8h
> Sensor State: Nominal
> Sensor Event: 'Device Inserted/Device Present'
>
> Record ID: 2
> ID String: VRM 2
> Sensor Type: Power Unit (9h)
> Sensor Number: 2
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: processor module (9)
> Entity Instance: 2
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: 8h
> Sensor State: Nominal
> Sensor Event: 'Device Inserted/Device Present'
>
> Record ID: 3
> ID String: UID Light
> Sensor Type: OEM Reserved (C0h)
> Sensor Number: 3
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: system chassis (23)
> Entity Instance: 1
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: 70h
> Sensor State: N/A
> Sensor Event: 'OEM Event = 0000h'
>
> Record ID: 4
> ID String: Int. Health LED
> Sensor Type: OEM Reserved (C0h)
> Sensor Number: 4
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: system chassis (23)
> Entity Instance: 2
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: 71h
> Sensor State: N/A
> Sensor Event: 'OEM Event = 0000h'
>
> Record ID: 5
> ID String: Ext. Health LED
> Sensor Type: OEM Reserved (C0h)
> Sensor Number: 5
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: system chassis (23)
> Entity Instance: 3
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: 71h
> Sensor State: N/A
> Sensor Event: 'OEM Event = 0000h'
>
> Record ID: 6
> ID String: Power Supply 1
> Sensor Type: Power Supply (8h)
> Sensor Number: 6
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: power supply (10)
> Entity Instance: 1
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: 6Fh
> Sensor State: Nominal
> Sensor Event: 'Presence detected'
>
> Record ID: 7
> ID String: Power Supply 2
> Sensor Type: Power Supply (8h)
> Sensor Number: 7
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: power supply (10)
> Entity Instance: 2
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: 6Fh
> Sensor State: Nominal
> Sensor Event: 'Presence detected'
>
> Record ID: 8
> ID String: Power Supplies
> Sensor Type: Power Supply (8h)
> Sensor Number: 8
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: power supply (10)
> Entity Instance: 3
> Entity Instance Type: Logical Container Entity
> Event/Reading Type Code: Bh
> Sensor State: Nominal
> Sensor Event: 'Fully Redundant (formerly "Redundancy Regained")'
>
> Record ID: 10
> ID String: Fan Block 1
> Sensor Type: Fan (4h)
> Sensor Number: 9
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: system board (7)
> Entity Instance: 1
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: Ah
> Sensor State: Nominal
> Sensor Event: 'transition to Running'
>
> Record ID: 11
> ID String: Fan Block 2
> Sensor Type: Fan (4h)
> Sensor Number: 10
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: system board (7)
> Entity Instance: 2
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: Ah
> Sensor State: N/A
> Sensor Event: N/A
>
> Record ID: 12
> ID String: Fan Block 3
> Sensor Type: Fan (4h)
> Sensor Number: 11
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: system board (7)
> Entity Instance: 3
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: Ah
> Sensor State: Nominal
> Sensor Event: 'transition to Running'
>
> Record ID: 13
> ID String: Fan Block 4
> Sensor Type: Fan (4h)
> Sensor Number: 12
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: system board (7)
> Entity Instance: 4
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: Ah
> Sensor State: Nominal
> Sensor Event: 'transition to Running'
>
> Record ID: 14
> ID String: Fans
> Sensor Type: Fan (4h)
> Sensor Number: 13
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: system board (7)
> Entity Instance: 5
> Entity Instance Type: Logical Container Entity
> Event/Reading Type Code: Bh
> Sensor State: Nominal
> Sensor Event: 'Fully Redundant (formerly "Redundancy Regained")'
>
> Record ID: 44
> ID String: Power Meter
> Sensor Type: Current (3h)
> Sensor Number: 42
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: system board (7)
> Entity Instance: 7
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: 9h
> Sensor State: N/A
> Sensor Event: 'Device Enabled'
>
> Record ID: 45
> ID String: Memory
> Sensor Type: Memory (Ch)
> Sensor Number: 43
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: system board (7)
> Entity Instance: 8
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: 6Fh
> Sensor State: Warning
> Sensor Event: 'Correctable ECC/other correctable memory error'
>
>
>
> Best regards!
>
> Peter Reu
>
>
> Bezirk Mittelfranken
> Referat 4
> Bildung, Umwelt und IT
> Feuchtwanger Str. 38
> 91522 Ansbach
>
> Tel.:
+49 981 4664 - 1243
> Fax:
+49 981 4664 - 1289
> Mail:
address@hidden
>
> Diese E-Mail ist vertraulich. Wenn Sie nicht der rechtmässige
> Empfänger
> sind, düfen Sie den Inhalt weder kopieren, verbreiten noch benutzen.
> Sollten Sie diese E-Mail versehentlich erhalten haben, senden Sie
> diese bitte
> an mich zurück und löschen diese anschliessend.
>
> This E-Mail is confidential. If you are not the intended recipient,
> you must
> not copy, disclose or use its contents. If you have received it in
> error,
> please inform me immediately by return E-Mail and delete the document.
>
>