Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply

This branch: http://svn.savannah.gnu.org/svn/freeipmi/branches/Release-1_4_0_branch/ ?

If so:

38824 ./ipmi-oem --debug -u ADMIN -p ADMIN -h 192.168.70.207 supermicro get-power-supply-status2 1 &> oem_debug_1

38825 ./ipmi-oem --debug -u ADMIN -p ADMIN -h 192.168.70.207 supermicro get-power-supply-status2 2 &> oem_debug_2

38826 ./ipmi-oem --debug -u ADMIN -p ADMIN -h 192.168.70.207 supermicro get-power-supply-status2 1 &> oem_debug_1bad

Thanks,

Scott

On Wed, Oct 14, 2015 at 12:35 PM, Albert Chu <address@hidden> wrote:

Hey Scott,

I've merged a change into the 1-4-0-devel branch. Could you give it
another shot?

svn co
http://svn.savannah.gnu.org/svn/freeipmi/branches/Release-1_4_0_branch/ freeipmi
cd freeipmi
./autogen.sh
./configure
make
ipmi-oem/ipmi-oem supermicro get-power-supply-status2 1
ipmi-oem/ipmi-oem supermicro get-power-supply-status2 2

Al

On Tue, 2015-09-22 at 14:22 -0700, Albert Chu wrote:
> Hey Scott,
>
> I'm probably assuming something incorrectly about what will be returned.
>
> Could you show the output w/ --debug. If you can, a ps1 & ps2 output
> and also a "bad" case when the power cable is out.
>
> Thanks,
>
> Al
>
> On Tue, 2015-09-22 at 15:46 -0500, Scott Silverman wrote:
> > I tested with your latest changes, it returns:
> >
> >
> > supermicro:get-power-supply-status2 invalid response length: 3,
> > expected 4
> >
> >
> >
> >
> >
> >
> >
> >
> > Thanks,
> >
> >
> > Scott Silverman | IT | Simplex | 312-360-2444
> > 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604
> >
> > On Tue, Sep 15, 2015 at 5:50 PM, Albert Chu <address@hidden> wrote:
> > On Tue, 2015-09-15 at 09:01 -0500, Scott Silverman wrote:
> > > I ran the command with debug, but there's no difference at
> > all between
> > > the output when the cable is plugged/unplugged.
> > >
> > >
> > > I've also received a follow-up from SuperMicro who tell me
> > the
> > > following should work (but they specifically say "don't use
> > it"
> > > because of some vague statement that it "could affect other
> > > functionality").
> > >
> > >
> > > PSU1: 0x06 0x52 0x07 0xb0 0x02 0x79
> > >
> > > PSU2: 0x06 0x52 0x07 0xb2 0x02 0x79
> > >
> > >
> > >
> > > Returns of 00 or 02 mean good, anything else (or failed
> > command) mean
> > > bad, according to SM.
> > >
> > >
> > > I tested it, and I get a return of "00 00" on a good PSU1
> > and a "02
> > > 00" on a good PSU2. A bad PSU1 returns "4b 28".
> >
> > Hmmmm ... this is disconcerting, because you'd like some
> > consistent
> > output.
> >
> > I take it both bytes have to be 00 or 02? Otherwise there's
> > no point in
> > reading two bytes (that's what the 0x02 is in the raw
> > command).
> >
> > Nevertheless, I added it based on this assumption. Could you
> > give it a
> > shot? It's in a different branch than last time:
> >
> > svn co
> > http://svn.savannah.gnu.org/svn/freeipmi/branches/Release-1_4_0_branch/ freeipmi
> > cd freeipmi
> > ./autogen.sh
> > ./configure
> > make
> > ipmi-oem/ipmi-oem supermicro get-power-supply-status2 1
> > ipmi-oem/ipmi-oem supermicro get-power-supply-status2 2
> >
> > Al
> >
> > >
> > >
> > > That said, given their warning of "don't use this", I don't
> > know what
> > > good that is.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Thanks,
> > >
> > >
> > > Scott Silverman | IT | Simplex | 312-360-2444
> > > 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604
> > >
> > > On Thu, Sep 10, 2015 at 11:51 AM, Albert Chu
> > <address@hidden> wrote:
> > > On Thu, 2015-09-10 at 09:31 -0500, Scott Silverman
> > wrote:
> > > > I had a chance to test pulling the power cable, it
> > seems
> > > that what
> > > > SuperMicro gave me is not useful, as even with the
> > power
> > > cable pulled,
> > > > it still returns "00". I will reach out to them
> > and see if I
> > > can get
> > > > some clarification, but I would suggest not
> > putting in the
> > > change as
> > > > is.
> > >
> > > The change is already in there, but we can change it
> > once we
> > > have more
> > > info.
> > >
> > > If you do a --debug on the good node vs bad node,
> > maybe we can
> > > figure it
> > > out. Perhaps there are additional bytes returned.
> > >
> > > Al
> > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Thanks,
> > > >
> > > >
> > > > Scott Silverman | IT | Simplex | 312-360-2444
> > > > 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604
> > > >
> > > > On Wed, Sep 9, 2015 at 4:24 PM, Albert Chu
> > <address@hidden>
> > > wrote:
> > > > Cool, it'll be in the next release of
> > FreeIPMI.
> > > >
> > > > Al
> > > >
> > > > On Wed, 2015-09-09 at 14:41 -0500, Scott
> > Silverman
> > > wrote:
> > > > > It appears to work, but the 00 is in
> > fact a "good"
> > > state. I
> > > > can't pull
> > > > > a power cable just now to confirm what a
> > "bad"
> > > state is, but
> > > > I'll let
> > > > > you know tomorrow.
> > > > >
> > > > >
> > > > > Thanks for such a prompt response, it's
> > much
> > > appreciated.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Thanks,
> > > > >
> > > > >
> > > > > Scott Silverman | IT | Simplex |
> > 312-360-2444
> > > > > 230 S. LaSalle St., Suite 4-100,
> > Chicago, IL 60604
> > > > >
> > > > > On Wed, Sep 9, 2015 at 1:25 PM, Albert
> > Chu
> > > <address@hidden>
> > > > wrote:
> > > > > On Wed, 2015-09-09 at 13:16
> > -0500, Scott
> > > Silverman
> > > > wrote:
> > > > > > Actually, it seems that 00 is
> > good in
> > > this case. I
> > > > asked
> > > > > supermicro
> > > > > > for confirmation on all
> > possessible
> > > values but
> > > > haven't heard
> > > > > back
> > > > > > yet.
> > > > >
> > > > > Ok, just give it a shot with
> > what's there.
> > > If I
> > > > have to
> > > > > reverse the
> > > > > values, that's just a quick
> > simple change.
> > > > >
> > > > > > I will test, probably
> > tomorrow, and get
> > > back to
> > > > you, thanks!
> > > > >
> > > > > Great!
> > > > >
> > > > > Al
> > > > >
> > > > > >
> > > > > > Scott Silverman | IT | Simplex
> > |
> > > 312-360-2444
> > > > > >
> > > > > > 230 S. LaSalle St., Suite
> > 4-100,
> > > Chicago, IL 60604
> > > > > >
> > > > > > On Sep 9, 2015 1:12 PM,
> > "Albert Chu"
> > > > <address@hidden> wrote:
> > > > > > That's not too far
> > removed from
> > > the other
> > > > > motherboard. From
> > > > > > ipmi-oem's
> > > > > > comments:
> > > > > >
> > > > > > /* Supermicro OEM
> > > > > > * From Supermicro
> > Engineer
> > > > > > *
> > > > > > * Request
> > > > > > *
> > > > > > * 0x06 - network
> > function
> > > > > > * 0x52 - cmd
> > (master
> > > read/write)
> > > > > > * 0x07 - (channel =
> > 0, bus id
> > > = 3, bus
> > > > type =
> > > > > private)
> > > > > > * 0x?? - slave
> > address
> > > > > > * - 0x70 - ps
> > 1
> > > > > > * - 0x72 - ps
> > 2
> > > > > > * - 0x74 - ps
> > 3
> > > > > > * 0x01 - read count
> > > > > > * 0x0c - data to
> > write ... no
> > > idea why
> > > > 0x0c
> > > > > > *
> > > > > > * Response
> > > > > > *
> > > > > > * 0x52 - cmd
> > > > > > * 0x?? - Completion
> > Code
> > > > > > * 0x?? - 0x01 -
> > good
> > > > > > * - 0x00 - bad
> > > > > > */
> > > > > >
> > > > > > I added yours into a
> > branch of
> > > FreeIPMI if
> > > > you could
> > > > > give it a
> > > > > > shot. I
> > > > > > just assumed the good
> > vs bad
> > > response was
> > > > the same.
> > > > > >
> > > > > > svn co
> > > > > >
> > > > >
> > > >
> > >
> > http://svn.savannah.gnu.org/svn/freeipmi/branches/supermicroipmioempower freeipmi
> > > > > > cd freeipmi
> > > > > > ./autogen.sh
> > > > > > ./configure
> > > > > > make
> > > > > > ipmi-oem/ipmi-oem
> > supermicro
> > > > > get-power-supply-status2 1
> > > > > > ipmi-oem/ipmi-oem
> > supermicro
> > > > > get-power-supply-status2 2
> > > > > >
> > > > > > As an aside, after I
> > realized
> > > that this
> > > > was going
> > > > > through the
> > > > > > master
> > > > > > read/write and not
> > some
> > > arbitrary
> > > > Supermicro OEM
> > > > > command, I
> > > > > > actually can
> > > > > > add an error message
> > for the 83h
> > > error
> > > > code you saw
> > > > > before.
> > > > > > So
> > > > > > hopefully that's taken
> > care of
> > > when you
> > > > run the
> > > > > original. I
> > > > > > get
> > > > > >
> > > > > > # ipmi-oem/ipmi-oem
> > Supermicro
> > > > > get-power-supply-status 1
> > > > > >
> > > Supermicro:get-power-supply-status failed:
> > > > NAK on
> > > > > Write
> > > > > >
> > > > > > Al
> > > > > >
> > > > > > On Wed, 2015-09-09 at
> > 12:09
> > > -0500, Scott
> > > > Silverman
> > > > > wrote:
> > > > > > > I assume that was
> > the case. If
> > > it helps,
> > > > I have
> > > > > the
> > > > > > following from
> > > > > > > SuperMicro (can only
> > confirm
> > > for the
> > > > listed board,
> > > > > I don't
> > > > > > have any
> > > > > > > other X10 to test
> > on):
> > > > > > >
> > > > > > >
> > > > > > > For the X10DRU-i+,
> > please try
> > > the
> > > > command below:
> > > > > > >
> > > > > > > raw 0x06 0x52 0x07
> > 0xb0 0x01
> > > 0x0c for
> > > > power
> > > > > supply 1
> > > > > > >
> > > > > > > raw 0x06 0x52 0x07
> > 0xb2 0x01
> > > 0x0c for
> > > > power
> > > > > supply 2
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Thanks,
> > > > > > >
> > > > > > >
> > > > > > > Scott Silverman | IT
> > | Simplex
> > > |
> > > > 312-360-2444
> > > > > > > 230 S. LaSalle St.,
> > Suite
> > > 4-100,
> > > > Chicago, IL 60604
> > > > > > >
> > > > > > > On Tue, Sep 8, 2015
> > at 12:21
> > > PM, Albert
> > > > Chu
> > > > > <address@hidden>
> > > > > > wrote:
> > > > > > > Hi Scott,
> > > > > > >
> > > > > > > Thanks for
> > the report.
> > > > Unfortunately,
> > > > > since this is
> > > > > > a
> > > > > > > Supermicro
> > > > > > > specific
> > error, not
> > > much we can
> > > > do except
> > > > > wait for a
> > > > > > potential
> > > > > > > update of
> > > > > > > information
> > from
> > > Supermicro. I
> > > > can ping
> > > > > some
> > > > > > Supermicro folks
> > > > > > > and see
> > > > > > > if they can
> > help.
> > > > > > >
> > > > > > > Al
> > > > > > >
> > > > > > > On Fri,
> > 2015-09-04 at
> > > 11:18
> > > > -0500, Scott
> > > > > Silverman
> > > > > > wrote:
> > > > > > > > Running
> > the ipmi-oem
> > > > supermicro
> > > > > > >
> > > get-(pmbus-)power-supply-status
> > > > > > > > commands
> > against
> > > newer (X10
> > > > based)
> > > > > SuperMicro
> > > > > > servers
> > > > > > > results in
> > the
> > > > > > > > following
> > error:
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > supermicro:get-pmbus-power-supply-status
> > > > > failed:
> > > > > > No error
> > > > > > > message
> > > > > > > > found for
> > command
> > > 52h, network
> > > > function
> > > > > 06h, and
> > > > > > completion
> > > > > > > code 83h.
> > > > > > > > Please
> > report to
> > > > > <address@hidden>
> > > > > > > >
> > > > > > > >
> > > > > > > > As
> > requested, I'm
> > > reporting.
> > > > > > > >
> > > > > > > >
> > > > > > > > I've
> > attached debug
> > > output for
> > > > the
> > > > > regular and the
> > > > > > pmbus
> > > > > > > version. Let
> > > > > > > > me know if
> > there's
> > > anything I
> > > > can do to
> > > > > help
> > > > > > further.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > >
> > > > > > > >
> > > > > > > > Scott
> > Silverman | IT
> > > | Simplex
> > > > |
> > > > > 312-360-2444
> > > > > > > > 230 S.
> > LaSalle St.,
> > > Suite
> > > > 4-100,
> > > > > Chicago, IL 60604
> > > > > > > >
> > > > > > >
> > > > > > > >
> > DISCLAIMER: NOTICE
> > > REGARDING
> > > > PRIVACY AND
> > > > > > CONFIDENTIALITY
> > > > > > > >
> > > > > > > > The
> > information
> > > contained in
> > > > and/or
> > > > > accompanying
> > > > > > this
> > > > > > >
> > communication is
> > > > > > > > intended
> > only for
> > > use by the
> > > > > addressee(s) named
> > > > > > herein and
> > > > > > > may contain
> > > > > > > > legally
> > privileged
> > > and/or
> > > > confidential
> > > > > > information. If you
> > > > > > > are not the
> > > > > > > > intended
> > recipient
> > > of this
> > > > e-mail, you
> > > > > are hereby
> > > > > > notified
> > > > > > > that any
> > > > > > > >
> > dissemination,
> > > distribution or
> > > > copying
> > > > > of this
> > > > > > information,
> > > > > > > and any
> > > > > > > >
> > attachments thereto,
> > > is
> > > > strictly
> > > > > prohibited. If
> > > > > > you have
> > > > > > > received
> > this
> > > > > > > > e-mail in
> > error,
> > > please
> > > > immediately
> > > > > notify the
> > > > > > sender and
> > > > > > > permanently
> > > > > > > > delete the
> > original
> > > and any
> > > > copy of any
> > > > > e-mail and
> > > > > > any
> > > > > > > printout
> > > > > > > > thereof.
> > Electronic
> > > > transmissions cannot
> > > > > be
> > > > > > guaranteed to be
> > > > > > > secure or
> > > > > > > >
> > error-free. The
> > > sender
> > > > therefore does
> > > > > not accept
> > > > > > liability
> > > > > > > for any
> > > > > > > > errors or
> > omissions
> > > in the
> > > > contents of
> > > > > this
> > > > > > message which
> > > > > > > arise as a
> > > > > > > > result of
> > e-mail
> > > transmission.
> > > > Simplex
> > > > > Trading,
> > > > > > LLC and its
> > > > > > > affiliates
> > > > > > > > reserves
> > the right
> > > to
> > > > intercept,
> > > > > monitor, and
> > > > > > retain
> > > > > > > electronic
> > > > > > > >
> > communications to
> > > and from its
> > > > system as
> > > > > permitted
> > > > > > by law.
> > > > > > > Simplex
> > > > > > > > Trading,
> > LLC is a
> > > registered
> > > > Broker
> > > > > Dealer with
> > > > > > CBOE and a
> > > > > > > Member of
> > > > > > > > SIPC.
> > > > > > > >
> > > > >
> > > _______________________________________________
> > > > > > > >
> > Freeipmi-devel
> > > mailing list
> > > > > > > >
> > > address@hidden
> > > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > https://lists.gnu.org/mailman/listinfo/freeipmi-devel
> > > > > > > --
> > > > > > > Albert Chu
> > > > > > >
> > address@hidden
> > > > > > > Computer
> > Scientist
> > > > > > > High
> > Performance
> > > Systems
> > > > Division
> > > > > > > Lawrence
> > Livermore
> > > National
> > > > Laboratory
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > DISCLAIMER: NOTICE
> > REGARDING
> > > PRIVACY AND
> > > > > CONFIDENTIALITY
> > > > > > >
> > > > > > > The information
> > contained in
> > > and/or
> > > > accompanying
> > > > > this
> > > > > > communication is
> > > > > > > intended only for
> > use by the
> > > > addressee(s) named
> > > > > herein and
> > > > > > may contain
> > > > > > > legally privileged
> > and/or
> > > confidential
> > > > > information. If you
> > > > > > are not the
> > > > > > > intended recipient
> > of this
> > > e-mail, you
> > > > are hereby
> > > > > notified
> > > > > > that any
> > > > > > > dissemination,
> > distribution or
> > > copying
> > > > of this
> > > > > information,
> > > > > > and any
> > > > > > > attachments thereto,
> > is
> > > strictly
> > > > prohibited. If
> > > > > you have
> > > > > > received this
> > > > > > > e-mail in error,
> > please
> > > immediately
> > > > notify the
> > > > > sender and
> > > > > > permanently
> > > > > > > delete the original
> > and any
> > > copy of any
> > > > e-mail and
> > > > > any
> > > > > > printout
> > > > > > > thereof. Electronic
> > > transmissions cannot
> > > > be
> > > > > guaranteed to be
> > > > > > secure or
> > > > > > > error-free. The
> > sender
> > > therefore does
> > > > not accept
> > > > > liability
> > > > > > for any
> > > > > > > errors or omissions
> > in the
> > > contents of
> > > > this
> > > > > message which
> > > > > > arise as a
> > > > > > > result of e-mail
> > transmission.
> > > Simplex
> > > > Trading,
> > > > > LLC and its
> > > > > > affiliates
> > > > > > > reserves the right
> > to
> > > intercept,
> > > > monitor, and
> > > > > retain
> > > > > > electronic
> > > > > > > communications to
> > and from its
> > > system as
> > > > permitted
> > > > > by law.
> > > > > > Simplex
> > > > > > > Trading, LLC is a
> > registered
> > > Broker
> > > > Dealer with
> > > > > CBOE and a
> > > > > > Member of
> > > > > > > SIPC.
> > > > > > --
> > > > > > Albert Chu
> > > > > > address@hidden
> > > > > > Computer Scientist
> > > > > > High Performance
> > Systems
> > > Division
> > > > > > Lawrence Livermore
> > National
> > > Laboratory
> > > > > >
> > > > > >
> > > > > >
> > > > > > DISCLAIMER: NOTICE REGARDING
> > PRIVACY AND
> > > > CONFIDENTIALITY
> > > > > >
> > > > > > The information contained in
> > and/or
> > > accompanying
> > > > this
> > > > > communication is
> > > > > > intended only for use by the
> > > addressee(s) named
> > > > herein and
> > > > > may contain
> > > > > > legally privileged and/or
> > confidential
> > > > information. If you
> > > > > are not the
> > > > > > intended recipient of this
> > e-mail, you
> > > are hereby
> > > > notified
> > > > > that any
> > > > > > dissemination, distribution or
> > copying
> > > of this
> > > > information,
> > > > > and any
> > > > > > attachments thereto, is
> > strictly
> > > prohibited. If
> > > > you have
> > > > > received this
> > > > > > e-mail in error, please
> > immediately
> > > notify the
> > > > sender and
> > > > > permanently
> > > > > > delete the original and any
> > copy of any
> > > e-mail and
> > > > any
> > > > > printout
> > > > > > thereof. Electronic
> > transmissions cannot
> > > be
> > > > guaranteed to be
> > > > > secure or
> > > > > > error-free. The sender
> > therefore does
> > > not accept
> > > > liability
> > > > > for any
> > > > > > errors or omissions in the
> > contents of
> > > this
> > > > message which
> > > > > arise as a
> > > > > > result of e-mail transmission.
> > Simplex
> > > Trading,
> > > > LLC and its
> > > > > affiliates
> > > > > > reserves the right to
> > intercept,
> > > monitor, and
> > > > retain
> > > > > electronic
> > > > > > communications to and from its
> > system as
> > > permitted
> > > > by law.
> > > > > Simplex
> > > > > > Trading, LLC is a registered
> > Broker
> > > Dealer with
> > > > CBOE and a
> > > > > Member of
> > > > > > SIPC.
> > > > > --
> > > > > Albert Chu
> > > > > address@hidden
> > > > > Computer Scientist
> > > > > High Performance Systems
> > Division
> > > > > Lawrence Livermore National
> > Laboratory
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > DISCLAIMER: NOTICE REGARDING PRIVACY AND
> > > CONFIDENTIALITY
> > > > >
> > > > > The information contained in and/or
> > accompanying
> > > this
> > > > communication is
> > > > > intended only for use by the
> > addressee(s) named
> > > herein and
> > > > may contain
> > > > > legally privileged and/or confidential
> > > information. If you
> > > > are not the
> > > > > intended recipient of this e-mail, you
> > are hereby
> > > notified
> > > > that any
> > > > > dissemination, distribution or copying
> > of this
> > > information,
> > > > and any
> > > > > attachments thereto, is strictly
> > prohibited. If
> > > you have
> > > > received this
> > > > > e-mail in error, please immediately
> > notify the
> > > sender and
> > > > permanently
> > > > > delete the original and any copy of any
> > e-mail and
> > > any
> > > > printout
> > > > > thereof. Electronic transmissions cannot
> > be
> > > guaranteed to be
> > > > secure or
> > > > > error-free. The sender therefore does
> > not accept
> > > liability
> > > > for any
> > > > > errors or omissions in the contents of
> > this
> > > message which
> > > > arise as a
> > > > > result of e-mail transmission. Simplex
> > Trading,
> > > LLC and its
> > > > affiliates
> > > > > reserves the right to intercept,
> > monitor, and
> > > retain
> > > > electronic
> > > > > communications to and from its system as
> > permitted
> > > by law.
> > > > Simplex
> > > > > Trading, LLC is a registered Broker
> > Dealer with
> > > CBOE and a
> > > > Member of
> > > > > SIPC.
> > > > --
> > > > Albert Chu
> > > > address@hidden
> > > > Computer Scientist
> > > > High Performance Systems Division
> > > > Lawrence Livermore National Laboratory
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > DISCLAIMER: NOTICE REGARDING PRIVACY AND
> > CONFIDENTIALITY
> > > >
> > > > The information contained in and/or accompanying
> > this
> > > communication is
> > > > intended only for use by the addressee(s) named
> > herein and
> > > may contain
> > > > legally privileged and/or confidential
> > information. If you
> > > are not the
> > > > intended recipient of this e-mail, you are hereby
> > notified
> > > that any
> > > > dissemination, distribution or copying of this
> > information,
> > > and any
> > > > attachments thereto, is strictly prohibited. If
> > you have
> > > received this
> > > > e-mail in error, please immediately notify the
> > sender and
> > > permanently
> > > > delete the original and any copy of any e-mail and
> > any
> > > printout
> > > > thereof. Electronic transmissions cannot be
> > guaranteed to be
> > > secure or
> > > > error-free. The sender therefore does not accept
> > liability
> > > for any
> > > > errors or omissions in the contents of this
> > message which
> > > arise as a
> > > > result of e-mail transmission. Simplex Trading,
> > LLC and its
> > > affiliates
> > > > reserves the right to intercept, monitor, and
> > retain
> > > electronic
> > > > communications to and from its system as permitted
> > by law.
> > > Simplex
> > > > Trading, LLC is a registered Broker Dealer with
> > CBOE and a
> > > Member of
> > > > SIPC.
> > > --
> > > Albert Chu
> > > address@hidden
> > > Computer Scientist
> > > High Performance Systems Division
> > > Lawrence Livermore National Laboratory
> > >
> > >
> > >
> > >
> > >
> > >
> > > DISCLAIMER: NOTICE REGARDING PRIVACY AND CONFIDENTIALITY
> > >
> > > The information contained in and/or accompanying this
> > communication is
> > > intended only for use by the addressee(s) named herein and
> > may contain
> > > legally privileged and/or confidential information. If you
> > are not the
> > > intended recipient of this e-mail, you are hereby notified
> > that any
> > > dissemination, distribution or copying of this information,
> > and any
> > > attachments thereto, is strictly prohibited. If you have
> > received this
> > > e-mail in error, please immediately notify the sender and
> > permanently
> > > delete the original and any copy of any e-mail and any
> > printout
> > > thereof. Electronic transmissions cannot be guaranteed to be
> > secure or
> > > error-free. The sender therefore does not accept liability
> > for any
> > > errors or omissions in the contents of this message which
> > arise as a
> > > result of e-mail transmission. Simplex Trading, LLC and its
> > affiliates
> > > reserves the right to intercept, monitor, and retain
> > electronic
> > > communications to and from its system as permitted by law.
> > Simplex
> > > Trading, LLC is a registered Broker Dealer with CBOE and a
> > Member of
> > > SIPC.
> > --
> > Albert Chu
> > address@hidden
> > Computer Scientist
> > High Performance Systems Division
> > Lawrence Livermore National Laboratory
> >
> >
> >
> >
> >
> >
> > DISCLAIMER: NOTICE REGARDING PRIVACY AND CONFIDENTIALITY
> >
> > The information contained in and/or accompanying this communication is
> > intended only for use by the addressee(s) named herein and may contain
> > legally privileged and/or confidential information. If you are not the
> > intended recipient of this e-mail, you are hereby notified that any
> > dissemination, distribution or copying of this information, and any
> > attachments thereto, is strictly prohibited. If you have received this
> > e-mail in error, please immediately notify the sender and permanently
> > delete the original and any copy of any e-mail and any printout
> > thereof. Electronic transmissions cannot be guaranteed to be secure or
> > error-free. The sender therefore does not accept liability for any
> > errors or omissions in the contents of this message which arise as a
> > result of e-mail transmission. Simplex Trading, LLC and its affiliates
> > reserves the right to intercept, monitor, and retain electronic
> > communications to and from its system as permitted by law. Simplex
> > Trading, LLC is a registered Broker Dealer with CBOE and a Member of
> > SIPC.
--
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory

From:	Scott Silverman
Subject:	Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status
Date:	Thu, 15 Oct 2015 09:23:25 -0500