Re: ipmi-oem Supermicro get-power-supply-status issue

[Al Chu]

Hi Andrew,

Thanks for the report.  Since this is a OEM specific command, there is
a good chance this just isn't supported on your motherboard.  There is
no way to know what Supermicro may have meant with the 0x83 error code.

Al

On Thu, 2020-08-20 at 18:28 -0400, Andrew Orme wrote:
> admin@server:~# ipmi-oem --debug Supermicro get-power-supply-status 1
> =====================================================
> Master Write Read Request
> =====================================================
> KCS Header:
> ------------
> [               0h] = lun[ 2b]
> [               6h] = net_fn[ 6b]
> IPMI Command Data:
> ------------------
> [              52h] = cmd[ 8b]
> [  BYTE ARRAY ... ] = raw_data[ 4B]
> [ 07h 70h 01h 0Ch ]
> =====================================================
> Master Write Read Response
> =====================================================
> KCS Header:
> ------------
> [               0h] = lun[ 2b]
> [               7h] = net_fn[ 6b]
> IPMI Command Data:
> ------------------
> [              52h] = cmd[ 8b]
> [  BYTE ARRAY ... ] = raw_data[ 1B]
> [ 83h ]
> Supermicro:get-power-supply-status failed: No error message found for
> command 52h, network function 06h, and completion code 83h.  Please
> report to <freeipmi-devel@gnu.org>
> 
> admin@server:~# dmidecode -t 39 | grep 'Name'
> Name: To Be Filled By O.E.M.
> Name: To Be Filled By O.E.M.
> 
> admin@server:~# dmidecode -t 39
> # dmidecode 2.12
> SMBIOS 2.8 present.
> 
> Handle 0x0018, DMI type 39, 22 bytes
> System Power Supply
> Power Unit Group: 1
> Location: PSU1
> Name: To Be Filled By O.E.M.
> Manufacturer: To Be Filled By O.E.M.
> Serial Number: To Be Filled By O.E.M.
> Asset Tag: To Be Filled By O.E.M.
> Model Part Number: To Be Filled By O.E.M.
> Revision: To Be Filled By O.E.M.
> Max Power Capacity: Unknown
> Status: Not Present
> Type: Switching
> Input Voltage Range Switching: Auto-switch
> Plugged: Yes
> Hot Replaceable: No
> 
> Handle 0x0019, DMI type 39, 22 bytes
> System Power Supply
> Power Unit Group: 2
> Location: PSU2
> Name: To Be Filled By O.E.M.
> Manufacturer: To Be Filled By O.E.M.
> Serial Number: To Be Filled By O.E.M.
> Asset Tag: To Be Filled By O.E.M.
> Model Part Number: To Be Filled By O.E.M.
> Revision: To Be Filled By O.E.M.
> Max Power Capacity: Unknown
> Status: Not Present
> Type: Switching
> Input Voltage Range Switching: Auto-switch
> Plugged: Yes
> Hot Replaceable: No