freeipmi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ipmi-oem Supermicro get-power-supply-status issue


From: Andrew Orme
Subject: Re: ipmi-oem Supermicro get-power-supply-status issue
Date: Tue, 1 Sep 2020 11:59:18 -0400

I'm not seeing a correlation with BMC firmware, IPMI versions (all are 2.0), boards, or BIOS versions either. Will chalk this up to a manufacturing issue, but please send any other suggestions my way.
Thanks for the help so far!

Andrew


On Thu, Aug 27, 2020 at 4:24 PM Al Chu <chu11@llnl.gov> wrote:
On Thu, 2020-08-27 at 16:18 -0400, Andrew Orme wrote:
> BIOS versions are up to date. Referring to the BMC firmware?

Yeah, BMC firmware.  You can see version via bmc-info command.

Al

>
> On Thu, Aug 27, 2020 at 4:00 PM Andy Cress <andycress@gmail.com>
> wrote:
> > Quite so.  SuperMicro is slow to give firmware fixes, but having
> > the latest available firmware helps.
> >
> > On Thu, Aug 27, 2020 at 2:08 PM Al Chu <chu11@llnl.gov> wrote:
> > > On Thu, 2020-08-27 at 14:04 -0400, Andrew Orme wrote:
> > >
> > >
> > > > Indeed. Seems to run fine on our other systems running the same
> > > exact
> > >
> > >
> > > > hardware. Agreed that it is specific to Supermicro and is
> > > perhaps a
> > >
> > >
> > > > manufacturing issue somewhere.
> > >
> > >
> > >
> > >
> > >
> > > You may want to double check the firmware version, that's
> > > sometimes an
> > >
> > >
> > > issue.
> > >
> > >
> > >
> > >
> > >
> > > Al
> > >
> > >
> > >
> > >
> > >
> > > > On Wed, Aug 26, 2020 at 1:07 PM Al Chu <chu11@llnl.gov> wrote:
> > >
> > >
> > > > > Hi Andrew,
> > >
> > >
> > > > >
> > >
> > >
> > > > > Thanks for the report.  Since this is a OEM specific command,
> > > there
> > >
> > >
> > > > > is
> > >
> > >
> > > > > a good chance this just isn't supported on your motherboard.
> > > There
> > >
> > >
> > > > > is
> > >
> > >
> > > > > no way to know what Supermicro may have meant with the 0x83
> > > error
> > >
> > >
> > > > > code.
> > >
> > >
> > > > >
> > >
> > >
> > > > > Al
> > >
> > >
> > > > >
> > >
> > >
> > > > > On Thu, 2020-08-20 at 18:28 -0400, Andrew Orme wrote:
> > >
> > >
> > > > > > admin@server:~# ipmi-oem --debug Supermicro get-power-
> > > supply-
> > >
> > >
> > > > > status 1
> > >
> > >
> > > > > > =====================================================
> > >
> > >
> > > > > > Master Write Read Request
> > >
> > >
> > > > > > =====================================================
> > >
> > >
> > > > > > KCS Header:
> > >
> > >
> > > > > > ------------
> > >
> > >
> > > > > > [               0h] = lun[ 2b]
> > >
> > >
> > > > > > [               6h] = net_fn[ 6b]
> > >
> > >
> > > > > > IPMI Command Data:
> > >
> > >
> > > > > > ------------------
> > >
> > >
> > > > > > [              52h] = cmd[ 8b]
> > >
> > >
> > > > > > [  BYTE ARRAY ... ] = raw_data[ 4B]
> > >
> > >
> > > > > > [ 07h 70h 01h 0Ch ]
> > >
> > >
> > > > > > =====================================================
> > >
> > >
> > > > > > Master Write Read Response
> > >
> > >
> > > > > > =====================================================
> > >
> > >
> > > > > > KCS Header:
> > >
> > >
> > > > > > ------------
> > >
> > >
> > > > > > [               0h] = lun[ 2b]
> > >
> > >
> > > > > > [               7h] = net_fn[ 6b]
> > >
> > >
> > > > > > IPMI Command Data:
> > >
> > >
> > > > > > ------------------
> > >
> > >
> > > > > > [              52h] = cmd[ 8b]
> > >
> > >
> > > > > > [  BYTE ARRAY ... ] = raw_data[ 1B]
> > >
> > >
> > > > > > [ 83h ]
> > >
> > >
> > > > > > Supermicro:get-power-supply-status failed: No error message
> > > found
> > >
> > >
> > > > > for
> > >
> > >
> > > > > > command 52h, network function 06h, and completion code
> > > 83h.
> > >
> > >
> > > > > Please
> > >
> > >
> > > > > > report to <freeipmi-devel@gnu.org>
> > >
> > >
> > > > > >
> > >
> > >
> > > > > > admin@server:~# dmidecode -t 39 | grep 'Name'
> > >
> > >
> > > > > > Name: To Be Filled By O.E.M.
> > >
> > >
> > > > > > Name: To Be Filled By O.E.M.
> > >
> > >
> > > > > >
> > >
> > >
> > > > > > admin@server:~# dmidecode -t 39
> > >
> > >
> > > > > > # dmidecode 2.12
> > >
> > >
> > > > > > SMBIOS 2.8 present.
> > >
> > >
> > > > > >
> > >
> > >
> > > > > > Handle 0x0018, DMI type 39, 22 bytes
> > >
> > >
> > > > > > System Power Supply
> > >
> > >
> > > > > > Power Unit Group: 1
> > >
> > >
> > > > > > Location: PSU1
> > >
> > >
> > > > > > Name: To Be Filled By O.E.M.
> > >
> > >
> > > > > > Manufacturer: To Be Filled By O.E.M.
> > >
> > >
> > > > > > Serial Number: To Be Filled By O.E.M.
> > >
> > >
> > > > > > Asset Tag: To Be Filled By O.E.M.
> > >
> > >
> > > > > > Model Part Number: To Be Filled By O.E.M.
> > >
> > >
> > > > > > Revision: To Be Filled By O.E.M.
> > >
> > >
> > > > > > Max Power Capacity: Unknown
> > >
> > >
> > > > > > Status: Not Present
> > >
> > >
> > > > > > Type: Switching
> > >
> > >
> > > > > > Input Voltage Range Switching: Auto-switch
> > >
> > >
> > > > > > Plugged: Yes
> > >
> > >
> > > > > > Hot Replaceable: No
> > >
> > >
> > > > > >
> > >
> > >
> > > > > > Handle 0x0019, DMI type 39, 22 bytes
> > >
> > >
> > > > > > System Power Supply
> > >
> > >
> > > > > > Power Unit Group: 2
> > >
> > >
> > > > > > Location: PSU2
> > >
> > >
> > > > > > Name: To Be Filled By O.E.M.
> > >
> > >
> > > > > > Manufacturer: To Be Filled By O.E.M.
> > >
> > >
> > > > > > Serial Number: To Be Filled By O.E.M.
> > >
> > >
> > > > > > Asset Tag: To Be Filled By O.E.M.
> > >
> > >
> > > > > > Model Part Number: To Be Filled By O.E.M.
> > >
> > >
> > > > > > Revision: To Be Filled By O.E.M.
> > >
> > >
> > > > > > Max Power Capacity: Unknown
> > >
> > >
> > > > > > Status: Not Present
> > >
> > >
> > > > > > Type: Switching
> > >
> > >
> > > > > > Input Voltage Range Switching: Auto-switch
> > >
> > >
> > > > > > Plugged: Yes
> > >
> > >
> > > > > > Hot Replaceable: No
> > >
> > >
> > > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >


reply via email to

[Prev in Thread] Current Thread [Next in Thread]