[Freeipmi-users] S2881 / S2882 firmware for GNU FreeIPMI

[Anand Babu]

Sorry, my previous posts's MIME section got filtered by GNU Mailman.
Reposting..

,----[ Karl Hanzel <address@hidden> ]
| At a glance, these logs do not appear very interesting to me (at
| least).  Attached you will find the output of 'sel' from one of our
| auto-booting hosts.
`----
It looks like your system has thermal issues. Please run 'ipmi-sensors'
at peak load and see look at the processor temperature. You can send
the output to me or Luan Ha to check if they are optimal.

Please use this current CVS snapshot. This will decode the sensor
values in a more human readable form.
ftp://ftp.zresearch.com/pub/freeipmi/qa-release/freeipmi-0.2.0-cvs051205.tar.gz

Previously you had IPMI LAN driver authentication problem on Tyan
S2881 motherboard. To fix it, use the firmware from Z RESEARCH's 
website. 

GNU FreeIPMI S2881/Opteron Firmware How-To:
ftp://ftp.zresearch.com/pub/amd64-ipmi/FreeIPMI-HowTo-Tyan-S288x.txt
Firmware:
ftp://ftp.zresearch.com/pub/amd64-ipmi/S2881

-- 
Anand Babu 
GPG Key ID: 0x62E15A31
Blog [http://ab.freeshell.org]              
The GNU Operating System [http://www.gnu.org]