Re: [Freeipmi-users] ipmi-sensors with Intel SE7210

[Al Chu]

Actually, one other thing, what options are you passing to ipmi-sensors?
Based on the debug output, you may be passing something funky that ipmi-
sensors is getting confused about.

Al

On Mon, 2006-07-24 at 15:23 -0700, Al Chu wrote:
> Hey Alexey,
> 
> I think doing --prefix=/usr should be enough.  I don't think an rpm is
> necessary.
> 
> > Ok, I will reconfigure and recompile ipmi tomorrow with debug.
> 
> Cool, that should help.  Thanks.
> 
> Al
> 
> > 
> > 
> On Tue, 2006-07-25 at 02:16 +0400, Alexey V Paramonov wrote:
> > Al Chu wrote:
> > 
> > >Hi Alexey,
> > >
> > >Did you just do a 'make install' or did you actually build an rpm from
> > >the CVS stuff?  
> > >
> > >  
> > >
> > I used 'make install', and used /usr as a prefix.
> > Should I try to build rpm package?
> > 
> > >Unfortunately, some of the other developers haven't converted ipmi-
> > >sensors into C yet, so the scheme files have to be installed in the
> > >right locations for everything to work.
> > >
> > >For me, I usually have to do the following to make it work:
> > >
> > >./configure --prefix=/usr
> > >
> > >and add --libdir=/usr/lib64 for x86_64 machines.
> > >
> > >Either way, could you also add --enable-debug and --enable-trace to get
> > >us more debug info?
> > >  
> > >
> > Ok, I will reconfigure and recompile ipmi tomorrow with debug.
> > 
> > >Al
> > >
> > >On Tue, 2006-07-25 at 01:37 +0400, Alexey V Paramonov wrote:
> > >  
> > >
> > >>Hi all.
> > >>Just installed freeipmi from CVS, bmc-info seems to work fine (see 
> > >>output below), but ipmi-sensors says "Cat ate the fish", please help.
> > >>====================================================================
> > >>localhost ~ # ipmi-sensors
> > >>
> > >> >>--:>  >>--:>  >>--:> >>--:>
> > >>~ ~   Cat ate the fish!!  ~ ~
> > >> >>--:>  >>--:>  >>--:> >>--:>
> > >>Fish Exception Handler:
> > >>tag        : unbound-variable
> > >>throw args : (#f Unbound variable: ~S (sensors-argp) #f)
> > >>data       : [/usr/sbin/ipmi-sensors]
> > >>No backtrace available.
> > >>====================================================================
> > >>
> > >>bmc-info output:
> > >>
> > >>localhost ~ # bmc-info
> > >>Device ID:         20
> > >>Device Revision:   1
> > >>                   [SDR Support]
> > >>Firmware Revision: 2.64
> > >>                   [Device Available (normal operation)]
> > >>IPMI Version:      1.5
> > >>Additional Device Support:
> > >>                   [Sensor Device]
> > >>                   [SDR Repository Device]
> > >>                   [SEL Device]
> > >>                   [FRU Inventory Device]
> > >>                   [IPMB Event Receiver]
> > >>                   [Chassis Device]
> > >>Manufacturer ID:   322h
> > >>Product ID:        4311h
> > >>Aux Firmware Revision Info: 0h
> > >>Channel Information:
> > >>       Channel No: 1
> > >>      Medium Type: 802.3 LAN
> > >>    Protocol Type: IPMB-1.0
> > >>       Channel No: 2
> > >>      Medium Type: System Interface (KCS, SMIC, or BT)
> > >>    Protocol Type: IPMB-1.0
> > >>localhost ~ #
> > >>
> > >>
> > >>_______________________________________________
> > >>Freeipmi-users mailing list
> > >>address@hidden
> > >>http://lists.gnu.org/mailman/listinfo/freeipmi-users
> > >>    
> > >>
> > 
-- 
Albert Chu
address@hidden
925-422-5311
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory