freeipmi-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Freeipmi-users] Freeipmi 0.4.3 Problem reading Intel mBMC on SE7320


From: Al Chu
Subject: Re: [Freeipmi-users] Freeipmi 0.4.3 Problem reading Intel mBMC on SE7320SP2
Date: Tue, 28 Aug 2007 09:09:20 -0700

Hi Ulrich,

I've personally never used/developed on the SSIF driver.  I've CCed a
few folks that might have a better idea on those details.

Have you tried the KCS driver?

Al

On Sat, 2007-08-25 at 07:43 +0200, Schäfer Raumgestaltung wrote:
> Big trouble in little China....
> 
> Board: Intel SE7320Sp2
>            mBMC PC87431M
> 
> Distro: Opensuse 10.2 (Kernel 2.6.18)
>            Arch: x86_64
> 
> 
> Done so far:
> 
> built Freeipmi 0.4.3 RPM from Sources (thanks to Opensuse Buildservice) 
> 
> Trying to read Sensor-Values like....
> 
> >ipmi-sensors -D ssif --driver-device /dev/i2c-0  --driver-address 0x42
> 
> Fetching SDR repository Information ...done
> FAILED: Retrieval of SDR record 0x0ord ID 0)
> 
> SDR Cache creation failed: internal_error
> ..... or somtimes (until flushing Cache with -f)
> SDR Cache creation failed: ipmi_communication_error
> 
> 
> any hints what's going wrong ??
> 
> 
> attached: some "Diagnostic" 
> 
> >lsmod |grep i2c
> 
> i2c_dev                28168  0
> i2c_i801               25364  0
> i2c_core               41472  2 i2c_dev,i2c_i801
> 
> =======================================================================================================
> 
> >i2cdetect -l 0
> 
> i2c-0   smbus           SMBus I801 adapter at 0400              Non-I2C SMBus 
> adapter
> 
> =======================================================================================================
> >ipmi-locate 
> 
> 
> Probing KCS device using DMIDECODE... FAILED
> 
> Probing SMIC device using DMIDECODE... FAILED
> 
> Probing BT device using DMIDECODE... FAILED
> 
> Probing SSIF device using DMIDECODE... done
> IPMI Version: 1.5
> IPMI locate driver: DMIDECODE
> IPMI interface: SSIF
> BMC driver device: /dev/i2c-0
> BMC SMBUS slave address: 42
> Register space: 1
> 
> Probing KCS device using SMBIOS... FAILED
> 
> Probing SMIC device using SMBIOS... FAILED
> 
> Probing BT device using SMBIOS... FAILED
> 
> Probing SSIF device using SMBIOS... done
> IPMI Version: 1.5
> IPMI locate driver: SMBIOS
> IPMI interface: SSIF
> BMC driver device: /dev/i2c-0
> BMC SMBUS slave address: 84
> Register space: 1
> 
> Probing KCS device using ACPI... FAILED
> 
> Probing SMIC device using ACPI... FAILED
> 
> Probing BT device using ACPI... FAILED
> 
> Probing SSIF device using ACPI... FAILED
> 
> Probing KCS device using PCI... FAILED
> 
> Probing SMIC device using PCI... FAILED
> 
> Probing BT device using PCI... FAILED
> 
> Probing SSIF device using PCI... FAILED
> 
> KCS device default values:
> IPMI Version: 1.5
> IPMI locate driver: DEFAULT
> IPMI interface: KCS
> BMC driver device:
> BMC I/O base address: CA2
> Register space: 1
> 
> SMIC device default values:
> IPMI Version: 1.5
> IPMI locate driver: DEFAULT
> IPMI interface: SMIC
> BMC driver device:
> BMC I/O base address: CA9
> Register space: 1
> 
> BT device default values:
> 
> SSIF device default values:
> IPMI Version: 1.5
> IPMI locate driver: DEFAULT
> IPMI interface: SSIF
> BMC driver device: /dev/i2c-0
> BMC SMBUS slave address: 42
> Register space: 1
> 
> =======================================================================================================
> 
> >ipmi-raw -D ssif --driver-device /dev/i2c-0 0 6 1
> 
> rcvd: 01 00 20 81 02 40 51 9F 22 03 00 11 43
> 
> =======================================================================================================
>  
> 
> 
> 
> >bmc-info  -D ssif --driver-device /dev/i2c-0  --driver-address 0x42
> 
> Device ID:         20
> Device Revision:   1
>                    [SDR Support]
> Firmware Revision: 2.64
>                    [Device Available (normal operation)]
> IPMI Version:      1.5
> Additional Device Support:
>                    [Sensor Device]
>                    [SDR Repository Device]
>                    [SEL Device]
>  [FRU Inventory Device]
>                    [IPMB Event Receiver]
>                    [Chassis Device]
> Manufacturer ID:   322h
> Product ID:        4311h
> Aux Firmware Revision Info: 0h
> Channel Information:
>        Channel No: 1
>       Medium Type: 802.3 LAN
>     Protocol Type: IPMB-1.0
>        Channel No: 2
>       Medium Type: System Interface (KCS, SMIC, or BT)
>     Protocol Type: IPMI-SMBus
> =======================================================================================================
> 
> 
>  
> 
> 
> 
>                    
> '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
> Ulrich Schäfer
> ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
> _______________________________________________
> Freeipmi-users mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/freeipmi-users
> 
-- 
Albert Chu
address@hidden
925-422-5311
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory




reply via email to

[Prev in Thread] Current Thread [Next in Thread]