Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E

[Chris Morgan]

On Jan 22, 2008 2:47 PM, Chris Morgan <address@hidden> wrote:
> On Jan 22, 2008 2:24 PM, Al Chu <address@hidden> wrote:
> > Hey Chris,
> >
> > It looks like you can communicate w/ the BMC now, which is good.  So we
> > need to figure out why the the SSIF driver is not working by default.
> > That's bug #1.  I have a few ideas about it, hopefully I can deal with
> > that later.
> >
> > > address@hidden:~# ipmimonitoring --no-probing -D SSIF
> > > --driver-address=0x42  --driver-device=/dev/i2c-0
> > > --register-spacing=1
> > > ipmi_monitoring_sensor_readings_by_record_id: internal error
> >
> > This a more major concern.  Could you run w/ --debug and see if there is
> > any extra info it outputs.
> >
>
> Hello again Al.
>
> address@hidden:~# ipmimonitoring --no-probing -D SSIF
> --driver-address=0x42 --driver-device=/dev/i2c-0 --register-spacing=1
> --debug
> ipmi-udm.c: 627: ipmi_open_inband: errnum (9): expression failed
> (ipmi_monitoring_ipmi_communication.c, _inband_init, 176): ipmi_cmd:
> device not found
> ipmi-udm.c: 808: ipmi_close_device: errnum (15): expression failed
>
> ipmi_monitoring_sensor_readings_by_record_id: internal error
>
> Chris
>

Please ignore this. I forgot to load i2c-dev, i2c-core and i2c-i810.

Here is more valid output:

address@hidden:~# ipmimonitoring --no-probing -D SSIF
--driver-address=0x42 --driver-device=/dev/i2c-0 --register-spacing=1
--debug
================================================================
[ VALUE               TAG NAME:LENGTH                          ]
================================================================
[              20h] = cmd[ 8b]
================================================================
================================================================
[ VALUE               TAG NAME:LENGTH                          ]
================================================================
[               0h] = cmd[ 8b]
[               0h] = comp_code[ 8b]
[               0h] = sdr_version_major[ 4b]
[               0h] = sdr_version_minor[ 4b]
[               0h] = record_count[16b]
[               0h] = free_space[16b]
[               0h] = most_recent_addition_timestamp[32b]
[               0h] = most_recent_erase_timestamp[32b]
[               0h] = get_sdr_repository_allocation_info_command_supported[ 1b]
[               0h] = reserve_sdr_repository_command_supported[ 1b]
[               0h] = partial_add_sdr_command_supported[ 1b]
[               0h] = delete_sdr_command_supported[ 1b]
[               0h] = reserved[ 1b]
[               0h] =
modal_non_modal_sdr_repository_update_operation_supported[ 2b]
[               0h] = overflow_flag[ 1b]
================================================================
(ipmi_monitoring_sdr_cache.c, _ipmi_monitoring_sdr_cache_retrieve,
493): ipmi_sdr_cache_create: invalid parmaeters
ipmi_monitoring_sensor_readings_by_record_id: internal error

Chris