[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Freeipmi-users] freeipmi to X4150/X4450

From: Al Chu
Subject: Re: [Freeipmi-users] freeipmi to X4150/X4450
Date: Tue, 27 May 2008 09:40:09 -0700

Hey Ihara,

I found a bug on the way that was unrelated to this, but actually the
MAC addresses are already output correctly.  But they only are output in
verbose mode.  It seems you always ran w/ verbose mode the last time we
dealt with this :-)

I'm going to go through the code and see if I should maybe make some
changes in how verbosity is interpreted.  When I originally wrote it, I
think I only output "required fields" by default.  Then extra stuff is
output in verbose mode (the MAC address fields you're seeing are in the
"oem defined extra" section of the fru format).


On Tue, 2008-05-27 at 22:44 +0900, Shuichi Ihara wrote:
> Al,
> >> I just tried the ipmitool to elom. An attached is output of ipmitool 
> >> with "fru".
> >> As you mentioned, these information are from PSU, but it seems the ipmi 
> >> feature doesn't
> >> work correctly and couldn't get information from these device.
> > 
> > I'm thinking this is a problem on the firmware.  I'll punt that issue
> > off to you guys at Sun :-)
> picked up :) Thanks for your investigation.
> I will try to ask internal right person about this issue.
> > 
> >> Also, I attached ipmi-fru output (without --debug), but I can't find MAC 
> >> address information
> >> from this output.
> > 
> > I guess a corner case in the parsing.  Could you send me the --debug
> > output?
> Please see attached file.
> Thanks,
> -Ihara
Albert Chu
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory

reply via email to

[Prev in Thread] Current Thread [Next in Thread]