[Freeipmi-users] Intel S3210SHLC IPMI 2.0 shows only a few sensors

[address@hidden Internetservices]

Hello,

first sorry for my bad english! ;-)

I have big problems to get my new Serverboard and FreeIPMI working.

I tried OpemIPMI and other tools with same result. Now i'm very confused
because i don't know if it is my fault or some incompatibility reasons.

I used the latest version (0.6.5) to get this informations:

lspci 

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller
(rev 02)

ipmi-locate

Probing KCS device using DMIDECODE... done
IPMI Version: 2.0
IPMI locate driver: DMIDECODE
IPMI interface: KCS
BMC driver device: 
BMC I/O base address: 0xCA2
Register spacing: 1

Probing SMIC device using DMIDECODE... FAILED
Probing BT device using DMIDECODE... FAILED
Probing SSIF device using DMIDECODE... FAILED
Probing KCS device using SMBIOS... done
IPMI Version: 2.0
IPMI locate driver: SMBIOS
IPMI interface: KCS
BMC driver device: 
BMC I/O base address: 0xCA2
Register spacing: 1

Probing SMIC device using SMBIOS... FAILED
Probing BT device using SMBIOS... FAILED
Probing SSIF device using SMBIOS... FAILED
Probing KCS device using ACPI... FAILED
Probing SMIC device using ACPI... FAILED
Probing BT device using ACPI... FAILED
Probing SSIF device using ACPI... FAILED
Probing KCS device using PCI... FAILED
Probing SMIC device using PCI... FAILED
Probing BT device using PCI... FAILED
Probing SSIF device using PCI... FAILED
KCS device default values: 
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: KCS
BMC driver device: 
BMC I/O base address: 0xCA2
Register spacing: 1

SMIC device default values: 
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: SMIC
BMC driver device: 
BMC I/O base address: 0xCA9
Register spacing: 1


bmc-info 

Device ID:         21
Device Revision:   1
Firmware Revision: 0.30
                   [Device Available (normal operation)]
IPMI Version:      2.0
Additional Device Support:
                   [Sensor Device]
                   [SDR Repository Device]
                   [SEL Device]
                   [FRU Inventory Device]
                   [IPMB Event Receiver]
                   [IPMB Event Generator]
                   [Chassis Device]
Manufacturer ID:   157h
Product ID:        3Ah
Aux Firmware Revision Info: Boot Code v01. 9, PIA v00.33
Channel Information:
       Channel No: 0
      Medium Type: IPMB (I2C)
    Protocol Type: IPMB-1.0
       Channel No: 1
      Medium Type: 802.3 LAN
    Protocol Type: IPMB-1.0
       Channel No: 7
      Medium Type: System Interface (KCS, SMIC, or BT)
    Protocol Type: KCS


BT device default values: 
SSIF device default values: 
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: SSIF
BMC driver device: /dev/i2c-0
BMC SMBUS slave address: 0x42
Register spacing: 1

ipmi-sensors

1: BB +1.8V SM (Voltage): 1.78 V (1.60/2.02): [OK]
2: BB +3.3V (Voltage): 3.37 V (2.88/3.73): [OK]
3: BB +3.3V STBY (Voltage): 3.22 V (2.88/3.73): [OK]
4: BB +5.0V (Voltage): 5.06 V (4.36/5.66): [OK]
5: Processor Vcc (Voltage): 1.13 V (0.77/1.51): [OK]
6: BB Ambient Temp (Temperature): 33.00 C (5.00/66.00): [OK]
7: CPU Fan (Fan): 3978.00 RPM (NA/NA): [OK]
8: System Fan 3 (Fan): 6858.00 RPM (NA/NA): [OK]
9: P1 Therm Margin (Temperature): -51.00 C (NA/NA): [OK]
10: Power Unit (Power Unit): [OK]
11: IPMI Watchdog (Watchdog 2): [OK]
12: Processor Status (Processor): [OK]

Thank you very much!
Tim