RE: [Freeipmi-users] Ipmi-sensors threshold values

[Ashish Ray]

Thanks Al. It seems that MB sensor flag is invalid. A different system (SR2500) 
is showing the
correct value.

13: Fan 1 (Fan): 6450.00 RPM (1720.00/NA): [OK]
14: Fan 2 (Fan): 7009.00 RPM (1720.00/NA): [OK]
15: Fan 3 (Fan): 6364.00 RPM (1720.00/NA): [OK]
16: Fan 4 (Fan): 6837.00 RPM (1720.00/NA): [OK]
17: Fan 5 (Fan): 9176.00 RPM (2046.00/NA): [OK]
18: Fan 6 (Fan): 8060.00 RPM (2046.00/NA): [OK]
19: PS1 AC Current (Current): 2.60 A (NA/11.90): [OK]


Thanks
aray



 

> -----Original Message-----
> From: Al Chu [mailto:address@hidden 
> Sent: Thursday, October 08, 2009 5:37 PM
> To: Ashish Ray
> Cc: address@hidden
> Subject: Re: [Freeipmi-users] Ipmi-sensors threshold values
> 
> Hi Ashish,
> 
> On Thu, 2009-10-08 at 17:12 -0400, Ashish Ray wrote:
> > 14: Fan 2 (Fan): 9030.00 RPM (1720.00/NA): [At or Below (<=) Lower 
> > Critical Thre shold]
> 
> (Note: 0.3.1 is quite old.  I believe my statements are valid for the
> 0.3.1 release, but it's a release from quite some time ago, 
> so maybe the code changed significantly.)
> 
> If I had to bet there, may be a bug on your motherboard.  The 
> "At or below lower critical threshold" comes directly from 
> the sensor.  So if I had to guess:
> 
> A) the 1720 rpm threshold listed by the sensor is invalid.
> 
> B) the sensor indicating the "At or below lower critical 
> threshold" flag is invalid.
> 
> Any chance you could update your copy FreeIPMI and run w/ 
> --debug?  I can give you additional information if you can.

since it is integrated with other software we can't upgrated to newer ver.



> 
> Al
> 
> --
> Albert Chu
> address@hidden
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
>