freeipmi-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Freeipmi-users] No SDR values from ipmi-sensors on Fujitsu RX300 an


From: Olaf Morgenstern
Subject: Re: [Freeipmi-users] No SDR values from ipmi-sensors on Fujitsu RX300 and RX300S2
Date: Thu, 15 Sep 2011 13:22:19 +0200

Hi Al,

thanks for your quick response.

And no, ipmi-sensors -f doesn't help.

ipmi-sensors --bridge-sensors returns with error:

address@hidden ~]# ipmi-sensors -h 18.18.18.2 -l user --bridge-sensors
ipmi_sensor_read: internal IPMI error

You will find the output of ipmi-sensors with the --debug switch as attachment, 
once with --bridge-sensors and once without this switch. Both outputs are from 
a clean SDR cache (ipmi-sensors -f issued before). The IPMI LAN interface 
queried is a Fujitsu RX300.

I will provide the output from ipmi-sensors v0.5.1 (for comparing) with a 
separate post.

Thanks for your effort!

Regards,
Olaf

-------- Original-Nachricht --------
> Datum: Wed, 14 Sep 2011 07:47:16 -0700
> Von: Al Chu <address@hidden>
> An: "address@hidden" <address@hidden>
> CC: "address@hidden" <address@hidden>
> Betreff: Re: [Freeipmi-users] No SDR values from ipmi-sensors on Fujitsu      
> RX300 and RX300S2

> Hi,
> 
> First, could run the following
> 
> ipmi-sensors -f
> 
> to flush out the old SDR cache and try ipmi-sensors again (it'll reload
> the SDR cache).  I'm wondering if there was an SDR format change between
> versions that is not being caught.
> 
> Although I've personally never seen it before, you may want to try the
> --bridge-sensors option.  It's possible all your motherboard's sensors
> aren't owned by the BMC.
> 
> If that doesn't work, could you send me the ipmi-sensors output w/
> --debug.
> 
> Thanks,
> Al
> 
> On Tue, 2011-09-13 at 23:57 -0700, address@hidden wrote:
> > I want to monitor my Fujitsu servers with the check-ipmi-sensor plugin
> (v2) for Nagios. It requires the ipmimonitoring tool from freeipmi.
> > 
> > I tried the freeipmi version 0.5.1 shipped with CentOS 5.6. OK, it is
> really old, but the ipmi-sensors works fine. But the command "ipmimonitoring"
> doesn't work - it returns a SDR cache error:
> > 
> > address@hidden ~]# ipmimonitoring -h 60.18.18.1 -l user
> > ipmi_monitoring_sensor_readings_by_record_id: internal error
> > 
> > If I use the --debug switch, the additional info is:
> > 
> > (ipmi_monitoring_sdr_cache.c, _ipmi_monitoring_sdr_cache_retrieve, 537):
> ipmi_sdr_cache_complete: incomplete number of records written
> > 
> > OK, I assume there will be no support for this old version, neither by
> the freeipmi developers or Redhat/CentOS.
> > 
> > Next I tried the freeipmi version 0.7.16 shipped with CentOS 6. But
> ipmi-sensors or ipmimonitoring doesn't show any SDR values, it returns only 
> NA.
> > 
> > That's why I have compiled the newest freeipmi 1.0.6 on CentOS 5.6.
> > But, surprise, ipmi-sensors doesn't show any SDR values, it returns only
> N/A:
> > 
> > 
> > (0)address@hidden:
> /home/a18/omo/rpmbuild/BUILD/freeipmi-1.0.6/ipmi-sensors/src $su -c 
> "./ipmi-sensors -h 18.18.18.2 -l user"
> > Password:
> > ID   | Name             | Type                    | Reading    | Units |
> Event
> > 0    | Systemboard      | Temperature             | N/A        | C     |
> N/A
> > 64   | CPU0             | Temperature             | N/A        | C     |
> N/A
> > 128  | CPU1             | Temperature             | N/A        | C     |
> N/A
> > 192  | Ambient          | Temperature             | N/A        | C     |
> N/A
> > 256  | PSU              | Temperature             | N/A        | C     |
> N/A
> > 320  | PSU FanControl   | OEM Reserved            | N/A        | C     |
> N/A
> > 384  | PSU Power        | Current                 | N/A        | W     |
> N/A
> > 448  | Main +12V        | Voltage                 | N/A        | V     |
> N/A
> > 512  | Main -12V        | Voltage                 | N/A        | V     |
> N/A
> > 576  | Main +5V         | Voltage                 | N/A        | V     |
> N/A
> > 640  | Main 3.3V        | Voltage                 | N/A        | V     |
> N/A
> > 704  | Battery +3V      | Voltage                 | N/A        | V     |
> N/A
> > 768  | Main 2.5V        | Voltage                 | N/A        | V     |
> N/A
> > 832  | Stdby +3.3V      | Voltage                 | N/A        | V     |
> N/A
> > 896  | SSTL_Term        | Voltage                 | N/A        | V     |
> N/A
> > 960  | Main +1.5V       | Voltage                 | N/A        | V     |
> N/A
> > 1024 | VGA +2.5V        | Voltage                 | N/A        | V     |
> N/A
> > 1088 | Lan +1.2V        | Voltage                 | N/A        | V     |
> N/A
> > 1152 | Lan +2.5V        | Voltage                 | N/A        | V     |
> N/A
> > 1216 | SCSI +1.8V       | Voltage                 | N/A        | V     |
> N/A
> > 1280 | BMC +2.5V        | Voltage                 | N/A        | V     |
> N/A
> > 1344 | FAN SYS0         | Fan                     | N/A        | RPM   |
> N/A
> > 1408 | FAN SYS1         | Fan                     | N/A        | RPM   |
> N/A
> > 1472 | FAN SYS2         | Fan                     | N/A        | RPM   |
> N/A
> > 1536 | FAN PS0          | Fan                     | N/A        | RPM   |
> N/A
> > 1600 | FAN SYS3         | Fan                     | N/A        | RPM   |
> N/A
> > 1664 | FAN SYS4         | Fan                     | N/A        | RPM   |
> N/A
> > 1728 | FAN SYS5         | Fan                     | N/A        | RPM   |
> N/A
> > 1792 | FAN PS1          | Fan                     | N/A        | RPM   |
> N/A
> > 1856 | FAN CPU0         | Fan                     | N/A        | RPM   |
> N/A
> > 1920 | FAN CPU1         | Fan                     | N/A        | RPM   |
> N/A
> > 1984 | SEL Level        | Monitor ASIC/IC         | N/A        | %     |
> N/A
> > 2048 | CPU0 PRSNT       | Entity Presence         | N/A        | N/A   |
> N/A
> > 2096 | CPU0             | Processor               | N/A        | N/A   |
> N/A
> > 2144 | CPU1 PRSNT       | Entity Presence         | N/A        | N/A   |
> N/A
> > 2192 | CPU1             | Processor               | N/A        | N/A   |
> N/A
> > 2240 | PS0 PRSNT        | Entity Presence         | N/A        | N/A   |
> N/A
> > 2288 | PS1 PRSNT        | Entity Presence         | N/A        | N/A   |
> N/A
> > 2336 | FAN SYS0 PRSNT   | Entity Presence         | N/A        | N/A   |
> N/A
> > 2384 | FAN SYS1 PRSNT   | Entity Presence         | N/A        | N/A   |
> N/A
> > 2432 | FAN SYS2 PRSNT   | Entity Presence         | N/A        | N/A   |
> N/A
> > 2480 | FAN PS0 PRSNT    | Entity Presence         | N/A        | N/A   |
> N/A
> > 2528 | FAN SYS3 PRSNT   | Entity Presence         | N/A        | N/A   |
> N/A
> > 2576 | FAN SYS4 PRSNT   | Entity Presence         | N/A        | N/A   |
> N/A
> > 2624 | FAN SYS5 PRSNT   | Entity Presence         | N/A        | N/A   |
> N/A
> > 2672 | FAN PS1 PRSNT    | Entity Presence         | N/A        | N/A   |
> N/A
> > 2720 | FAN SYS0 STAT    | OEM Reserved            | N/A        | N/A   |
> N/A
> > 2768 | FAN SYS1 STAT    | OEM Reserved            | N/A        | N/A   |
> N/A
> > 2816 | FAN SYS2 STAT    | OEM Reserved            | N/A        | N/A   |
> N/A
> > 2864 | FAN PS0 STAT     | OEM Reserved            | N/A        | N/A   |
> N/A
> > 2912 | FAN SYS3 STAT    | OEM Reserved            | N/A        | N/A   |
> N/A
> > 2960 | FAN SYS4 STAT    | OEM Reserved            | N/A        | N/A   |
> N/A
> > 3008 | FAN SYS5 STAT    | OEM Reserved            | N/A        | N/A   |
> N/A
> > 3056 | FAN PS1 STAT     | OEM Reserved            | N/A        | N/A   |
> N/A
> > 3104 | PS0 STAT         | OEM Reserved            | N/A        | N/A   |
> N/A
> > 3152 | PS1 STAT         | OEM Reserved            | N/A        | N/A   |
> N/A
> > 3200 | FAN CPU0 STAT    | OEM Reserved            | N/A        | N/A   |
> N/A
> > 3248 | FAN CPU1 STAT    | OEM Reserved            | N/A        | N/A   |
> N/A
> > 3296 | ACPI Power State | System ACPI Power State | N/A        | N/A   |
> N/A
> > 3344 | Watchdog         | Watchdog 2              | N/A        | N/A   |
> N/A
> > 3392 | PSU RED PRSNT    | Entity Presence         | N/A        | N/A   |
> N/A
> > 3440 | PSU RED STAT     | OEM Reserved            | N/A        | N/A   |
> N/A
> > 3488 | PSU status       | Power Unit              | N/A        | N/A   |
> N/A
> > 3536 | BMC request      | OEM Reserved            | N/A        | N/A   |
> N/A
> > 4736 | System Mgmt SW   | OEM Reserved            | N/A        | N/A   |
> N/A
> > 4784 | System BIOS      | OEM Reserved            | N/A        | N/A   |
> N/A
> > 4832 | BMC              | OEM Reserved            | N/A        | N/A   |
> N/A
> > (0)address@hidden:
> /home/a18/omo/rpmbuild/BUILD/freeipmi-1.0.6/ipmi-sensors/src $su -c 
> "./ipmi-sensors -h 18.18.18.2 -l user -s 0 -v"
> > Password:
> > Record ID: 0
> > ID String: Systemboard
> > Sensor Type: Temperature (1h)
> > Sensor Number: 1
> > IPMB Slave Address: 12h
> > Sensor Owner ID: 24h
> > Sensor Owner LUN: 0h
> > Channel Number: 0h
> > Entity ID: system board (7)
> > Entity Instance: 0
> > Entity Instance Type: Physical Entity
> > Event/Reading Type Code: 1h
> > Sensor Min. Reading: -128.000000 C
> > Sensor Max. Reading: 127.000000 C
> > Normal Min.: N/A
> > Normal Max.: N/A
> > Nominal Reading: N/A
> > Sensor Reading: N/A
> > Sensor Event: N/A
> > 
> > (0)address@hidden:
> /home/a18/omo/rpmbuild/BUILD/freeipmi-1.0.6/ipmi-sensors/src $
> > 
> > 
> > 
> > Which information should I provide to track the bug?
> > 
> > Kind regards,
> > omo
> > 
> > _______________________________________________
> > Freeipmi-users mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/freeipmi-users
> -- 
> Albert Chu
> address@hidden
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
> 

reply via email to

[Prev in Thread] Current Thread [Next in Thread]