[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] Duplicate Sensors on a Dell PowerEdge R310
From: |
Albert Chu |
Subject: |
Re: [Freeipmi-users] Duplicate Sensors on a Dell PowerEdge R310 |
Date: |
Mon, 13 Aug 2012 11:50:06 -0700 |
On Mon, 2012-08-13 at 11:30 -0700, Christian Ruppert wrote:
> Hi Albert,
>
> On 08/13/12 at 08:02AM -0700, Al Chu wrote:
> > > As you can see, sensor 36 and 48 are duplicated. IMHO that shouldn't
> > > happen. I guess it's something Dell specific.
> >
> > A number of Dell motherboards have this behavior. Dell lists multiple
> > sensors by the same device name and expects the user software to
> > "construct" a more usable sensor name using other information on the
> > system. In FreeIPMI, I implement this as an option called
> > --entity-sensor-names. It'd be interesting to see if this works for
> > you.
> >
>
> With that option it's named "System Board iDRAC6 Ent Pres" for both sensors.
>
> > > Is there anything I could do to help to get that fixed? Like
> > > offering additional
> > > information.
> >
> > It'd be interesting to see the debug output (--debug). Please limit it
> > to the record ids 36 & 48 by specifying -r 36,48.
> >
>
> I attached the requested details.
It looks like Dell just elected to name the sensors the same. Not sure
why Dell would do that, but definitely not a bug on the FreeIPMI side.
I think you'd have to ping Dell to ask them why they do this.
Al
> > Al
> >
> >
> > > Hi guys,
> > >
> > > there are duplicates on the mentioned system:
> > >
> > > # /usr/sbin/ipmi-sensors -h 10.0.0.178 --config-file
> > > /etc/icinga/ipmi.cfg --quiet-cache --sdr-cache-recreate
> > > --interpret-oem-data --output-sensor-state --ignore-not-available-sensors
> > > ID | Name | Type | State |
> > > Reading | Units | Event
> > > 7 | Ambient Temp | Temperature | Nominal |
> > > 25.00 | C | 'OK'
> > > 9 | CMOS Battery | Battery | Nominal |
> > > N/A | N/A | 'OK'
> > > 11 | VCORE PG | Voltage | Nominal |
> > > N/A | N/A | 'State Deasserted'
> > > 12 | CPU1 0.75 VTT PG | Voltage | Nominal |
> > > N/A | N/A | 'State Deasserted'
> > > 13 | 1.8V AUX PG | Voltage | Nominal |
> > > N/A | N/A | 'State Deasserted'
> > > 14 | PS PG | Voltage | Nominal |
> > > N/A | N/A | 'State Deasserted'
> > > 15 | Riser2 5V PG | Voltage | Nominal |
> > > N/A | N/A | 'State Deasserted'
> > > 16 | Riser1 5V PG | Voltage | Nominal |
> > > N/A | N/A | 'State Deasserted'
> > > 17 | CPU1 MEM FAIL | Voltage | Nominal |
> > > N/A | N/A | 'State Deasserted'
> > > 18 | CPU1 VTT FAIL | Voltage | Nominal |
> > > N/A | N/A | 'State Deasserted'
> > > 19 | 1.05V AUX PG | Voltage | Nominal |
> > > N/A | N/A | 'State Deasserted'
> > > 20 | 1.8V PLL CPU1 PG | Voltage | Nominal |
> > > N/A | N/A | 'State Deasserted'
> > > 21 | 1.2V LOM FAIL | Voltage | Nominal |
> > > N/A | N/A | 'State Deasserted'
> > > 22 | 1.2V AUX FAIL | Voltage | Nominal |
> > > N/A | N/A | 'State Deasserted'
> > > 23 | 1.05V PG | Voltage | Nominal |
> > > N/A | N/A | 'State Deasserted'
> > > 24 | FAN MOD 1A RPM | Fan | Nominal |
> > > 5880.00 | RPM | 'OK'
> > > 25 | FAN MOD 1B RPM | Fan | Nominal |
> > > 4800.00 | RPM | 'OK'
> > > 26 | FAN MOD 2A RPM | Fan | Nominal |
> > > 5880.00 | RPM | 'OK'
> > > 27 | FAN MOD 2B RPM | Fan | Nominal |
> > > 4800.00 | RPM | 'OK'
> > > 28 | FAN MOD 3A RPM | Fan | Nominal |
> > > 4560.00 | RPM | 'OK'
> > > 29 | FAN MOD 3B RPM | Fan | Nominal |
> > > 3360.00 | RPM | 'OK'
> > > 30 | FAN MOD 4A RPM | Fan | Nominal |
> > > 5040.00 | RPM | 'OK'
> > > 31 | FAN MOD 4B RPM | Fan | Nominal |
> > > 3480.00 | RPM | 'OK'
> > > 32 | FAN MOD 5A RPM | Fan | Nominal |
> > > 5040.00 | RPM | 'OK'
> > > 33 | FAN MOD 5B RPM | Fan | Nominal |
> > > 3480.00 | RPM | 'OK'
> > > 34 | Presence | Entity Presence | Nominal |
> > > N/A | N/A | 'Entity Present'
> > > 35 | Heatsink Pres | Entity Presence | Nominal |
> > > N/A | N/A | 'Entity Present'
> > > 36 | iDRAC6 Ent Pres | Entity Presence | Critical |
> > > N/A | N/A | 'Entity Absent'
> > > 37 | Presence | Entity Presence | Nominal |
> > > N/A | N/A | 'Entity Present'
> > > 38 | Presence | Entity Presence | Nominal |
> > > N/A | N/A | 'Entity Present'
> > > 39 | Presence | Entity Presence | Nominal |
> > > N/A | N/A | 'Entity Present'
> > > 40 | USB Cable Pres | Entity Presence | Nominal |
> > > N/A | N/A | 'Entity Present'
> > > 41 | Riser2 Pres | Entity Presence | Nominal |
> > > N/A | N/A | 'Entity Present'
> > > 42 | Riser1 Pres | Entity Presence | Nominal |
> > > N/A | N/A | 'Entity Present'
> > > 44 | Status | Processor | Nominal |
> > > N/A | N/A | 'Processor Presence detected'
> > > 45 | Status | Power Supply | Nominal |
> > > N/A | N/A | 'Presence detected'
> > > 46 | Status | Power Supply | Nominal |
> > > N/A | N/A | 'Presence detected'
> > > 47 | Status | Cable/Interconnect | Nominal |
> > > N/A | N/A | 'Cable/Interconnect is connected'
> > > 48 | iDRAC6 Ent Pres | Entity Presence | Critical |
> > > N/A | N/A | 'Entity Absent'
> > > 49 | OS Watchdog | Watchdog 2 | Nominal |
> > > N/A | N/A | 'OK'
> > > 51 | Intrusion | Physical Security | Nominal |
> > > N/A | N/A | 'OK'
> > > 52 | PS Redundancy | Power Supply | Nominal |
> > > N/A | N/A | 'Fully Redundant'
> > > 53 | Fan Redundancy | Fan | Nominal |
> > > N/A | N/A | 'Fully Redundant'
> > > 56 | Drive | Drive Slot | Nominal |
> > > N/A | N/A | 'Drive Presence'
> > > 57 | Cable SAS A | Cable/Interconnect | Nominal |
> > > N/A | N/A | 'Cable/Interconnect is connected'
> > > 58 | Current 1 | Current | Nominal |
> > > 0.48 | A | 'OK'
> > > 59 | Current 2 | Current | Nominal |
> > > 0.48 | A | 'OK'
> > > 60 | Voltage 1 | Voltage | Nominal |
> > > 122.00 | V | 'OK'
> > > 61 | Voltage 2 | Voltage | Nominal |
> > > 120.00 | V | 'OK'
> > > 62 | System Level | Current | Nominal |
> > > 140.00 | W | 'OK'
> > > 63 | Power Optimized | OEM Reserved | Nominal |
> > > N/A | N/A | 'Good'
> > > 65 | DKM Status | OEM Reserved | N/A |
> > > N/A | N/A | 'OEM Event = 0000h'
> > >
> > > As you can see, sensor 36 and 48 are duplicated. IMHO that
> > > shouldn't happen. I
> > > guess it's something Dell specific.
> > > Is there anything I could do to help to get that fixed? Like
> > > offering additional
> > > information.
> > >
> > > --
> > > Regards,
> > > Christian Ruppert
> > > Role: Gentoo Linux developer, Bugzilla administrator and
> > > Infrastructure member
> > > Fingerprint: EEB1 C341 7C84 B274 6C59 F243 5EAB 0C62 B427 ABC8
> > --
> > Albert Chu
> > address@hidden
> > Computer Scientist
> > High Performance Systems Division
> > Lawrence Livermore National Laboratory
> >
> >
> > _______________________________________________
> > Freeipmi-users mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/freeipmi-users
>
--
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory