freeipmi-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Freeipmi-users] ipmitools with IPMI BMC KCS


From: Albert Chu
Subject: Re: [Freeipmi-users] ipmitools with IPMI BMC KCS
Date: Mon, 10 Sep 2012 09:47:37 -0700

Can you try running ipmi-locate?  Lets see if ipmi-locate can even find
a IPMI card on your system.

> Maybe i need some driver actived in the kernel ?

Usually you don't need to, but installing/running the Linux IPMI kernel
driver is worth trying.  If you're on Linux w/ most distros
"/etc/init.d/ipmi start" should start it up.

Al

On Sun, 2012-09-09 at 00:26 -0700, Fabio Cecamore wrote:
> Hi Al,
> thanks for your reply, the workaround this time dont work :(
> 
> address@hidden:/home/fabio# ipmi-sensors -W assumeio
> could not find inband device
> address@hidden:/home/fabio#
> 
> [146841.244016] ipmi-sensors:6367 map pfn expected mapping type 
> uncached-minus for d7fa0000-d7fa1000, got write-back
> [146841.245030] ipmi-sensors:6367 map pfn expected mapping type 
> uncached-minus for d7fa0000-d7fa1000, got write-back
> [146841.245052] ipmi-sensors:6367 map pfn expected mapping type 
> uncached-minus for d7fa0000-d7fa1000, got write-back
> 
> Maybe i need some driver actived in the kernel ?
> 
> -----Messaggio originale----- 
> From: Al Chu
> Sent: Sunday, September 09, 2012 6:12 AM
> To: Fabio Cecamore
> Cc: address@hidden
> Subject: Re: [Freeipmi-users] ipmitools with IPMI BMC KCS
> 
> Hi Fabio,
> 
> Some HP motherboards have a bug which does not advertise properly it's
> KCS device information.  Here's the workaround option from the manpage
> 
> ----
> assumeio - This workaround flag will assume inband interfaces
> communicate with  system  I/O  rather  than  being  memory-mapped.
> This  will  work around systems that report invalid base addresses.
> Those hitting this issue may see "device not supported" or "could not
> find inband device" errors.  Issue observed on HP ProLiant DL145 G1.
> ----
> 
> It'd be worth a shot trying it out (via "-W assumeio").
> 
> Al
> 
> On Sat, 2012-09-08 at 16:14 -0700, Fabio Cecamore wrote:
> > Hello at all,
> > i’m trying to use freeipmi tools in my debian installation (on a 
> > microserver
> > proliant hp) but there is no way to work..
> >
> > address@hidden:~# bmc-info
> > could not find inband device
> > address@hidden:~# ipmi-sensors
> > could not find inband device
> > address@hidden:~#
> >
> > in dmesg:
> > [117664.327176] bmc-info:5860 map pfn expected mapping type uncached-minus
> > for d7fa0000-d7fa1000, got write-back
> > [117664.327197] bmc-info:5860 map pfn expected mapping type uncached-minus
> > for d7fa0000-d7fa1000, got write-back
> > [117664.328223] bmc-info:5860 map pfn expected mapping type uncached-minus
> > for d7fa0000-d7fa1000, got write-back
> > [117664.329762] bmc-info:5860 map pfn expected mapping type uncached-minus
> > for d7fa0000-d7fa1000, got write-back
> >
> > I'm "sure" i've a ipmisensors becouse this is the output of lm_sensors:
> >
> > Driver `ipmisensors':
> >   * ISA bus
> >     Chip `IPMI BMC KCS' (confidence: 8)
> >
> > But lm_sensors have not the driver too and not work..
> >
> > What can i try ?
> > Thank you
> > Bye
> > Fabio C.
> >
> >
> > _______________________________________________
> > Freeipmi-users mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/freeipmi-users
-- 
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory





reply via email to

[Prev in Thread] Current Thread [Next in Thread]