[Freeipmi-users] Supermicro X9SCL-F ipmi-dcmi Bad completion code

[Ihsan Junaidi Ibrahim]

Hi folks,

I'm trying to obtain my system power utilization via the command ipmi-dcmi
but I kept getting bad completion code error.

nsv02-kul # ipmi-dcmi -W supermicro20
--get-enhanced-system-power-statistics
ipmi_cmd_dcmi_get_dcmi_capability_info_enhanced_system_power_statistics_attributes:
bad completion code

nsv02-kul # ipmi-dcmi -W supermicro20 --get-system-power-statistics
ipmi_cmd_dcmi_get_power_reading: bad completion code

Omitting the -W workaround flag did not seem to make a difference.

Other reading seems OK.

nsv02-kul # ipmi-sensors
ID   | Name          | Type              | Reading    | Units | Event
4    | System Temp   | Temperature       | 24.00      | C     | 'OK'
71   | CPU Temp      | OEM Reserved      | N/A        | N/A   | 'OEM Event
= 0000h'
138  | FAN 1         | Fan               | 9045.00    | RPM   | 'OK'
205  | FAN 2         | Fan               | 9990.00    | RPM   | 'OK'
272  | FAN 3         | Fan               | 10125.00   | RPM   | 'OK'
339  | FAN 4         | Fan               | N/A        | RPM   | N/A
406  | FAN A         | Fan               | 9045.00    | RPM   | 'OK'
473  | Vcore         | Voltage           | 0.99       | V     | 'OK'
540  | 3.3VCC        | Voltage           | 3.39       | V     | 'OK'
607  | 12V           | Voltage           | 12.24      | V     | 'OK'
674  | VDIMM         | Voltage           | 1.54       | V     | 'OK'
741  | 5VCC          | Voltage           | 5.12       | V     | 'OK'
808  | -12V          | Voltage           | -12.83     | V     | 'OK'
875  | VBAT          | Voltage           | 3.14       | V     | 'OK'
942  | VSB           | Voltage           | 3.38       | V     | 'OK'
1009 | AVCC          | Voltage           | 3.41       | V     | 'OK'
1076 | Chassis Intru | Physical Security | N/A        | N/A   | 'OK'
1143 | PS Status     | Power Supply      | N/A        | N/A   | 'Presence
detected'

-- 
Thank you for your time,
Ihsan Junaidi Ibrahim