freeipmi-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Freeipmi-users] ipmi-sensors Super Micro X9SPU-F-O (Single)


From: Albert Chu
Subject: Re: [Freeipmi-users] ipmi-sensors Super Micro X9SPU-F-O (Single)
Date: Thu, 21 Feb 2013 11:08:53 -0800

Hi Holger,

I've added it into the current stable branch.  Can you try it can make
sure it works for you.

svn co svn://svn.savannah.gnu.org/freeipmi/branches/Release-1_2_0_branch
./autogen.sh
./configure
make
ipmi-sensors/ipmi-sensors --interpret-oem-data

and of course try whatever options you'd like.

Thanks,
Al

On Thu, 2013-02-21 at 16:45 +0100, Holger Bürger wrote:
> Hallo,
> 
> as mentioned here:
> 
> http://www.thomas-krenn.com/de/wiki/FreeIPMI_kann_OEM_Sensor_nicht_auslesen_-_CPU_Temp_liefert_nur_N/A#Problem:_OEM_Sensor_wird_nicht_richtig_ausgelesen
> 
> 
> I request a processing of the cpu temp sensors for the following mainboard:
> 
> Supermicro X9SPU-F-O (Single)
> 
> The output of the following commands follows:
> 
> ipmi-sensors -V
> ipmi-sensors --flush-cache
> ipmi-sensors --interpret-oem-data --output-sensor-state
> ipmi-sensors --interpret-oem-data --output-sensor-state
> --ignore-not-available-sensors
> ipmi-sensors --interpret-oem-data --output-sensor-state -v
> --record-ids=[IDs der betroffenen Records]
> 
> ###################################################
> 
> /usr/local/sbin/ipmi-sensors -V
> ipmi-sensors - 1.2.4
> Copyright (C) 2003-2012 FreeIPMI Core Team
> This program is free software; you may redistribute it under the terms of
> the GNU General Public License.  This program has absolutely no warranty.
> 
> 
> ###################################################
> 
> /usr/local/sbin/bmc-info -h xxx.xxx.xxx.xxx -u xxx -p xxx -l admin
> 
> Device ID             : 32
> Device Revision       : 1
> Device SDRs           : unsupported
> Firmware Revision     : 1.65
> Device Available      : yes (normal operation)
> IPMI Version          : 2.0
> Sensor Device         : supported
> SDR Repository Device : supported
> SEL Device            : supported
> FRU Inventory Device  : supported
> IPMB Event Receiver   : supported
> IPMB Event Generator  : supported
> Bridge                : unsupported
> Chassis Device        : supported
> Manufacturer ID       : Super Micro Computer Inc. (10876)
> Product ID            : 1603
> 
> GUID : 00000000-0000-0000-0000-000000000000
> 
> ipmi_cmd_get_system_info_parameters_system_firmware_version_first_set:
> privilege level insufficient
> 
> ###################################################
> 
> 
> address@hidden ~]# ipmi-sensors --flush-cache
> Flushing cache: /root/.freeipmi/sdr-cache/sdr-cache-xxxx.localhost
> 
> ###################################################
> 
> address@hidden ~]# /usr/local/sbin/ipmi-sensors -h xxx.xxx.xxx.xxx -u xxx -p
> xxx -l admin --interpret-oem-data --output-sensor-state
> ID   | Name            | Type              | State    | Reading    |
> Units | Event
> 4    | System Temp     | Temperature       | Nominal  | 17.00      | C
>    | 'OK'
> 71   | Peripheral Temp | Temperature       | Nominal  | 26.00      | C
>    | 'OK'
> 138  | CPU Temp        | OEM Reserved      | N/A      | N/A        | N/A
>   | 'OEM Event = 0000h'
> 205  | FAN 1           | Fan               | Nominal  | 4725.00    | RPM
>   | 'OK'
> 272  | FAN 2           | Fan               | Nominal  | 4725.00    | RPM
>   | 'OK'
> 339  | FAN 3           | Fan               | Nominal  | 4725.00    | RPM
>   | 'OK'
> 406  | FAN 4           | Fan               | Nominal  | 4425.00    | RPM
>   | 'OK'
> 473  | FAN 5           | Fan               | Nominal  | 4950.00    | RPM
>   | 'OK'
> 540  | Vcore           | Voltage           | Nominal  | 0.98       | V
>    | 'OK'
> 607  | 3.3VCC          | Voltage           | Nominal  | 3.31       | V
>    | 'OK'
> 674  | 12V             | Voltage           | Nominal  | 12.19      | V
>    | 'OK'
> 741  | VDIMM           | Voltage           | Nominal  | 1.51       | V
>    | 'OK'
> 808  | 5VCC            | Voltage           | Nominal  | 5.12       | V
>    | 'OK'
> 875  | -12V            | Voltage           | Nominal  | -12.09     | V
>    | 'OK'
> 942  | VBAT            | Voltage           | Nominal  | 3.14       | V
>    | 'OK'
> 1009 | VSB             | Voltage           | Nominal  | 3.39       | V
>    | 'OK'
> 1076 | AVCC            | Voltage           | Nominal  | 3.33       | V
>    | 'OK'
> 1143 | Chassis Intru   | Physical Security | Nominal  | N/A        | N/A
>   | 'OK'
> 1210 | PS Status       | Power Supply      | Nominal  | N/A        | N/A
>   | 'Presence detected'
> address@hidden ~]#
> 
> 
> ###################################################
> 
>  /usr/local/sbin/ipmi-sensors -h xxx.xxx.xxx.xxx -u xxx -p xxx -l admin
> --interpret-oem-data --output-sensor-state --ignore-not-available-sensors
> ID   | Name            | Type              | State    | Reading    |
> Units | Event
> 4    | System Temp     | Temperature       | Nominal  | 17.00      | C
>    | 'OK'
> 71   | Peripheral Temp | Temperature       | Nominal  | 26.00      | C
>    | 'OK'
> 138  | CPU Temp        | OEM Reserved      | N/A      | N/A        | N/A
>   | 'OEM Event = 0000h'
> 205  | FAN 1           | Fan               | Nominal  | 4800.00    | RPM
>   | 'OK'
> 272  | FAN 2           | Fan               | Nominal  | 4725.00    | RPM
>   | 'OK'
> 339  | FAN 3           | Fan               | Nominal  | 4800.00    | RPM
>   | 'OK'
> 406  | FAN 4           | Fan               | Nominal  | 4425.00    | RPM
>   | 'OK'
> 473  | FAN 5           | Fan               | Nominal  | 4800.00    | RPM
>   | 'OK'
> 540  | Vcore           | Voltage           | Nominal  | 0.98       | V
>    | 'OK'
> 607  | 3.3VCC          | Voltage           | Nominal  | 3.31       | V
>    | 'OK'
> 674  | 12V             | Voltage           | Nominal  | 12.19      | V
>    | 'OK'
> 741  | VDIMM           | Voltage           | Nominal  | 1.51       | V
>    | 'OK'
> 808  | 5VCC            | Voltage           | Nominal  | 5.12       | V
>    | 'OK'
> 875  | -12V            | Voltage           | Nominal  | -12.09     | V
>    | 'OK'
> 942  | VBAT            | Voltage           | Nominal  | 3.14       | V
>    | 'OK'
> 1009 | VSB             | Voltage           | Nominal  | 3.39       | V
>    | 'OK'
> 1076 | AVCC            | Voltage           | Nominal  | 3.33       | V
>    | 'OK'
> 1143 | Chassis Intru   | Physical Security | Nominal  | N/A        | N/A
>   | 'OK'
> 1210 | PS Status       | Power Supply      | Nominal  | N/A        | N/A
>   | 'Presence detected'
> address@hidden ~]#
> 
> 
> /usr/local/sbin/ipmi-sensors -h xxx.xxx.xxx.xxx -u xxx -p xxx -l admin
> --interpret-oem-data --output-sensor-state -v --record-ids=138
> Record ID: 138
> ID String: CPU Temp
> Sensor Type: OEM Reserved (C0h)
> Sensor Number: 18
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: processor (3)
> Entity Instance: 1
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: 70h
> Sensor State: N/A
> Sensor Event: 'OEM Event = 0000h'
> 
> 
> kind regards
> 
> holger
> 
> _______________________________________________
> Freeipmi-users mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/freeipmi-users
-- 
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory





reply via email to

[Prev in Thread] Current Thread [Next in Thread]