[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] ipmi-sensors missing data on HP Gen7/8 servers
From: |
Albert Chu |
Subject: |
Re: [Freeipmi-users] ipmi-sensors missing data on HP Gen7/8 servers |
Date: |
Thu, 14 Mar 2013 17:34:51 -0700 |
Hi Stephen,
Could you please try the "discretereading" workaround (i.e. -W
discretereading). There's a description of the issue in the manpage
about the issue and it's only been seen on HP systems. I believe HP has
acknowledged the issue, but due to legacy reasons I don't believe they
want to change it.
If that doesn't work, please send the --debug output.
Al
On Thu, 2013-03-14 at 16:55 -0700, Stephen Abbene wrote:
> Hello,
>
>
>
> Today I installed freeipmi 1.2.5 on several HP gen7 and Gen8 servers and
> have noticed that all the systems are missing the RPM from the fans and the
> power meter information. Is there a way I can obtain this information? I
> can provide the output from --debug or any other information you may need.
>
>
>
> Here are some of the specs of one of the systems I am testing, I can provide
> more information if it is required.
>
> . HP Proliant DL160 G8
>
> . CentOS 5.7
>
> . 2x Intel(R) Xeon(R) CPU E5-2680 0 @ 2.70GHz
>
> . 1x Power Supply (detected)
>
> . 8x fans (detected)
>
>
>
> I have included the output of ` ipmi-sensors --entity-sensor-names` and
> `bmc-info` from a HP dl160 Gen8 below.
>
>
>
> # ipmi-sensors --entity-sensor-names
>
> ID | Name | Type | Reading
> | Units | Event
>
> 0 | System Chassis 1 UID Light | OEM Reserved | N/A | N/A |
> 'OEM Event = 0000h'
>
> 1 | System Chassis 2 Health LED | OEM Reserved | N/A | N/A |
> 'OEM Event = 0000h'
>
> 2 | Power Supply 1 Power Supply 1 | Power Supply | N/A | N/A
> | 'Presence detected'
>
> 3 | System Board 1 Fan 1 | Fan | N/A
> | N/A | N/A
>
> 4 | System Board 2 Fan 2 | Fan | N/A
> | N/A | 'transition to Running'
>
> 5 | System Board 3 Fan 3 | Fan | N/A
> | N/A | 'transition to Running'
>
> 6 | System Board 4 Fan 4 | Fan | N/A
> | N/A | 'transition to Running'
>
> 7 | System Board 5 Fan 5 | Fan | N/A
> | N/A | 'transition to Running'
>
> 8 | System Board 6 Fan 6 | Fan | N/A
> | N/A | 'transition to Running'
>
> 9 | System Board 7 Fan 7 | Fan | N/A
> | N/A | 'transition to Running'
>
> 10 | System Board 8 Fan 8 | Fan | N/A
> | N/A | 'transition to Running'
>
> 11 | System Board 9 Fans | Fan | N/A
> | N/A | 'Fully Redundant'
>
> 13 | Air Inlet 01-Inlet Ambient | Temperature | 25.00
> | C | 'OK'
>
> 14 | Processor 1 02-CPU 1 | Temperature | 40.00
> | C | 'OK'
>
> 15 | Processor 2 03-CPU 2 | Temperature | 40.00
> | C | 'OK'
>
> 16 | Memory Device 1 04-P1 DIMM 1-6 | Temperature | 38.00
> | C | 'OK'
>
> 17 | Memory Device 2 05-P1 DIMM 7-12 | Temperature | 39.00
> | C | 'OK'
>
> 18 | Memory Device 3 06-P2 DIMM 1-6 | Temperature | 34.00
> | C | 'OK'
>
> 19 | Memory Device 4 07-P2 DIMM 7-12 | Temperature | 29.00
> | C | 'OK'
>
> 20 | Memory Device 5 08-P1 Mem Zone | Temperature | 38.00
> | C | 'OK'
>
> 21 | Memory Device 6 09-P1 Mem Zone | Temperature | 38.00
> | C | 'OK'
>
> 22 | Memory Device 7 10-P1 Mem Zone | Temperature | 39.00
> | C | 'OK'
>
> 23 | Memory Device 8 11-P1 Mem Zone | Temperature | 42.00
> | C | 'OK'
>
> 24 | Memory Device 9 12-P1 Mem Zone | Temperature | 40.00
> | C | 'OK'
>
> 25 | Memory Device 10 13-P1 Mem Zone | Temperature | 39.00
> | C | 'OK'
>
> 26 | Memory Device 11 14-P2 Mem Zone | Temperature | 36.00
> | C | 'OK'
>
> 27 | Memory Device 12 15-P2 Mem Zone | Temperature | 35.00
> | C | 'OK'
>
> 28 | Memory Device 13 16-P2 Mem Zone | Temperature | 34.00
> | C | 'OK'
>
> 29 | Memory Device 14 17-P2 Mem Zone | Temperature | 33.00
> | C | 'OK'
>
> 30 | Memory Device 15 18-P2 Mem Zone | Temperature | 31.00
> | C | 'OK'
>
> 31 | Memory Device 16 19-P2 Mem Zone | Temperature | 30.00
> | C | 'OK'
>
> 32 | Disk 20-HD Max |
> Temperature | N/A | C | N/A
>
> 33 | System Board 1 21-Chipset | Temperature | 46.00
> | C | 'OK'
>
> 34 | Power Supply 2 22-P/S | Temperature | 32.00
> | C | 'OK'
>
> 35 | Power Unit 1 23-VR P1 | Temperature | 43.00
> | C | 'OK'
>
> 36 | Power Unit 2 24-VR P2 | Temperature | 28.00
> | C | 'OK'
>
> 37 | Power Unit 3 25-VR P1 Zone | Temperature | 45.00
> | C | 'OK'
>
> 38 | Power Unit 4 26-VR P1 Mem | Temperature | 40.00
> | C | 'OK'
>
> 39 | Power Unit 5 27-VR P1 Mem | Temperature | 38.00
> | C | 'OK'
>
> 40 | Power Unit 6 28-VR P2 Mem |
> Temperature | 30.00 | C | 'OK'
>
> 41 | Power Unit 7 29-VR P2 Mem |
> Temperature | 28.00 | C | 'OK'
>
> 42 | Battery 30-Supercap Max |
> Temperature | N/A | C | N/A
>
> 43 | System Management Module 31-iLO Zone | Temperature | 35.00
> | C | 'OK'
>
> 44 | System Board 2 32-LOM |
> Temperature | N/A | C | N/A
>
> 45 | Add-in Card 1 33-PCI 1 | Temperature | N/A
> | C | N/A
>
> 46 | Add-in Card 2 34-PCI 2 | Temperature | N/A
> | C | N/A
>
> 47 | System Internal Expansion Board 1 35-PCI 1 Zone | Temperature | 33.00
> | C | 'OK'
>
> 48 | System Internal Expansion Board 2 36-PCI 2 Zone | Temperature | 33.00
> | C | 'OK'
>
> 49 | Add-in Card 3 37-LOM Card | Temperature | N/A
> | C | N/A
>
> 50 | System Board 3 38-System Board | Temperature | 26.00
> | C | 'OK'
>
> 51 | Back Panel Board 39-Sys Exhaust | Temperature | 40.00
> | C | 'OK'
>
> 52 | System Board 10 Power Meter | Current | N/A
> | N/A | 'Device Enabled'
>
> 53 | System Board 11 Memory | Memory | N/A
> | N/A | 'Presence detected'
>
>
> # bmc-info
>
> Device ID : 19
>
> Device Revision : 1
>
> Device SDRs : unsupported
>
> Firmware Revision : 1.10
>
> Device Available : yes (normal operation)
>
> IPMI Version : 2.0
>
> Sensor Device : supported
>
> SDR Repository Device : supported
>
> SEL Device : supported
>
> FRU Inventory Device : supported
>
> IPMB Event Receiver : unsupported
>
> IPMB Event Generator : unsupported
>
> Bridge : unsupported
>
> Chassis Device : supported
>
> Manufacturer ID : Hewlett-Packard (11)
>
> Product ID : 8192
>
>
>
> Channel Information
>
>
>
> Channel Number : 0
>
> Medium Type : IPMB (I2C)
>
> Protocol Type : IPMB-1.0
>
> Active Session Count : 0
>
> Session Support : session-less
>
> Vendor ID : Intelligent Platform Management Interface forum (7154)
>
>
>
> Channel Number : 2
>
> Medium Type : 802.3 LAN
>
> Protocol Type : IPMB-1.0
>
> Active Session Count : 0
>
> Session Support : multi-session
>
> Vendor ID : Intelligent Platform Management Interface forum (7154)
>
>
>
> Channel Number : 7
>
> Medium Type : OEM
>
> Protocol Type : KCS
>
> Active Session Count : 0
>
> Session Support : session-less
>
> Vendor ID : Intelligent Platform Management Interface forum (7154)
>
> Thanks,
> --Stephen Abbene
>
> _______________________________________________
> Freeipmi-users mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/freeipmi-users
--
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory