Re: [Freeipmi-users] getting "internal IPMI error"

[Albert Chu]

When FreeIPMI is doing it's communication w/ the BMC there's an error
pretty deep down causing grief.  Do you know what inband driver you are
using?

Is it posssible you have the situation described here?

http://www.gnu.org/software/freeipmi/freeipmi-faq.html#Why-am-I-seeing-so-many-_0027internal-IPMI-error_0027-or-_0027driver-busy_0027-messages_003f

If not, we'd have to dig a little deeper.  Any chance you and download
the tar.gz off the website and build with

./configure --enable-debug --enable-trace

which can give us way more info.

Al

On Wed, 2015-03-11 at 09:37 -0700, address@hidden wrote:
> Hi Al,
> 
> Thank you for your help. It is still happening a lot and only on this
> one server, the other identical server does not have this problem. These
> servers are idle right now, they are not being used but will be for
> databases.
> 
> I ran the Nagios command manually and get the error after a few tries. I
> ran the freeipmi command that Nagios is running manually and got the
> error after a few tries. I turned on debug and after a few verbose
> outputs, I get this, its rather terse:
> 
> # sudo /usr/sbin/ipmi-sel --output-event-state --interpret-oem-data
> --entity-sensor-names --debug
> =====================================================
> Get SDR Repository Info Request
> =====================================================
> KCS Header:
> ------------
> [               0h] = lun[ 2b]
> [               Ah] = net_fn[ 6b]
> IPMI Command Data:
> ------------------
> [              20h] = cmd[ 8b]
> ipmi_sdr_cache_open:
> /root/.freeipmi/sdr-cache/sdr-cache-databaseServer8.localhost: internal
> IPMI error
> #
> 
> Do you know what could cause this?
> 
> Thanks,
> Andrew
> 
> 
> > -------- Original Message --------
> > Subject: Re: [Freeipmi-users] getting "internal IPMI error"
> > From: Albert Chu <address@hidden>
> > Date: Tue, March 10, 2015 1:32 pm
> > To: address@hidden
> > Cc: address@hidden
> > 
> > 
> > Hi Andrew,
> > 
> > If it's sporadic, I'm not that concerned, as it could be due to a busy
> > system.
> > 
> > If it happens very frequently, --debug output would be helpful.
> > Although that'll lead to a lot of log output for Nagios.
> > 
> > Al
> > 
> > On Tue, 2015-03-10 at 08:14 -0700, address@hidden wrote:
> > > Hi,
> > > 
> > > I've setup Nagios to monitor IPMI on our 2 new Supermicro servers. The
> > > one is working find, the other sporadically but frequently is returning
> > > some errors. The page at
> > > https://www.gnu.org/software/freeipmi/manpages/man8/ipmi-sel.8.html
> > > suggested emailing here. Please let me know if you can help or if you
> > > need any more information.
> > > 
> > > Thanks,
> > > Andrew
> > > 
> > > 
> > > Errors reported to Nagios:
> > > 
> > > [03-10-2015 03:28:47] SERVICE ALERT: databaseServer8;IPMI
> > > SENSORS;UNKNOWN;SOFT;1;ID
> > > [03-10-2015 08:55:47] SERVICE ALERT: databaseServer8;IPMI
> > > SENSORS;UNKNOWN;HARD;2;ID
> > > Service Unknown[03-10-2015 08:54:47] SERVICE ALERT: databaseServer8;IPMI
> > > SENSORS;UNKNOWN;SOFT;1;ipmi_cmd_get_device_id: bad completion code
> > > [03-10-2015 09:00:47] SERVICE ALERT: databaseServer8;IPMI
> > > SENSORS;OK;HARD;2;IPMI Status: OK
> > > 
> > > 
> > > 
> > > [03-09-2015 21:02:47] SERVICE ALERT: databaseServer8;IPMI
> > > SENSORS;UNKNOWN;SOFT;1;ipmi_sel_parse: internal IPMI error
> > > [03-09-2015 19:11:57] SERVICE ALERT: databaseServer8;IPMI
> > > SENSORS;UNKNOWN;SOFT;1;ipmi_sdr_cache_open:
> > > /root/.freeipmi/sdr-cache/sdr-cache-databaseServer8.localhost: internal
> > > IPMI error
> > > [03-09-2015 19:00:57] SERVICE ALERT: databaseServer8;IPMI
> > > SENSORS;UNKNOWN;SOFT;1;ipmi_sdr_cache_open:
> > > /root/.freeipmi/sdr-cache/sdr-cache-databaseServer8.localhost: internal
> > > IPMI error
> > > [03-09-2015 18:34:47] SERVICE ALERT: databaseServer8;IPMI
> > > SENSORS;UNKNOWN;SOFT;1;ipmi_sensor_read: internal IPMI error
> > > 
> > > 
> > > 
> > > from website above:
> > > 
> > > "internal IPMI error" - An IPMI error has occurred that FreeIPMI does
> > > not know how to handle. Please e-mail <address@hidden> to report
> > > the issue.  
> > > 
> > > 
> > > _______________________________________________
> > > Freeipmi-users mailing list
> > > address@hidden
> > > https://lists.gnu.org/mailman/listinfo/freeipmi-users
> > -- 
> > Albert Chu
> > address@hidden
> > Computer Scientist
> > High Performance Systems Division
> > Lawrence Livermore National Laboratory
> 
> 
-- 
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory