freeipmi-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Freeipmi-users] ipmi-sensors: password verification timeout


From: Yulok Lam
Subject: Re: [Freeipmi-users] ipmi-sensors: password verification timeout
Date: Mon, 23 Jan 2017 16:16:17 -0800

Hi Albert,

  No, it does not.  However, on a different system .23, it works. I have
double check the password on both systems and they are good.   See results
for the .23 and .24 systems.

address@hidden ~]# /usr/sbin/ipmi-sensors -h 192.168.160.24 -u XXXXX -p
XXXXX -l user

/usr/sbin/ipmi-sensors: password verification timeout

address@hidden ~]#

===========================

address@hidden ~]# /usr/sbin/ipmi-sensors -h 192.168.160.23 -u XXXXX -p
XXXXX -l user

ID   | Name            | Type              | Reading    | Units | Event

4    | CPU1 Temp       | Temperature       | 28.00      | C     | 'OK'

71   | CPU2 Temp       | Temperature       | 27.00      | C     | 'OK'

138  | System Temp     | Temperature       | 29.00      | C     | 'OK'

=================================================


   I have one system where I need to use the "-I lanplus" option while the
other, I did not.  Both systems are Supermicro X9DRW-7TPF+ and running the
same ipmitool 2.0/firmware 3.31.

address@hidden ]# ipmitool -H 192.168.160.24 -U xxxxx -P xxxxx power status
Activate Session error: Invalid data field in request
Error: Unable to establish LAN session
Unable to get Chassis Power Status

address@hidden ]# ipmitool -I lan -H 192.168.160.24 -U xxxx -P xxxxx power 
status
Activate Session error: Invalid data field in request
Error: Unable to establish LAN session
Unable to get Chassis Power Status

address@hidden ]# ipmitool -I lanplus -H 192.168.160.24 -U xxxxx -P xxxxx power
status
Chassis Power is on
address@hidden

===============
address@hidden ~]# ipmitool mc info
Device ID                 : 32
Device Revision           : 1
Firmware Revision         : 3.31
IPMI Version              : 2.0
Manufacturer ID           : 10876
Manufacturer Name         : Supermicro
Product ID                : 1824 (0x0720)
Product Name              : Unknown (0x720)
Device Available          : yes
Provides Device SDRs      : no
Additional Device Support :
    Sensor Device
    SDR Repository Device
    SEL Device
    FRU Inventory Device
    IPMB Event Receiver
    IPMB Event Generator
    Chassis Device
address@hidden ~]#

=================

Success "without -I lanplus" on the .23 (different) server.

address@hidden ]# ipmitool -H 192.168.160.23 -U xxxxx -P xxx power status
Chassis Power is on
address@hidden ]#


  I am thinking there must be an option in ipmitool option that I am
forgetting.

-Yulok Lam

On Mon, Jan 23, 2017 at 3:59 PM, Albert Chu <address@hidden> wrote:

> Usually this means that the password you have doesn't work.  When you
> do:
>
> /usr/sbin/ipmi-sensors -h 192.168.160.24 -u xxxxx -p xxxxx -l user
>  --quiet-cache --sdr-cache-recreate --interpret-oem-data
>  --output-sensor-state --ignore-not-available-sensors
>
> On the command line, does it work?  Or even something more basic like:
>
> /usr/sbin/ipmi-sensors -h 192.168.160.24 -u xxxxx -p xxxxx
>
> Al
>
> On Mon, 2017-01-23 at 15:40 -0800, Yulok Lam wrote:
> > Hi all,
> >
> >    I am getting an error "password verification timeout" using
> > check_ipmi_sensor 3.2 a Nagios plugin check on a Supermicro Server
> > X9DRW-7TPF+ system.  I have look through the documentation via
> > http://www.gnu.org/software/freeipmi/manpages/man8/ipmi-
> sensors-config.8.html#lbAO
> > concerning "password verification timeout" but doesn't have a direct
> > solution.  Any help would be greatly appreciated!
> >
> >
> > address@hidden ~]# /usr/lib64/nagios/plugins/check_ipmi_sensor -H
> > 192.168.160.24 -U xxxxx -P xxxxx  -L user -vvv
> > ------------- begin of debug output (-vvv is set): ------------
> >   script was executed with the following parameters:
> >     /usr/lib64/nagios/plugins/check_ipmi_sensor -H 192.168.160.24 -U
> xxxxx
> > -P xxxxx -L user -vvv
> >   check_ipmi_sensor version:
> >     3.2
> >   FreeIPMI version:
> >     ipmi-sensors - 1.2.9
> >   FreeIPMI was executed with the following parameters:
> >     /usr/sbin/ipmi-sensors -h 192.168.160.24 -u xxxxx -p xxxxx -l user
> > --quiet-cache --sdr-cache-recreate --interpret-oem-data
> > --output-sensor-state --ignore-not-available-sensors
> >   FreeIPMI return code: 1
> >   output of FreeIPMI:
> > /usr/sbin/ipmi-sensors: password verification timeout
> >
> >   output of FRU data:
> > --------------------- end of debug output ---------------------
> > /usr/sbin/ipmi-sensors: password verification timeout
> >
> > -> Execution of /usr/sbin/ipmi-sensors failed with return code 1.
> > -> /usr/sbin/ipmi-sensors was executed with the following parameters:
> >    /usr/sbin/ipmi-sensors -h 192.168.160.24 -u xxxxx -p xxxxx -l user
> > --quiet-cache --sdr-cache-recreate --interpret-oem-data
> > --output-sensor-state --ignore-not-available-sensors
> > address@hidden ~]#
> >
> > Thanks,
>
> --
> Albert Chu
> address@hidden
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
>
>
>


-- 
 Yu Lok


reply via email to

[Prev in Thread] Current Thread [Next in Thread]