[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] Get BMC firmware version with freeipmi
From: |
Albert Chu |
Subject: |
Re: [Freeipmi-users] Get BMC firmware version with freeipmi |
Date: |
Thu, 4 Jul 2019 22:22:56 -0500 |
> Am I correct that " Firmware Revision : 1.90" is the FW of the BMC and
Correct
> "IPMI Version : 2.0" means that the BC speaks only 'LAN_2_0'?
It should support LAN or LAN_2_0, since all 2.0 motherboards should be
backwards compatible to 1.5. However, there are some motherboards
that fail to do the backwards compatibility.
Al
On Thu, Jul 4, 2019 at 10:57 AM FRANK Michael
<address@hidden> wrote:
>
> Hello Albert,
>
> Thank you for your reply.
> Am I correct that " Firmware Revision : 1.90" is the FW of the BMC and
> "IPMI Version : 2.0" means that the BC speaks only 'LAN_2_0'?
>
> Device ID : 32
> Device Revision : 0
> Device SDRs : unsupported
> Firmware Revision : 1.90
> Device Available : yes (normal operation)
> IPMI Version : 2.0
> Sensor Device : supported
> SDR Repository Device : supported
> SEL Device : supported
> FRU Inventory Device : supported
> IPMB Event Receiver : supported
> IPMB Event Generator : supported
> Bridge : unsupported
> Chassis Device : supported
> Manufacturer ID : Lenovo Group (19046)
> Product ID : 1087
>
> GUID : cfb6540a-d37e-9b92-e811-74376f4b4774
>
> System Firmware Version :
> System Name : xxxx.
> Primary Operating System Name :
> Channel Information
>
> Channel Number : 0
> Medium Type : IPMB (I2C)
> Protocol Type : IPMB-1.0
> Active Session Count : 0
> Session Support : session-less
> Vendor ID : Intelligent Platform Management Interface forum (7154)
>
> Channel Number : 1
> Medium Type : 802.3 LAN
> Protocol Type : IPMB-1.0
> Active Session Count : 1
> Session Support : multi-session
> Vendor ID : Intelligent Platform Management Interface forum (7154)
>
> Channel Number : 2
> Medium Type : Asynch. Serial/Modem (RS-232)
> Protocol Type : IPMB-1.0
> Active Session Count : 0
> Session Support : single-session
> Vendor ID : Intelligent Platform Management Interface forum (7154)
>
> Channel Number : 3
> Medium Type : System Interface (KCS, SMIC, or BT)
> Protocol Type : KCS
> Active Session Count : 0
> Session Support : session-less
> Vendor ID : Intelligent Platform Management Interface forum (7154)
>
> Channel Number : 4
> Medium Type : System Interface (KCS, SMIC, or BT)
> Protocol Type : KCS
> Active Session Count : 0
> Session Support : session-less
> Vendor ID : Intelligent Platform Management Interface forum (7154)
>
> -----Original Message-----
> From: address@hidden <address@hidden> On Behalf Of Albert Chu
> Sent: Thursday, July 4, 2019 3:23 PM
> To: FRANK Michael <address@hidden>
> Cc: address@hidden
> Subject: Re: [Freeipmi-users] Get BMC firmware version with freeipmi
>
> Hi Michael,
>
> Yes, you can use the bmc-info command.
>
> Al
>
> On Tue, Jul 2, 2019 at 6:43 AM FRANK Michael <address@hidden> wrote:
> >
> > Hello,
> >
> > Is it possible to find out with freeipmi which firmware version the BMC is
> > running.
> > Would be interesting to monitor if the servers having the recommended
> > software installed on their BMCs.
> >
> > Thanks for any feedback.
> >
> > Michael
> >
> > This electronic transmission (and any attachments thereto) is intended
> > solely for the use of the addressee(s). It may contain confidential or
> > legally privileged information. If you are not the intended recipient of
> > this message, you must delete it immediately and notify the sender. Any
> > unauthorized use or disclosure of this message is strictly prohibited.
> > Faurecia does not guarantee the integrity of this transmission and shall
> > therefore never be liable if the message is altered or falsified nor for
> > any virus, interception or damage to your system.
> >
> >
> > _______________________________________________
> > Freeipmi-users mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/freeipmi-users
>
> This electronic transmission (and any attachments thereto) is intended solely
> for the use of the addressee(s). It may contain confidential or legally
> privileged information. If you are not the intended recipient of this
> message, you must delete it immediately and notify the sender. Any
> unauthorized use or disclosure of this message is strictly prohibited.
> Faurecia does not guarantee the integrity of this transmission and shall
> therefore never be liable if the message is altered or falsified nor for any
> virus, interception or damage to your system.