[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] It is not possible to use `--fru-file` option in th
From: |
Al Chu |
Subject: |
Re: [Freeipmi-users] It is not possible to use `--fru-file` option in the `ipmi-fru` utility on non-IPMI system |
Date: |
Wed, 10 Feb 2021 11:49:30 -0800 |
Hi Konstantin,
Doh! It seems I made a cut & paste bug parsing "DC Load" identical to
"DC Output".
I've updated the branch
https://github.com/analogdevicesinc/fru_tools/tree/master/masterfiles
with a few fixes. It works for me now, could you try it out as a sanity check?
Al
On Mon, 2021-02-08 at 15:26 +0300, Konstantin Aladyshev wrote:
> Thanks Al!
>
> It helped. With this change the `ipmi-fru` utility can work on non-
> IPMI systems.
>
> By the way, I've tried to run `ipmi-fru` on some FRU images from the
> https://github.com/analogdevicesinc/fru_tools/tree/master/masterfiles
> And not all things were parsed successfully. I don't know, either
> these binaries have some non-standard records or `ipmi-fru` lacks
> some necessary features.
> But just in case here are some logs:
>
> aladyshev@PC10319:~/freeipmi_fru/ipmi-fru$ ./ipmi-fru --fru-file
> ~/fru_tools/masterfiles/AD-FMCADC2-EBZ-FRU.bin
> FRU Inventory From File:
> /home/aladyshev/fru_tools/masterfiles/AD-FMCADC2-EBZ-FRU.bin
>
> FRU Board Manufacturing Date/Time: 10/09/14 - 16:23:00
> FRU Board Manufacturer: Analog Devices
> FRU Board Product Name: AD9625 FMC Sync board
> FRU Board Serial Number: 00008
> FRU Board Part Number: AD-FMCADC2-EBZ
> FRU Board Custom Info: 00h 44h
> FRU Board Custom Info: 01h 30h 33h 36h 30h 30h 37h
> FRU Board Custom Info: 02h 30h
> FRU Board Custom Info: 03h 59h
>
> fru/ipmi-fru-data.c: 1246: ipmi_fru_multirecord_dc_load: error 'field
> not found' (7)
> ipmi_fru_multirecord_dc_load: invalid parameters
> api/ipmi-api.c: 2231: ipmi_ctx_close: error 'device null' (1)
> api/ipmi-api.c: 2276: ipmi_ctx_destroy: error 'device null' (1)
>
>
> aladyshev@PC10319:~/freeipmi_fru/ipmi-fru$ ./ipmi-fru --fru-file
> ~/fru_tools/masterfiles/ADRV9371-W.bin
> FRU Inventory From File:
> /home/aladyshev/fru_tools/masterfiles/ADRV9371-W.bin
>
> FRU Board Manufacturing Date/Time: 11/27/12 - 11:39:00
> FRU Board Manufacturer: Analog Devices
> FRU Board Product Name: Wide Tuning Range AD9371 Eval Brd
> FRU Board Serial Number: 0000
> FRU Board Part Number: ADRV9371-W/PCBZ
> FRU Board Custom Info: 00h 41h
> FRU Board Custom Info: 01h 30h 38h 2Dh 30h 34h 32h 35h 39h 31h
> FRU Board Custom Info: 02h 41h
> FRU Board Custom Info: 03h 59h
>
> FRU DC Output Output Number: 3
> FRU DC Output Output on Standy: No
> FRU DC Output Nominal Voltage: 2500 mV
> FRU DC Output Maximum Negative Voltage Deviation: 0 mV
> FRU DC Output Maximum Positive Voltage Deviation: 0 mV
> FRU DC Output Ripple and Noise pk-pk: 50 mV
> FRU DC Output Minimum Current Draw: 0 mA
> FRU DC Output Maximum Current Draw: 0 mA
>
> FRU DC Output Output Number: 4
> FRU DC Output Output on Standy: No
> FRU DC Output Nominal Voltage: 0 mV
> FRU DC Output Maximum Negative Voltage Deviation: 0 mV
> FRU DC Output Maximum Positive Voltage Deviation: 0 mV
> FRU DC Output Ripple and Noise pk-pk: 0 mV
> FRU DC Output Minimum Current Draw: 0 mA
> FRU DC Output Maximum Current Draw: 0 mA
>
> FRU DC Output Output Number: 5
> FRU DC Output Output on Standy: No
> FRU DC Output Nominal Voltage: 0 mV
> FRU DC Output Maximum Negative Voltage Deviation: 0 mV
> FRU DC Output Maximum Positive Voltage Deviation: 0 mV
> FRU DC Output Ripple and Noise pk-pk: 0 mV
> FRU DC Output Minimum Current Draw: 0 mA
> FRU DC Output Maximum Current Draw: 0 mA
>
> fru/ipmi-fru-data.c: 1246: ipmi_fru_multirecord_dc_load: error 'field
> not found' (7)
> ipmi_fru_multirecord_dc_load: invalid parameters
> api/ipmi-api.c: 2231: ipmi_ctx_close: error 'device null' (1)
> api/ipmi-api.c: 2276: ipmi_ctx_destroy: error 'device null' (1)
>
>
> Best regards,
> Konstantin Aladyshev
>
>
> On Sun, Feb 7, 2021 at 10:23 PM Al Chu <chu11@llnl.gov> wrote:
> >
> > Hi Konstantin,
> >
> > I have a fix at this branch on github if you could give it a shot:
> >
> > https://github.com/chu11/freeipmi-mirror/tree/ipmi_fru_file_only
> >
> > after downloading, to build:
> >
> > ./autogen.sh
> > ./configure --enable-debug --enable-trace
> > make
> > ipmi-fru/ipmi-fru --fru-file=...
> >
> > There will be extra debugging output when running this. If things
> > look
> > like its working, you can remove the "--enable-debug, --enable-
> > trace"
> > in the above to remove the debugging.
> >
> > Thanks,
> >
> > Al
> >
> >
> > On Sat, 2021-02-06 at 09:32 -0800, Al Chu via Freeipmi-users wrote:
> > > Hi Konstantin,
> > >
> > > Yeah, this seems to be a bug. I suppose it was always assumed
> > > people
> > > were on IPMI systems. I believe this was initially added b/c
> > > some
> > > IPMI
> > > developers wanted to debug/test their binaries.
> > >
> > > I'll add this as a TODO for myself and get back to you with a
> > > test
> > > branch you can try.
> > >
> > > Al
> > >
> > > On Fri, 2021-02-05 at 12:59 +0300, Konstantin Aladyshev wrote:
> > > > Is it possible to use `ipmi-fru` utility to parse local binary
> > > > FRU
> > > > file?
> > > > I want to do it from a separate host that doesn't have any IPMI
> > > > devices.
> > > > I thought that `--fru-file` option was designed specifically
> > > > for
> > > > this
> > > > case, but I can't get it working:
> > > >
> > > > ~/freeipmi-1.6.6/ipmi-fru$ sudo ./ipmi-fru -v
> > > > --fru-file=./AD-FMCADC2-EBZ-FRU.bin
> > > > could not find inband device
> > > >
> > > > So there seems to be a bug that assumes you are always running
> > > > on
> > > > an
> > > > IPMI system.
> > > >
> > > > Best regards,
> > > > Konstantin Aladyshev
> > > >
> > > > _______________________________________________
> > > > Freeipmi-users mailing list
> > > > Freeipmi-users@gnu.org
> > > > https://lists.gnu.org/mailman/listinfo/freeipmi-users
> > >
> > >
> > > _______________________________________________
> > > Freeipmi-users mailing list
> > > Freeipmi-users@gnu.org
> > > https://lists.gnu.org/mailman/listinfo/freeipmi-users