[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[freetype2] master 1061748: include/freettype/config:*.*: Convert commen
|
From: |
Werner LEMBERG |
|
Subject: |
[freetype2] master 1061748: include/freettype/config:*.*: Convert comments to Markdown syntax. |
|
Date: |
Mon, 3 Sep 2018 04:41:48 -0400 (EDT) |
branch: master
commit 1061748256bc35657709284ee65fd1ca8d28db71
Author: Werner Lemberg <address@hidden>
Commit: Werner Lemberg <address@hidden>
include/freettype/config:*.*: Convert comments to Markdown syntax.
Also some minor documentation fixes.
---
include/freetype/config/ftconfig.h | 155 ++++++++++----------
include/freetype/config/ftheader.h | 133 ++++++++---------
include/freetype/config/ftmodule.h | 6 +-
include/freetype/config/ftoption.h | 293 +++++++++++++++++++------------------
include/freetype/config/ftstdlib.h | 30 ++--
5 files changed, 315 insertions(+), 302 deletions(-)
diff --git a/include/freetype/config/ftconfig.h
b/include/freetype/config/ftconfig.h
index 7fabeb8..ac7c8f0 100644
--- a/include/freetype/config/ftconfig.h
+++ b/include/freetype/config/ftconfig.h
@@ -26,11 +26,11 @@
* Note however that if some specific modifications are needed, we advise
* you to place a modified copy in your build directory.
*
- * The build directory is usually 'builds/<system>', and contains
+ * The build directory is usually `builds/<system>`, and contains
* system-specific files that are always included first when building the
* library.
*
- * This ANSI version should stay in 'include/config/'.
+ * This ANSI version should stay in `include/config/`.
*
*/
@@ -52,25 +52,25 @@ FT_BEGIN_HEADER
* These macros can be toggled to suit a specific system. The current ones
* are defaults used to compile FreeType in an ANSI C environment (16bit
* compilers are also supported). Copy this file to your own
- * 'builds/<system>' directory, and edit it to port the engine.
+ * `builds/<system>` directory, and edit it to port the engine.
*
*/
- /* There are systems (like the Texas Instruments 'C54x) where a `char' */
- /* has 16 bits. ANSI C says that sizeof(char) is always 1. Since an */
- /* `int' has 16 bits also for this system, sizeof(int) gives 1 which */
- /* is probably unexpected. */
- /* */
- /* `CHAR_BIT' (defined in limits.h) gives the number of bits in a */
- /* `char' type. */
+ /* There are systems (like the Texas Instruments 'C54x) where a `char` */
+ /* has 16~bits. ANSI~C says that `sizeof(char)` is always~1. Since an */
+ /* `int` has 16~bits also for this system, `sizeof(int)` gives~1 which */
+ /* is probably unexpected. */
+ /* */
+ /* `CHAR_BIT` (defined in `limits.h`) gives the number of bits in a */
+ /* `char` type. */
#ifndef FT_CHAR_BIT
#define FT_CHAR_BIT CHAR_BIT
#endif
- /* The size of an `int' type. */
+ /* The size of an `int` type. */
#if FT_UINT_MAX == 0xFFFFUL
#define FT_SIZEOF_INT ( 16 / FT_CHAR_BIT )
#elif FT_UINT_MAX == 0xFFFFFFFFUL
@@ -81,7 +81,7 @@ FT_BEGIN_HEADER
#error "Unsupported size of `int' type!"
#endif
- /* The size of a `long' type. A five-byte `long' (as used e.g. on the */
+ /* The size of a `long` type. A five-byte `long` (as used e.g. on the */
/* DM642) is recognized but avoided. */
#if FT_ULONG_MAX == 0xFFFFFFFFUL
#define FT_SIZEOF_LONG ( 32 / FT_CHAR_BIT )
@@ -94,8 +94,8 @@ FT_BEGIN_HEADER
#endif
- /* FT_UNUSED is a macro used to indicate that a given parameter is not */
- /* used -- this is only used to get rid of unpleasant compiler warnings */
+ /* `FT_UNUSED` indicates that a given parameter is not used -- */
+ /* this is only used to get rid of unpleasant compiler warnings. */
#ifndef FT_UNUSED
#define FT_UNUSED( arg ) ( (arg) = (arg) )
#endif
@@ -120,9 +120,9 @@ FT_BEGIN_HEADER
* providing a new configuration file.
*/
#if defined( __APPLE__ ) || ( defined( __MWERKS__ ) && defined( macintosh ) )
- /* no Carbon frameworks for 64bit 10.4.x */
- /* AvailabilityMacros.h is available since Mac OS X 10.2, */
- /* so guess the system version by maximum errno before inclusion */
+ /* No Carbon frameworks for 64bit 10.4.x. */
+ /* `AvailabilityMacros.h` is available since Mac OS X 10.2, */
+ /* so guess the system version by maximum errno before inclusion. */
#include <errno.h>
#ifdef ECANCELED /* defined since 10.2 */
#include "AvailabilityMacros.h"
@@ -142,7 +142,7 @@ FT_BEGIN_HEADER
#endif
- /* Fix compiler warning with sgi compiler */
+ /* Fix compiler warning with sgi compiler. */
#if defined( __sgi ) && !defined( __GNUC__ )
#if defined( _COMPILER_VERSION ) && ( _COMPILER_VERSION >= 730 )
#pragma set woff 3505
@@ -250,7 +250,7 @@ FT_BEGIN_HEADER
#endif
- /* look up an integer type that is at least 32 bits */
+ /* look up an integer type that is at least 32~bits */
#if FT_SIZEOF_INT >= ( 32 / FT_CHAR_BIT )
typedef int FT_Fast;
@@ -268,7 +268,7 @@ FT_BEGIN_HEADER
/* Autoconf */
#if FT_SIZEOF_LONG == ( 64 / FT_CHAR_BIT )
- /* FT_LONG64 must be defined if a 64-bit type is available */
+ /* `FT_LONG64` must be defined if a 64-bit type is available */
#define FT_LONG64
#define FT_INT64 long
#define FT_UINT64 unsigned long
@@ -277,8 +277,8 @@ FT_BEGIN_HEADER
*
* A 64-bit data type may create compilation problems if you compile in
* strict ANSI mode. To avoid them, we disable other 64-bit data types if
- * __STDC__ is defined. You can however ignore this rule by defining the
- * FT_CONFIG_OPTION_FORCE_INT64 configuration macro.
+ * `__STDC__` is defined. You can however ignore this rule by defining the
+ * `FT_CONFIG_OPTION_FORCE_INT64` configuration macro.
*/
#elif !defined( __STDC__ ) || defined( FT_CONFIG_OPTION_FORCE_INT64 )
@@ -288,19 +288,19 @@ FT_BEGIN_HEADER
#define FT_INT64 long long int
#define FT_UINT64 unsigned long long int
-#elif defined( _MSC_VER ) && _MSC_VER >= 900 /* Visual C++ (and Intel C++) */
+#elif defined( _MSC_VER ) && _MSC_VER >= 900 /* Visual C++ (and Intel C++) */
- /* this compiler provides the __int64 type */
+ /* this compiler provides the `__int64` type */
#define FT_LONG64
#define FT_INT64 __int64
#define FT_UINT64 unsigned __int64
#elif defined( __BORLANDC__ ) /* Borland C++ */
- /* XXXX: We should probably check the value of __BORLANDC__ in order */
- /* to test the compiler version. */
+ /* XXXX: We should probably check the value of `__BORLANDC__` in order */
+ /* to test the compiler version. */
- /* this compiler provides the __int64 type */
+ /* this compiler provides the `__int64` type */
#define FT_LONG64
#define FT_INT64 __int64
#define FT_UINT64 unsigned __int64
@@ -317,7 +317,7 @@ FT_BEGIN_HEADER
#elif defined( __GNUC__ )
- /* GCC provides the `long long' type */
+ /* GCC provides the `long long` type */
#define FT_LONG64
#define FT_INT64 long long int
#define FT_UINT64 unsigned long long int
@@ -353,7 +353,7 @@ FT_BEGIN_HEADER
#define FT_DUMMY_STMNT FT_BEGIN_STMNT FT_END_STMNT
- /* typeof condition taken from gnulib's `intprops.h' header file */
+ /* `typeof` condition taken from gnulib's `intprops.h` header file */
#if ( ( defined( __GNUC__ ) && __GNUC__ >= 2 ) || \
( defined( __IBMC__ ) && __IBMC__ >= 1210 && \
defined( __IBM__TYPEOF__ ) ) || \
@@ -364,14 +364,14 @@ FT_BEGIN_HEADER
#endif
- /* Use FT_LOCAL and FT_LOCAL_DEF to declare and define, respectively, */
- /* a function that gets used only within the scope of a module. */
- /* Normally, both the header and source code files for such a */
- /* function are within a single module directory. */
- /* */
- /* Intra-module arrays should be tagged with FT_LOCAL_ARRAY and */
- /* FT_LOCAL_ARRAY_DEF. */
- /* */
+ /* Use `FT_LOCAL` and `FT_LOCAL_DEF` to declare and define, */
+ /* respectively, a function that gets used only within the scope of a */
+ /* module. Normally, both the header and source code files for such a */
+ /* function are within a single module directory. */
+ /* */
+ /* Intra-module arrays should be tagged with `FT_LOCAL_ARRAY` and */
+ /* `FT_LOCAL_ARRAY_DEF`. */
+ /* */
#ifdef FT_MAKE_OPTION_SINGLE_OBJECT
#define FT_LOCAL( x ) static x
@@ -393,12 +393,12 @@ FT_BEGIN_HEADER
#define FT_LOCAL_ARRAY_DEF( x ) const x
- /* Use FT_BASE and FT_BASE_DEF to declare and define, respectively, */
- /* functions that are used in more than a single module. In the */
- /* current setup this implies that the declaration is in a header */
- /* file in the `include/freetype/internal' directory, and the */
- /* function body is in a file in `src/base'. */
- /* */
+ /* Use `FT_BASE` and `FT_BASE_DEF` to declare and define, respectively, */
+ /* functions that are used in more than a single module. In the */
+ /* current setup this implies that the declaration is in a header file */
+ /* in the `include/freetype/internal` directory, and the function body */
+ /* is in a file in `src/base`. */
+ /* */
#ifndef FT_BASE
#ifdef __cplusplus
@@ -421,37 +421,40 @@ FT_BEGIN_HEADER
#endif /* !FT_BASE_DEF */
- /* When compiling FreeType as a DLL or DSO with hidden visibility */
- /* some systems/compilers need a special attribute in front OR after */
- /* the return type of function declarations. */
- /* */
- /* Two macros are used within the FreeType source code to define */
- /* exported library functions: FT_EXPORT and FT_EXPORT_DEF. */
- /* */
- /* FT_EXPORT( return_type ) */
- /* */
- /* is used in a function declaration, as in */
- /* */
- /* FT_EXPORT( FT_Error ) */
- /* FT_Init_FreeType( FT_Library* alibrary ); */
- /* */
- /* */
- /* FT_EXPORT_DEF( return_type ) */
- /* */
- /* is used in a function definition, as in */
- /* */
- /* FT_EXPORT_DEF( FT_Error ) */
- /* FT_Init_FreeType( FT_Library* alibrary ) */
- /* { */
- /* ... some code ... */
- /* return FT_Err_Ok; */
- /* } */
- /* */
- /* You can provide your own implementation of FT_EXPORT and */
- /* FT_EXPORT_DEF here if you want. */
- /* */
- /* To export a variable, use FT_EXPORT_VAR. */
- /* */
+ /* When compiling FreeType as a DLL or DSO with hidden visibility */
+ /* some systems/compilers need a special attribute in front OR after */
+ /* the return type of function declarations. */
+ /* */
+ /* Two macros are used within the FreeType source code to define */
+ /* exported library functions: `FT_EXPORT` and `FT_EXPORT_DEF`. */
+ /* */
+ /* - `FT_EXPORT( return_type )` */
+ /* */
+ /* is used in a function declaration, as in */
+ /* */
+ /* ``` */
+ /* FT_EXPORT( FT_Error ) */
+ /* FT_Init_FreeType( FT_Library* alibrary ); */
+ /* ``` */
+ /* */
+ /* - `FT_EXPORT_DEF( return_type )` */
+ /* */
+ /* is used in a function definition, as in */
+ /* */
+ /* ``` */
+ /* FT_EXPORT_DEF( FT_Error ) */
+ /* FT_Init_FreeType( FT_Library* alibrary ) */
+ /* { */
+ /* ... some code ... */
+ /* return FT_Err_Ok; */
+ /* } */
+ /* ``` */
+ /* */
+ /* You can provide your own implementation of `FT_EXPORT` and */
+ /* `FT_EXPORT_DEF` here if you want. */
+ /* */
+ /* To export a variable, use `FT_EXPORT_VAR`. */
+ /* */
#ifndef FT_EXPORT
#ifdef FT2_BUILD_LIBRARY
@@ -509,7 +512,7 @@ FT_BEGIN_HEADER
/* C++ compiler and with 16bit compilers. */
/* */
- /* This is special. Within C++, you must specify `extern "C"' for */
+ /* This is special. Within C++, you must specify `extern "C"` for */
/* functions which are used via function pointers, and you also */
/* must do that for structures which contain function pointers to */
/* assure C linkage -- it's not possible to have (local) anonymous */
@@ -532,7 +535,7 @@ FT_BEGIN_HEADER
/* */
/* */
/* Some 16bit compilers have to redefine these macros to insert */
- /* the infamous `_cdecl' or `__fastcall' declarations. */
+ /* the infamous `_cdecl` or `__fastcall` declarations. */
/* */
#ifndef FT_CALLBACK_DEF
#ifdef __cplusplus
diff --git a/include/freetype/config/ftheader.h
b/include/freetype/config/ftheader.h
index 36e6b33..9507258 100644
--- a/include/freetype/config/ftheader.h
+++ b/include/freetype/config/ftheader.h
@@ -27,7 +27,7 @@
/* <Description> */
/* This macro is used in association with @FT_END_HEADER in header */
/* files to ensure that the declarations within are properly */
- /* encapsulated in an `extern "C" { .. }' block when included from a */
+ /* encapsulated in an `extern "C" { .. }` block when included from a */
/* C++ compiler. */
/* */
#ifdef __cplusplus
@@ -45,7 +45,7 @@
/* <Description> */
/* This macro is used in association with @FT_BEGIN_HEADER in header */
/* files to ensure that the declarations within are properly */
- /* encapsulated in an `extern "C" { .. }' block when included from a */
+ /* encapsulated in an `extern "C" { .. }` block when included from a */
/* C++ compiler. */
/* */
#ifdef __cplusplus
@@ -70,11 +70,12 @@
* Header File Macros
*
* @abstract:
- * Macro definitions used to #include specific header files.
+ * Macro definitions used to `#include` specific header files.
*
* @description:
* The following macros are defined to the name of specific FreeType~2
- * header files. They can be used directly in #include statements as in:
+ * header files. They can be used directly in `#include` statements as
+ * in:
*
* ```
* #include FT_FREETYPE_H
@@ -101,7 +102,7 @@
* FT_CONFIG_CONFIG_H
*
* @description:
- * A macro used in #include statements to name the file containing
+ * A macro used in `#include` statements to name the file containing
* FreeType~2 configuration data.
*
*/
@@ -116,7 +117,7 @@
* FT_CONFIG_STANDARD_LIBRARY_H
*
* @description:
- * A macro used in #include statements to name the file containing
+ * A macro used in `#include` statements to name the file containing
* FreeType~2 interface to the standard C library functions.
*
*/
@@ -131,7 +132,7 @@
* FT_CONFIG_OPTIONS_H
*
* @description:
- * A macro used in #include statements to name the file containing
+ * A macro used in `#include` statements to name the file containing
* FreeType~2 project-specific configuration options.
*
*/
@@ -146,7 +147,7 @@
* FT_CONFIG_MODULES_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* list of FreeType~2 modules that are statically linked to new library
* instances in @FT_Init_FreeType.
*
@@ -165,7 +166,7 @@
* FT_FREETYPE_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* base FreeType~2 API.
*
*/
@@ -178,7 +179,7 @@
* FT_ERRORS_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* list of FreeType~2 error codes (and messages).
*
* It is included by @FT_FREETYPE_H.
@@ -193,7 +194,7 @@
* FT_MODULE_ERRORS_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* list of FreeType~2 module error offsets (and messages).
*
*/
@@ -206,7 +207,7 @@
* FT_SYSTEM_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* FreeType~2 interface to low-level operations (i.e., memory management
* and stream i/o).
*
@@ -222,7 +223,7 @@
* FT_IMAGE_H
*
* @description:
- * A macro used in #include statements to name the file containing type
+ * A macro used in `#include` statements to name the file containing type
* definitions related to glyph images (i.e., bitmaps, outlines,
* scan-converter parameters).
*
@@ -238,7 +239,7 @@
* FT_TYPES_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* basic data types defined by FreeType~2.
*
* It is included by @FT_FREETYPE_H.
@@ -253,7 +254,7 @@
* FT_LIST_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* list management API of FreeType~2.
*
* (Most applications will never need to include this file.)
@@ -268,7 +269,7 @@
* FT_OUTLINE_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* scalable outline management API of FreeType~2.
*
*/
@@ -281,7 +282,7 @@
* FT_SIZES_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* API which manages multiple @FT_Size objects per face.
*
*/
@@ -294,7 +295,7 @@
* FT_MODULE_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* module management API of FreeType~2.
*
*/
@@ -307,7 +308,7 @@
* FT_RENDER_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* renderer module management API of FreeType~2.
*
*/
@@ -320,7 +321,7 @@
* FT_DRIVER_H
*
* @description:
- * A macro used in #include statements to name the file containing
+ * A macro used in `#include` statements to name the file containing
* structures and macros related to the driver modules.
*
*/
@@ -333,10 +334,10 @@
* FT_AUTOHINTER_H
*
* @description:
- * A macro used in #include statements to name the file containing
+ * A macro used in `#include` statements to name the file containing
* structures and macros related to the auto-hinting module.
*
- * Deprecated since version 2.9; use @FT_DRIVER_H instead.
+ * Deprecated since version~2.9; use @FT_DRIVER_H instead.
*
*/
#define FT_AUTOHINTER_H FT_DRIVER_H
@@ -348,10 +349,10 @@
* FT_CFF_DRIVER_H
*
* @description:
- * A macro used in #include statements to name the file containing
+ * A macro used in `#include` statements to name the file containing
* structures and macros related to the CFF driver module.
*
- * Deprecated since version 2.9; use @FT_DRIVER_H instead.
+ * Deprecated since version~2.9; use @FT_DRIVER_H instead.
*
*/
#define FT_CFF_DRIVER_H FT_DRIVER_H
@@ -363,10 +364,10 @@
* FT_TRUETYPE_DRIVER_H
*
* @description:
- * A macro used in #include statements to name the file containing
+ * A macro used in `#include` statements to name the file containing
* structures and macros related to the TrueType driver module.
*
- * Deprecated since version 2.9; use @FT_DRIVER_H instead.
+ * Deprecated since version~2.9; use @FT_DRIVER_H instead.
*
*/
#define FT_TRUETYPE_DRIVER_H FT_DRIVER_H
@@ -378,10 +379,10 @@
* FT_PCF_DRIVER_H
*
* @description:
- * A macro used in #include statements to name the file containing
+ * A macro used in `#include` statements to name the file containing
* structures and macros related to the PCF driver module.
*
- * Deprecated since version 2.9; use @FT_DRIVER_H instead.
+ * Deprecated since version~2.9; use @FT_DRIVER_H instead.
*
*/
#define FT_PCF_DRIVER_H FT_DRIVER_H
@@ -393,7 +394,7 @@
* FT_TYPE1_TABLES_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* types and API specific to the Type~1 format.
*
*/
@@ -406,7 +407,7 @@
* FT_TRUETYPE_IDS_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* enumeration values which identify name strings, languages, encodings,
* etc. This file really contains a _large_ set of constant macro
* definitions, taken from the TrueType and OpenType specifications.
@@ -421,7 +422,7 @@
* FT_TRUETYPE_TABLES_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* types and API specific to the TrueType (as well as OpenType) format.
*
*/
@@ -434,7 +435,7 @@
* FT_TRUETYPE_TAGS_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* definitions of TrueType four-byte 'tags' which identify blocks in
* SFNT-based font formats (i.e., TrueType and OpenType).
*
@@ -448,7 +449,7 @@
* FT_BDF_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* definitions of an API which accesses BDF-specific strings from a face.
*
*/
@@ -461,7 +462,7 @@
* FT_CID_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* definitions of an API which access CID font information from a face.
*
*/
@@ -474,7 +475,7 @@
* FT_GZIP_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* definitions of an API which supports gzip-compressed files.
*
*/
@@ -487,7 +488,7 @@
* FT_LZW_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* definitions of an API which supports LZW-compressed files.
*
*/
@@ -500,7 +501,7 @@
* FT_BZIP2_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* definitions of an API which supports bzip2-compressed files.
*
*/
@@ -513,7 +514,7 @@
* FT_WINFONTS_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* definitions of an API which supports Windows FNT files.
*
*/
@@ -526,7 +527,7 @@
* FT_GLYPH_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* API of the optional glyph management component.
*
*/
@@ -539,7 +540,7 @@
* FT_BITMAP_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* API of the optional bitmap conversion component.
*
*/
@@ -552,7 +553,7 @@
* FT_BBOX_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* API of the optional exact bounding box computation routines.
*
*/
@@ -565,7 +566,7 @@
* FT_CACHE_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* API of the optional FreeType~2 cache sub-system.
*
*/
@@ -578,7 +579,7 @@
* FT_MAC_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* Macintosh-specific FreeType~2 API. The latter is used to access fonts
* embedded in resource forks.
*
@@ -595,7 +596,7 @@
* FT_MULTIPLE_MASTERS_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* optional multiple-masters management API of FreeType~2.
*
*/
@@ -608,7 +609,7 @@
* FT_SFNT_NAMES_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* optional FreeType~2 API which accesses embedded 'name' strings in
* SFNT-based font formats (i.e., TrueType and OpenType).
*
@@ -622,9 +623,9 @@
* FT_OPENTYPE_VALIDATE_H
*
* @description:
- * A macro used in #include statements to name the file containing the
- * optional FreeType~2 API which validates OpenType tables (BASE, GDEF,
- * GPOS, GSUB, JSTF).
+ * A macro used in `#include` statements to name the file containing the
+ * optional FreeType~2 API which validates OpenType tables (`BASE`,
+ * `GDEF`, `GPOS`, `GSUB`, `JSTF`).
*
*/
#define FT_OPENTYPE_VALIDATE_H <freetype/ftotval.h>
@@ -636,9 +637,9 @@
* FT_GX_VALIDATE_H
*
* @description:
- * A macro used in #include statements to name the file containing the
- * optional FreeType~2 API which validates TrueTypeGX/AAT tables (feat,
- * mort, morx, bsln, just, kern, opbd, trak, prop).
+ * A macro used in `#include` statements to name the file containing the
+ * optional FreeType~2 API which validates TrueTypeGX/AAT tables (`feat`,
+ * `mort`, `morx`, `bsln`, `just`, `kern`, `opbd`, `trak`, `prop`).
*
*/
#define FT_GX_VALIDATE_H <freetype/ftgxval.h>
@@ -650,7 +651,7 @@
* FT_PFR_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* FreeType~2 API which accesses PFR-specific data.
*
*/
@@ -663,7 +664,7 @@
* FT_STROKER_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* FreeType~2 API which provides functions to stroke outline paths.
*/
#define FT_STROKER_H <freetype/ftstroke.h>
@@ -675,7 +676,7 @@
* FT_SYNTHESIS_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* FreeType~2 API which performs artificial obliquing and emboldening.
*/
#define FT_SYNTHESIS_H <freetype/ftsynth.h>
@@ -687,7 +688,7 @@
* FT_FONT_FORMATS_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* FreeType~2 API which provides functions specific to font formats.
*/
#define FT_FONT_FORMATS_H <freetype/ftfntfmt.h>
@@ -702,7 +703,7 @@
* FT_TRIGONOMETRY_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* FreeType~2 API which performs trigonometric computations (e.g.,
* cosines and arc tangents).
*/
@@ -715,7 +716,7 @@
* FT_LCD_FILTER_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* FreeType~2 API which performs color filtering for subpixel rendering.
*/
#define FT_LCD_FILTER_H <freetype/ftlcdfil.h>
@@ -727,7 +728,7 @@
* FT_INCREMENTAL_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* FreeType~2 API which performs incremental glyph loading.
*/
#define FT_INCREMENTAL_H <freetype/ftincrem.h>
@@ -739,7 +740,7 @@
* FT_GASP_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* FreeType~2 API which returns entries from the TrueType GASP table.
*/
#define FT_GASP_H <freetype/ftgasp.h>
@@ -751,7 +752,7 @@
* FT_ADVANCES_H
*
* @description:
- * A macro used in #include statements to name the file containing the
+ * A macro used in `#include` statements to name the file containing the
* FreeType~2 API which returns individual and ranged glyph advances.
*/
#define FT_ADVANCES_H <freetype/ftadvanc.h>
@@ -763,8 +764,8 @@
* FT_COLOR_H
*
* @description:
- * A macro used in #include statements to name the file containing the
- * FreeType~2 API which handles the OpenType CPAL table.
+ * A macro used in `#include` statements to name the file containing the
+ * FreeType~2 API which handles the OpenType `CPAL` table.
*/
#define FT_COLOR_H <freetype/ftcolor.h>
@@ -779,14 +780,14 @@
#define FT_UNPATENTED_HINTING_H <freetype/ftparams.h>
#define FT_TRUETYPE_UNPATENTED_H <freetype/ftparams.h>
- /* FT_CACHE_H is the only header file needed for the cache subsystem. */
+ /* `FT_CACHE_H` is the only header file needed for the cache subsystem. */
#define FT_CACHE_IMAGE_H FT_CACHE_H
#define FT_CACHE_SMALL_BITMAPS_H FT_CACHE_H
#define FT_CACHE_CHARMAP_H FT_CACHE_H
/* The internals of the cache sub-system are no longer exposed. We */
- /* default to FT_CACHE_H at the moment just in case, but we know of */
- /* no rogue client that uses them. */
+ /* default to `FT_CACHE_H` at the moment just in case, but we know */
+ /* of no rogue client that uses them. */
/* */
#define FT_CACHE_MANAGER_H FT_CACHE_H
#define FT_CACHE_INTERNAL_MRU_H FT_CACHE_H
@@ -798,7 +799,7 @@
/*
- * Include internal headers definitions from <internal/...> only when
+ * Include internal headers definitions from `<internal/...>` only when
* building the library.
*/
#ifdef FT2_BUILD_LIBRARY
diff --git a/include/freetype/config/ftmodule.h
b/include/freetype/config/ftmodule.h
index 820c11c..7c603e5 100644
--- a/include/freetype/config/ftmodule.h
+++ b/include/freetype/config/ftmodule.h
@@ -2,10 +2,10 @@
* This file registers the FreeType modules compiled into the library.
*
* If you use GNU make, this file IS NOT USED! Instead, it is created in
- * the objects directory (normally `<topdir>/objs/') based on information
- * from `<topdir>/modules.cfg'.
+ * the objects directory (normally `<topdir>/objs/`) based on information
+ * from `<topdir>/modules.cfg`.
*
- * Please read `docs/INSTALL.ANY' and `docs/CUSTOMIZE' how to compile
+ * Please read `docs/INSTALL.ANY` and `docs/CUSTOMIZE` how to compile
* FreeType without GNU make.
*
*/
diff --git a/include/freetype/config/ftoption.h
b/include/freetype/config/ftoption.h
index dc6424c..5f0b0c1 100644
--- a/include/freetype/config/ftoption.h
+++ b/include/freetype/config/ftoption.h
@@ -38,16 +38,16 @@ FT_BEGIN_HEADER
* from a single source directory.
*
* - You can put a copy of this file in your build directory, more
- * precisely in '$BUILD/freetype/config/ftoption.h', where '$BUILD' is
+ * precisely in `$BUILD/freetype/config/ftoption.h`, where `$BUILD` is
* the name of a directory that is included _before_ the FreeType include
* path during compilation.
*
* The default FreeType Makefiles and Jamfiles use the build directory
- * 'builds/<system>' by default, but you can easily change that for your
+ * `builds/<system>` by default, but you can easily change that for your
* own projects.
*
- * - Copy the file <ft2build.h> to '$BUILD/ft2build.h' and modify it
- * slightly to pre-define the macro FT_CONFIG_OPTIONS_H used to locate
+ * - Copy the file <ft2build.h> to `$BUILD/ft2build.h` and modify it
+ * slightly to pre-define the macro `FT_CONFIG_OPTIONS_H` used to locate
* this file during the build. For example,
*
* ```
@@ -55,13 +55,13 @@ FT_BEGIN_HEADER
* #include <freetype/config/ftheader.h>
* ```
*
- * will use '$BUILD/myftoptions.h' instead of this file for macro
+ * will use `$BUILD/myftoptions.h` instead of this file for macro
* definitions.
*
* Note also that you can similarly pre-define the macro
- * FT_CONFIG_MODULES_H used to locate the file listing of the modules
+ * `FT_CONFIG_MODULES_H` used to locate the file listing of the modules
* that are statically linked to the library at compile time. By
- * default, this file is <freetype/config/ftmodule.h>.
+ * default, this file is `<freetype/config/ftmodule.h>`.
*
* We highly recommend using the third method whenever possible.
*
@@ -80,18 +80,18 @@ FT_BEGIN_HEADER
/*#************************************************************************
*
* If you enable this configuration option, FreeType recognizes an
- * environment variable called `FREETYPE_PROPERTIES', which can be used to
+ * environment variable called `FREETYPE_PROPERTIES`, which can be used to
* control the various font drivers and modules. The controllable
* properties are listed in the section @properties.
*
* You have to undefine this configuration option on platforms that lack
- * the concept of environment variables (and thus don't have the `getenv'
+ * the concept of environment variables (and thus don't have the `getenv`
* function), for example Windows CE.
*
- * `FREETYPE_PROPERTIES' has the following syntax form (broken here into
+ * `FREETYPE_PROPERTIES` has the following syntax form (broken here into
* multiple lines for better readability).
*
- * {
+ * ```
* <optional whitespace>
* <module-name1> ':'
* <property-name1> '=' <property-value1>
@@ -99,15 +99,15 @@ FT_BEGIN_HEADER
* <module-name2> ':'
* <property-name2> '=' <property-value2>
* ...
- * }
+ * ```
*
* Example:
*
- * {
+ * ```
* FREETYPE_PROPERTIES=truetype:interpreter-version=35 \
* cff:no-stem-darkening=1 \
* autofitter:warping=1
- * }
+ * ```
*
*/
#define FT_CONFIG_OPTION_ENVIRONMENT_PROPERTIES
@@ -136,14 +136,14 @@ FT_BEGIN_HEADER
* problems when compiling the library in strict ANSI mode.
*
* For this reason, the use of 64-bit integers is normally disabled when
- * the __STDC__ macro is defined. You can however disable this by defining
- * the macro FT_CONFIG_OPTION_FORCE_INT64 here.
+ * the `__STDC__` macro is defined. You can however disable this by
+ * defining the macro `FT_CONFIG_OPTION_FORCE_INT64` here.
*
* For most compilers, this will only create compilation warnings when
* building the library.
*
* ObNote: The compiler-specific 64-bit integers are detected in the
- * file `ftconfig.h` either statically or through the 'configure'
+ * file `ftconfig.h` either statically or through the `configure`
* script on supported platforms.
*/
#undef FT_CONFIG_OPTION_FORCE_INT64
@@ -152,7 +152,7 @@ FT_BEGIN_HEADER
/**************************************************************************
*
* If this macro is defined, do not try to use an assembler version of
- * performance-critical functions (e.g. FT_MulFix). You should only do
+ * performance-critical functions (e.g., @FT_MulFix). You should only do
* that to verify that the assembler function works properly, or to execute
* benchmark tests of the various implementations.
*/
@@ -162,7 +162,7 @@ FT_BEGIN_HEADER
/**************************************************************************
*
* If this macro is defined, try to use an inlined assembler version of the
- * `FT_MulFix` function, which is a 'hotspot' when loading and hinting
+ * @FT_MulFix function, which is a 'hotspot' when loading and hinting
* glyphs, and which should be executed as fast as possible.
*
* Note that if your compiler or CPU is not supported, this will default to
@@ -176,10 +176,10 @@ FT_BEGIN_HEADER
* LZW-compressed file support.
*
* FreeType now handles font files that have been compressed with the
- * 'compress' program. This is mostly used to parse many of the PCF
+ * `compress` program. This is mostly used to parse many of the PCF
* files that come with various X11 distributions. The implementation
- * uses NetBSD's 'zopen' to partially uncompress the file on the fly (see
- * src/lzw/ftgzip.c).
+ * uses NetBSD's `zopen` to partially uncompress the file on the fly (see
+ * `src/lzw/ftgzip.c`).
*
* Define this macro if you want to enable this 'feature'.
*/
@@ -191,12 +191,12 @@ FT_BEGIN_HEADER
* Gzip-compressed file support.
*
* FreeType now handles font files that have been compressed with the
- * 'gzip' program. This is mostly used to parse many of the PCF files
+ * `gzip` program. This is mostly used to parse many of the PCF files
* that come with XFree86. The implementation uses 'zlib' to partially
- * uncompress the file on the fly (see src/gzip/ftgzip.c).
+ * uncompress the file on the fly (see `src/gzip/ftgzip.c`).
*
* Define this macro if you want to enable this 'feature'. See also the
- * macro FT_CONFIG_OPTION_SYSTEM_ZLIB below.
+ * macro `FT_CONFIG_OPTION_SYSTEM_ZLIB` below.
*/
#define FT_CONFIG_OPTION_USE_ZLIB
@@ -205,10 +205,10 @@ FT_BEGIN_HEADER
*
* ZLib library selection
*
- * This macro is only used when FT_CONFIG_OPTION_USE_ZLIB is defined. It
- * allows FreeType's 'ftgzip' component to link to the system's
- * installation of the ZLib library. This is useful on systems like Unix
- * or VMS where it generally is already available.
+ * This macro is only used when `FT_CONFIG_OPTION_USE_ZLIB` is defined.
+ * It allows FreeType's 'ftgzip' component to link to the system's
+ * installation of the ZLib library. This is useful on systems like
+ * Unix or VMS where it generally is already available.
*
* If you let it undefined, the component will use its own copy of the
* zlib sources instead. These have been modified to be included
@@ -216,10 +216,10 @@ FT_BEGIN_HEADER
* names. This allows you to link any program with FreeType _and_ ZLib
* without linking conflicts.
*
- * Do not #undef this macro here since the build system might define it
- * for certain configurations only.
+ * Do not `#undef` this macro here since the build system might define
+ * it for certain configurations only.
*
- * If you use a build system like cmake or the 'configure' script,
+ * If you use a build system like cmake or the `configure` script,
* options set by those programs have precedence, overwriting the value
* here with the configured one.
*/
@@ -231,15 +231,15 @@ FT_BEGIN_HEADER
* Bzip2-compressed file support.
*
* FreeType now handles font files that have been compressed with the
- * 'bzip2' program. This is mostly used to parse many of the PCF files
- * that come with XFree86. The implementation uses 'libbz2' to partially
- * uncompress the file on the fly (see src/bzip2/ftbzip2.c). Contrary to
- * gzip, bzip2 currently is not included and need to use the system
+ * `bzip2` program. This is mostly used to parse many of the PCF files
+ * that come with XFree86. The implementation uses `libbz2` to partially
+ * uncompress the file on the fly (see `src/bzip2/ftbzip2.c`). Contrary
+ * to gzip, bzip2 currently is not included and need to use the system
* available bzip2 implementation.
*
* Define this macro if you want to enable this 'feature'.
*
- * If you use a build system like cmake or the 'configure' script,
+ * If you use a build system like cmake or the `configure` script,
* options set by those programs have precedence, overwriting the value
* here with the configured one.
*/
@@ -248,8 +248,8 @@ FT_BEGIN_HEADER
/**************************************************************************
*
- * Define to disable the use of file stream functions and types, FILE,
- * fopen() etc. Enables the use of smaller system libraries on embedded
+ * Define to disable the use of file stream functions and types, `FILE`,
+ * `fopen`, etc. Enables the use of smaller system libraries on embedded
* systems that have multiple system libraries, some with or without file
* stream support, in the cases where file stream support is not necessary
* such as memory loading of font files.
@@ -268,7 +268,7 @@ FT_BEGIN_HEADER
*
* Define this macro if you want to enable this 'feature'.
*
- * If you use a build system like cmake or the 'configure' script,
+ * If you use a build system like cmake or the `configure` script,
* options set by those programs have precedence, overwriting the value
* here with the configured one.
*/
@@ -285,7 +285,7 @@ FT_BEGIN_HEADER
*
* Define this macro if you want to enable this 'feature'.
*
- * If you use a build system like cmake or the 'configure' script,
+ * If you use a build system like cmake or the `configure` script,
* options set by those programs have precedence, overwriting the value
* here with the configured one.
*/
@@ -299,20 +299,20 @@ FT_BEGIN_HEADER
* By default, FreeType 2 is compiled with the 'psnames' module. This
* module is in charge of converting a glyph name string into a Unicode
* value, or return a Macintosh standard glyph name for the use with the
- * TrueType 'post' table.
+ * TrueType `post` table.
*
* Undefine this macro if you do not want 'psnames' compiled in your
* build of FreeType. This has the following effects:
*
- * - The TrueType driver will provide its own set of glyph names,
- * if you build it to support postscript names in the TrueType 'post'
- * table, but will not synthesize a missing Unicode charmap.
+ * - The TrueType driver will provide its own set of glyph names, if you
+ * build it to support postscript names in the TrueType `post` table,
+ * but will not synthesize a missing Unicode charmap.
*
- * - The Type 1 driver will not be able to synthesize a Unicode
- * charmap out of the glyphs found in the fonts.
+ * - The Type~1 driver will not be able to synthesize a Unicode charmap
+ * out of the glyphs found in the fonts.
*
* You would normally undefine this configuration macro when building a
- * version of FreeType that doesn't contain a Type 1 or CFF driver.
+ * version of FreeType that doesn't contain a Type~1 or CFF driver.
*/
#define FT_CONFIG_OPTION_POSTSCRIPT_NAMES
@@ -321,14 +321,14 @@ FT_BEGIN_HEADER
*
* Postscript Names to Unicode Values support
*
- * By default, FreeType 2 is built with the 'psnames' module compiled in.
+ * By default, FreeType~2 is built with the 'psnames' module compiled in.
* Among other things, the module is used to convert a glyph name into a
* Unicode value. This is especially useful in order to synthesize on
- * the fly a Unicode charmap from the CFF/Type 1 driver through a big
+ * the fly a Unicode charmap from the CFF/Type~1 driver through a big
* table named the 'Adobe Glyph List' (AGL).
*
* Undefine this macro if you do not want the Adobe Glyph List compiled
- * in your 'psnames' module. The Type 1 driver will not be able to
+ * in your 'psnames' module. The Type~1 driver will not be able to
* synthesize a Unicode charmap out of the glyphs found in the fonts.
*/
#define FT_CONFIG_OPTION_ADOBE_GLYPH_LIST
@@ -342,7 +342,7 @@ FT_BEGIN_HEADER
* (mac dfont, mac resource, macbinary containing a mac resource) on
* non-Mac platforms.
*
- * Note that the 'FOND' resource isn't checked.
+ * Note that the `FOND` resource isn't checked.
*/
#define FT_CONFIG_OPTION_MAC_FONTS
@@ -361,7 +361,7 @@ FT_BEGIN_HEADER
* to guess whether such offsets or different file names must be used.
*
* Note that normal, direct access of resource forks is controlled via
- * the FT_CONFIG_OPTION_MAC_FONTS option.
+ * the `FT_CONFIG_OPTION_MAC_FONTS` option.
*/
#ifdef FT_CONFIG_OPTION_MAC_FONTS
#define FT_CONFIG_OPTION_GUESSING_EMBEDDED_RFORK
@@ -370,9 +370,9 @@ FT_BEGIN_HEADER
/**************************************************************************
*
- * Allow the use of FT_Incremental_Interface to load typefaces that contain
- * no glyph data, but supply it via a callback function. This is required
- * by clients supporting document formats which supply font data
+ * Allow the use of `FT_Incremental_Interface` to load typefaces that
+ * contain no glyph data, but supply it via a callback function. This is
+ * required by clients supporting document formats which supply font data
* incrementally as the document is parsed, such as the Ghostscript
* interpreter for the PostScript language.
*/
@@ -392,7 +392,7 @@ FT_BEGIN_HEADER
* FT_MAX_MODULES
*
* The maximum number of modules that can be registered in a single
- * FreeType library object. 32 is the default.
+ * FreeType library object. 32~is the default.
*/
#define FT_MAX_MODULES 32
@@ -405,12 +405,12 @@ FT_BEGIN_HEADER
* errors are reported through the 'ftdebug' component. In trace mode,
* additional messages are sent to the standard output during execution.
*
- * Define FT_DEBUG_LEVEL_ERROR to build the library in debug mode.
- * Define FT_DEBUG_LEVEL_TRACE to build it in trace mode.
+ * Define `FT_DEBUG_LEVEL_ERROR` to build the library in debug mode.
+ * Define `FT_DEBUG_LEVEL_TRACE` to build it in trace mode.
*
* Don't define any of these macros to compile in 'release' mode!
*
- * Do not #undef these macros here since the build system might define
+ * Do not `#undef` these macros here since the build system might define
* them for certain configurations only.
*/
/* #define FT_DEBUG_LEVEL_ERROR */
@@ -421,7 +421,7 @@ FT_BEGIN_HEADER
*
* Autofitter debugging
*
- * If FT_DEBUG_AUTOFIT is defined, FreeType provides some means to
+ * If `FT_DEBUG_AUTOFIT` is defined, FreeType provides some means to
* control the autofitter behaviour for debugging purposes with global
* boolean variables (consequently, you should **never** enable this
* while compiling in 'release' mode):
@@ -433,7 +433,7 @@ FT_BEGIN_HEADER
* ```
*
* Additionally, the following functions provide dumps of various
- * internal autofit structures to stdout (using 'printf'):
+ * internal autofit structures to stdout (using `printf`):
*
* ```
* af_glyph_hints_dump_points
@@ -449,10 +449,10 @@ FT_BEGIN_HEADER
* _af_debug_hints
* ```
*
- * Please have a look at the 'ftgrid' demo program to see how those
+ * Please have a look at the `ftgrid` demo program to see how those
* variables and macros should be used.
*
- * Do not #undef these macros here since the build system might define
+ * Do not `#undef` these macros here since the build system might define
* them for certain configurations only.
*/
/* #define FT_DEBUG_AUTOFIT */
@@ -465,12 +465,12 @@ FT_BEGIN_HEADER
* FreeType now comes with an integrated memory debugger that is capable
* of detecting simple errors like memory leaks or double deletes. To
* compile it within your build of the library, you should define
- * FT_DEBUG_MEMORY here.
+ * `FT_DEBUG_MEMORY` here.
*
* Note that the memory debugger is only activated at runtime when when
* the _environment_ variable `FT2_DEBUG_MEMORY` is defined also!
*
- * Do not #undef this macro here since the build system might define it
+ * Do not `#undef` this macro here since the build system might define it
* for certain configurations only.
*/
/* #define FT_DEBUG_MEMORY */
@@ -485,10 +485,10 @@ FT_BEGIN_HEADER
* the lower byte is the real error code.
*
* Setting this macro makes sense for debugging purposes only, since it
- * would break source compatibility of certain programs that use FreeType
- * 2.
+ * would break source compatibility of certain programs that use
+ * FreeType~2.
*
- * More details can be found in the files ftmoderr.h and fterrors.h.
+ * More details can be found in the files `ftmoderr.h` and `fterrors.h`.
*/
#undef FT_CONFIG_OPTION_USE_MODULE_ERRORS
@@ -497,11 +497,11 @@ FT_BEGIN_HEADER
*
* Error Strings
*
- * If this macro is set, `FT_Error_String' will return meaningful
+ * If this macro is set, `FT_Error_String` will return meaningful
* descriptions. This is not enabled by default to reduce the overall
* size of FreeType.
*
- * More details can be found in the file fterrors.h.
+ * More details can be found in the file `fterrors.h`.
*/
/* #define FT_CONFIG_OPTION_ERROR_STRINGS */
@@ -517,30 +517,31 @@ FT_BEGIN_HEADER
/**************************************************************************
*
- * Define TT_CONFIG_OPTION_EMBEDDED_BITMAPS if you want to support embedded
- * bitmaps in all formats using the SFNT module (namely TrueType &
- * OpenType).
+ * Define `TT_CONFIG_OPTION_EMBEDDED_BITMAPS` if you want to support
+ * embedded bitmaps in all formats using the 'sfnt' module (namely
+ * TrueType~& OpenType).
*/
#define TT_CONFIG_OPTION_EMBEDDED_BITMAPS
/**************************************************************************
*
- * Define TT_CONFIG_OPTION_COLOR_LAYERS if you want to support coloured
- * outlines (from the COLR/CPAL tables) in all formats using the SFNT
- * module (namely TrueType & OpenType).
+ * Define `TT_CONFIG_OPTION_COLOR_LAYERS` if you want to support coloured
+ * outlines (from the `COLR`/`CPAL` tables) in all formats using the 'sfnt'
+ * module (namely TrueType~& OpenType).
*/
#define TT_CONFIG_OPTION_COLOR_LAYERS
/**************************************************************************
*
- * Define TT_CONFIG_OPTION_POSTSCRIPT_NAMES if you want to be able to load
- * and enumerate the glyph Postscript names in a TrueType or OpenType file.
+ * Define `TT_CONFIG_OPTION_POSTSCRIPT_NAMES` if you want to be able to
+ * load and enumerate the glyph Postscript names in a TrueType or OpenType
+ * file.
*
* Note that when you do not compile the 'psnames' module by undefining the
- * above FT_CONFIG_OPTION_POSTSCRIPT_NAMES, the 'sfnt' module will contain
- * additional code used to read the PS Names table from a font.
+ * above `FT_CONFIG_OPTION_POSTSCRIPT_NAMES`, the 'sfnt' module will
+ * contain additional code used to read the PS Names table from a font.
*
* (By default, the module uses 'psnames' to extract glyph names.)
*/
@@ -549,7 +550,7 @@ FT_BEGIN_HEADER
/**************************************************************************
*
- * Define TT_CONFIG_OPTION_SFNT_NAMES if your applications need to access
+ * Define `TT_CONFIG_OPTION_SFNT_NAMES` if your applications need to access
* the internal name table in a SFNT-based format like TrueType or
* OpenType. The name table contains various strings used to describe the
* font, like family name, copyright, version, etc. It does not contain
@@ -589,23 +590,24 @@ FT_BEGIN_HEADER
/**************************************************************************
*
- * Define TT_CONFIG_OPTION_BYTECODE_INTERPRETER if you want to compile a
+ * Define `TT_CONFIG_OPTION_BYTECODE_INTERPRETER` if you want to compile a
* bytecode interpreter in the TrueType driver.
*
* By undefining this, you will only compile the code necessary to load
* TrueType glyphs without hinting.
*
- * Do not #undef this macro here, since the build system might define it
- * for certain configurations only.
+ * Do not `#undef` this macro here, since the build system might define it
+ * for certain configurations only.
*/
#define TT_CONFIG_OPTION_BYTECODE_INTERPRETER
/**************************************************************************
*
- * Define TT_CONFIG_OPTION_SUBPIXEL_HINTING if you want to compile subpixel
- * hinting support into the TrueType driver. This modifies the TrueType
- * hinting mechanism when anything but FT_RENDER_MODE_MONO is requested.
+ * Define `TT_CONFIG_OPTION_SUBPIXEL_HINTING` if you want to compile
+ * subpixel hinting support into the TrueType driver. This modifies the
+ * TrueType hinting mechanism when anything but `FT_RENDER_MODE_MONO` is
+ * requested.
*
* In particular, it modifies the bytecode interpreter to interpret (or
* not) instructions in a certain way so that all TrueType fonts look like
@@ -630,8 +632,8 @@ FT_BEGIN_HEADER
* The new default mode for the TrueType driver. The Infinality code
* base was stripped to the bare minimum and all configurability removed
* in the name of speed and simplicity. The configurability was mainly
- * aimed at legacy fonts like Arial, Times New Roman, or Courier. Legacy
- * fonts are fonts that modify vertical stems to achieve clean
+ * aimed at legacy fonts like 'Arial', 'Times New Roman', or 'Courier'.
+ * Legacy fonts are fonts that modify vertical stems to achieve clean
* black-and-white bitmaps. The new mode focuses on applying a minimal
* set of rules to all fonts indiscriminately so that modern and web
* fonts render well while legacy fonts render okay.
@@ -649,7 +651,7 @@ FT_BEGIN_HEADER
* define one or both subpixel hinting options, you can switch between
* between v35 and the ones you define (using `FT_Property_Set`).
*
- * This option requires TT_CONFIG_OPTION_BYTECODE_INTERPRETER to be
+ * This option requires `TT_CONFIG_OPTION_BYTECODE_INTERPRETER` to be
* defined.
*
* [1]
@@ -662,9 +664,9 @@ FT_BEGIN_HEADER
/**************************************************************************
*
- * Define TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED to compile the TrueType
- * glyph loader to use Apple's definition of how to handle component
- * offsets in composite glyphs.
+ * Define `TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED` to compile the
+ * TrueType glyph loader to use Apple's definition of how to handle
+ * component offsets in composite glyphs.
*
* Apple and MS disagree on the default behavior of component offsets in
* composites. Apple says that they should be scaled by the scaling
@@ -681,32 +683,33 @@ FT_BEGIN_HEADER
/**************************************************************************
*
- * Define TT_CONFIG_OPTION_GX_VAR_SUPPORT if you want to include support
- * for Apple's distortable font technology (fvar, gvar, cvar, and avar
- * tables). This has many similarities to Type 1 Multiple Masters support.
+ * Define `TT_CONFIG_OPTION_GX_VAR_SUPPORT` if you want to include support
+ * for Apple's distortable font technology (`fvar`, `gvar`, `cvar`, and
+ * `avar` tables). Tagged 'Font Variations', this is now part of OpenType
+ * also. This has many similarities to Type~1 Multiple Masters support.
*/
#define TT_CONFIG_OPTION_GX_VAR_SUPPORT
/**************************************************************************
*
- * Define TT_CONFIG_OPTION_BDF if you want to include support for an
- * embedded 'BDF ' table within SFNT-based bitmap formats.
+ * Define `TT_CONFIG_OPTION_BDF` if you want to include support for an
+ * embedded `BDF ` table within SFNT-based bitmap formats.
*/
#define TT_CONFIG_OPTION_BDF
/**************************************************************************
*
- * Option TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES controls the maximum number
- * of bytecode instructions executed for a single run of the bytecode
- * interpreter, needed to prevent infinite loops. You don't want to change
- * this except for very special situations (e.g., making a library fuzzer
- * spend less time to handle broken fonts).
+ * Option `TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES` controls the maximum
+ * number of bytecode instructions executed for a single run of the
+ * bytecode interpreter, needed to prevent infinite loops. You don't want
+ * to change this except for very special situations (e.g., making a
+ * library fuzzer spend less time to handle broken fonts).
*
* It is not expected that this value is ever modified by a configuring
- * script; instead, it gets surrounded with #ifndef ... #endif so that the
- * value can be set as a preprocessor option on the compiler's command
+ * script; instead, it gets surrounded with `#ifndef ... #endif` so that
+ * the value can be set as a preprocessor option on the compiler's command
* line.
*/
#ifndef TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES
@@ -725,15 +728,15 @@ FT_BEGIN_HEADER
/**************************************************************************
*
- * T1_MAX_DICT_DEPTH is the maximum depth of nest dictionaries and arrays
- * in the Type 1 stream (see t1load.c). A minimum of 4 is required.
+ * `T1_MAX_DICT_DEPTH` is the maximum depth of nest dictionaries and arrays
+ * in the Type~1 stream (see `t1load.c`). A minimum of~4 is required.
*/
#define T1_MAX_DICT_DEPTH 5
/**************************************************************************
*
- * T1_MAX_SUBRS_CALLS details the maximum number of nested sub-routine
+ * `T1_MAX_SUBRS_CALLS` details the maximum number of nested sub-routine
* calls during glyph loading.
*/
#define T1_MAX_SUBRS_CALLS 16
@@ -741,10 +744,11 @@ FT_BEGIN_HEADER
/**************************************************************************
*
- * T1_MAX_CHARSTRING_OPERANDS is the charstring stack's capacity. A
- * minimum of 16 is required.
+ * `T1_MAX_CHARSTRING_OPERANDS` is the charstring stack's capacity. A
+ * minimum of~16 is required.
*
- * The Chinese font MingTiEG-Medium (CNS 11643 character set) needs 256.
+ * The Chinese font 'MingTiEG-Medium' (coverting a CNS 11643 character set)
+ * needs 256.
*/
#define T1_MAX_CHARSTRINGS_OPERANDS 256
@@ -752,9 +756,9 @@ FT_BEGIN_HEADER
/**************************************************************************
*
* Define this configuration macro if you want to prevent the compilation
- * of 't1afm', which is in charge of reading Type 1 AFM files into an
- * existing face. Note that if set, the T1 driver will be unable to
- * produce kerning distances.
+ * of the 't1afm' module, which is in charge of reading Type~1 AFM files
+ * into an existing face. Note that if set, the Type~1 driver will be
+ * unable to produce kerning distances.
*/
#undef T1_CONFIG_OPTION_NO_AFM
@@ -762,17 +766,17 @@ FT_BEGIN_HEADER
/**************************************************************************
*
* Define this configuration macro if you want to prevent the compilation
- * of the Multiple Masters font support in the Type 1 driver.
+ * of the Multiple Masters font support in the Type~1 driver.
*/
#undef T1_CONFIG_OPTION_NO_MM_SUPPORT
/**************************************************************************
*
- * T1_CONFIG_OPTION_OLD_ENGINE controls whether the pre-Adobe Type 1 engine
- * gets compiled into FreeType. If defined, it is possible to switch
- * between the two engines using the 'hinting-engine' property of the type1
- * driver module.
+ * `T1_CONFIG_OPTION_OLD_ENGINE` controls whether the pre-Adobe Type~1
+ * engine gets compiled into FreeType. If defined, it is possible to
+ * switch between the two engines using the `hinting-engine` property of
+ * the 'type1' driver module.
*/
/* #define T1_CONFIG_OPTION_OLD_ENGINE */
@@ -788,10 +792,10 @@ FT_BEGIN_HEADER
/**************************************************************************
*
- * Using CFF_CONFIG_OPTION_DARKENING_PARAMETER_{X,Y}{1,2,3,4} it is
+ * Using `CFF_CONFIG_OPTION_DARKENING_PARAMETER_{X,Y}{1,2,3,4}` it is
* possible to set up the default values of the four control points that
* define the stem darkening behaviour of the (new) CFF engine. For more
- * details please read the documentation of the 'darkening-parameters'
+ * details please read the documentation of the `darkening-parameters`
* property (file `ftdriver.h`), which allows the control at run-time.
*
* Do **not** undefine these macros!
@@ -811,9 +815,9 @@ FT_BEGIN_HEADER
/**************************************************************************
*
- * CFF_CONFIG_OPTION_OLD_ENGINE controls whether the pre-Adobe CFF engine
+ * `CFF_CONFIG_OPTION_OLD_ENGINE` controls whether the pre-Adobe CFF engine
* gets compiled into FreeType. If defined, it is possible to switch
- * between the two engines using the 'hinting-engine' property of the cff
+ * between the two engines using the `hinting-engine` property of the 'cff'
* driver module.
*/
/* #define CFF_CONFIG_OPTION_OLD_ENGINE */
@@ -834,14 +838,14 @@ FT_BEGIN_HEADER
* different, and which have nothing to do with each other. When selecting
* 'Fixed' in KDE or Gnome one gets results that appear rather random, the
* style changes often if one changes the size and one cannot select some
- * fonts at all. This option makes the PCF module prepend the foundry name
- * (plus a space) to the family name.
+ * fonts at all. This option makes the 'pcf' module prepend the foundry
+ * name (plus a space) to the family name.
*
* We also check whether we have 'wide' characters; all put together, we
* get family names like 'Sony Fixed' or 'Misc Fixed Wide'.
*
* If this option is activated, it can be controlled with the
- * 'no-long-family-names' property of the pcf driver module.
+ * `no-long-family-names` property of the 'pcf' driver module.
*/
/* #define PCF_CONFIG_OPTION_LONG_FAMILY_NAMES */
@@ -857,34 +861,39 @@ FT_BEGIN_HEADER
/**************************************************************************
*
- * Compile autofit module with CJK (Chinese, Japanese, Korean) script
+ * Compile 'autofit' module with CJK (Chinese, Japanese, Korean) script
* support.
*/
#define AF_CONFIG_OPTION_CJK
+
/**************************************************************************
*
- * Compile autofit module with fallback Indic script support, covering some
- * scripts that the 'latin' submodule of the autofit module doesn't (yet)
- * handle.
+ * Compile 'autofit' module with fallback Indic script support, covering
+ * some scripts that the 'latin' submodule of the 'autofit' module doesn't
+ * (yet) handle.
*/
#define AF_CONFIG_OPTION_INDIC
+
/**************************************************************************
*
- * Compile autofit module with warp hinting. The idea of the warping code
- * is to slightly scale and shift a glyph within a single dimension so that
- * as much of its segments are aligned (more or less) on the grid. To find
- * out the optimal scaling and shifting value, various parameter
+ * Compile 'autofit' module with warp hinting. The idea of the warping
+ * code is to slightly scale and shift a glyph within a single dimension so
+ * that as much of its segments are aligned (more or less) on the grid. To
+ * find out the optimal scaling and shifting value, various parameter
* combinations are tried and scored.
*
- * This experimental option is active only if the rendering mode is
- * FT_RENDER_MODE_LIGHT; you can switch warping on and off with the
- * 'warping' property of the auto-hinter (see file `ftdriver.h` for more
- * information; by default it is switched off).
+ * You can switch warping on and off with the `warping` property of the
+ * auto-hinter (see file `ftdriver.h` for more information; by default it
+ * is switched off).
+ *
+ * This experimental option is not active if the rendering mode is
+ * `FT_RENDER_MODE_LIGHT`.
*/
#define AF_CONFIG_OPTION_USE_WARPER
+
/**************************************************************************
*
* Use TrueType-like size metrics for 'light' auto-hinting.
@@ -918,8 +927,8 @@ FT_BEGIN_HEADER
/*
- * This macro is defined if native TrueType hinting is requested by the
- * definitions above.
+ * The next three macros are defined if native TrueType hinting is
+ * requested by the definitions above. Don't change this.
*/
#ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER
#define TT_USE_BYTECODE_INTERPRETER
@@ -938,7 +947,7 @@ FT_BEGIN_HEADER
/*
* Check CFF darkening parameters. The checks are the same as in function
- * `cff_property_set' in file `cffdrivr.c'.
+ * `cff_property_set` in file `cffdrivr.c`.
*/
#if CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 < 0 || \
CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 < 0 || \
diff --git a/include/freetype/config/ftstdlib.h
b/include/freetype/config/ftstdlib.h
index a11db25..d988584 100644
--- a/include/freetype/config/ftstdlib.h
+++ b/include/freetype/config/ftstdlib.h
@@ -19,11 +19,11 @@
/**************************************************************************
*
- * This file is used to group all #includes to the ANSI C library that
+ * This file is used to group all `#includes` to the ANSI~C library that
* FreeType normally requires. It also defines macros to rename the
* standard functions within the FreeType source code.
*
- * Load a file which defines FTSTDLIB_H_ before this one to override it.
+ * Load a file which defines `FTSTDLIB_H_` before this one to override it.
*
*/
@@ -37,21 +37,21 @@
#define ft_ptrdiff_t ptrdiff_t
- /***********************************************************************
+ /**************************************************************************
*
* integer limits
*
- * UINT_MAX and ULONG_MAX are used to automatically compute the size of
- * 'int' and 'long' in bytes at compile-time. So far, this works for all
+ * `UINT_MAX` and `ULONG_MAX` are used to automatically compute the size of
+ * `int` and `long` in bytes at compile-time. So far, this works for all
* platforms the library has been tested on.
*
* Note that on the extremely rare platforms that do not provide integer
- * types that are _exactly_ 16 and 32 bits wide (e.g. some old Crays where
- * 'int' is 36 bits), we do not make any guarantee about the correct
- * behaviour of FT2 with all fonts.
+ * types that are _exactly_ 16 and 32~bits wide (e.g., some old Crays where
+ * `int` is 36~bits), we do not make any guarantee about the correct
+ * behaviour of FreeType~2 with all fonts.
*
- * In these case, `ftconfig.h` will refuse to compile anyway with a message
- * like 'couldn't find 32-bit type' or something similar.
+ * In these cases, `ftconfig.h` will refuse to compile anyway with a
+ * message like 'couldn't find 32-bit type' or something similar.
*
*/
@@ -155,16 +155,16 @@
#include <setjmp.h>
-#define ft_jmp_buf jmp_buf /* note: this cannot be a typedef since */
- /* jmp_buf is defined as a macro */
- /* on certain platforms */
+#define ft_jmp_buf jmp_buf /* note: this cannot be a typedef since */
+ /* `jmp_buf` is defined as a macro */
+ /* on certain platforms */
#define ft_longjmp longjmp
#define ft_setjmp( b ) setjmp( *(ft_jmp_buf*) &(b) ) /* same thing here */
- /* the following is only used for debugging purposes, i.e., if */
- /* FT_DEBUG_LEVEL_ERROR or FT_DEBUG_LEVEL_TRACE are defined */
+ /* The following is only used for debugging purposes, i.e., if */
+ /* `FT_DEBUG_LEVEL_ERROR` or `FT_DEBUG_LEVEL_TRACE` are defined. */
#include <stdarg.h>
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [freetype2] master 1061748: include/freettype/config:*.*: Convert comments to Markdown syntax.,
Werner LEMBERG <=