loading cache ./config.cache
checking system version (for dynamic loading)... Linux-2.4.10-64GB-SMP
checking for gcc... (cached) gcc
checking whether the C compiler (gcc  ) works... yes
checking whether the C compiler (gcc  ) is a cross-compiler... no
checking whether we are using GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking finding DBEGIN... got 0x8000000
checking finding CSTACK_ADDRESS... got -1073745272
checking sizeof long long int... yes
checking for getcwd... (cached) yes
checking for getwd... (cached) yes
checking for uname... (cached) yes
checking for gettimeofday... (cached) yes
checking how to run the C preprocessor... (cached) gcc -E
checking for sys/ioctl.h... (cached) yes
checking for BSDgettimeofday... (cached) no
checking for gettimeofday... (cached) yes
checking for gettimeofday declaration... present
checking for sin in -lm... (cached) yes
checking for sockets... checking for connect... (cached) yes
checking for gethostbyname... (cached) yes
checking For network code for nsocket.c... yes
checking check for listen using fcntl... yes
checking for profil... (cached) yes
checking for setenv... (cached) yes
checking for _cleanup... (cached) no
checking FIONBIO vs. O_NONBLOCK for nonblocking I/O... O_NONBLOCK
checking host system type... i686-pc-linux-gnu
host=i686-pc-linux-gnu
checking check for SV_ONSTACK... yes
checking check for SIGSYS... yes
checking check for SIGEMT... no
checking for asm/sigcontext.h... (cached) yes
checking for asm/signal.h... (cached) yes
sigcontext in signal.h
checking for emacs... (cached) /usr/bin/emacs
checking emacs site lisp directory... /usr/share/emacs/20.7/site-lisp
checking emacs default.el... /usr/share/emacs/20.7/site-lisp/default.el
checking emacs info/dir... /usr/share/info/
checking for tcl/tk... checking for tclsh... (cached) tclsh
checking for tclsh8.0... (cached) tclsh
checking for wish... (cached) wish
checking for wish8.0... (cached) wish
checking for main in -llieee... (cached) no
checking for dlopen in -ldl... (cached) yes
not found
enable_machine=
use=386-linux
checking alloca... yes
checking use_gmp=yes, doing configure in gmp directory... loading cache ./config.cache
checking host system type... (cached) pentium3-pc-linux-gnu
checking target system type... (cached) i486-pc-none
checking build system type... (cached) pentium3-pc-linux-gnu
checking for a BSD compatible install... (cached) /usr/bin/install -c
checking whether build environment is sane... yes
checking for mawk... (cached) gawk
checking whether make sets ${MAKE}... (cached) yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for BSD-compatible nm... (cached) /usr/bin/nm -B
checking for gcc... gcc
checking if the C compiler (gcc) works with flags -g -O -fomit-frame-pointer... yes
checking whether gcc accepts -mcpu=i486 -march=i486... yes
checking whether the C compiler (gcc -g -O -fomit-frame-pointer -mcpu=i486 -march=i486  ) works... yes
checking whether the C compiler (gcc -g -O -fomit-frame-pointer -mcpu=i486 -march=i486  ) is a cross-compiler... no
checking whether we are using GNU C... (cached) yes
(cached) checking how to run the C preprocessor... (cached) gcc -E
checking for a BSD compatible install... /usr/bin/install -c
checking whether ln -s works... (cached) yes
checking for suitable m4... (cached) m4
checking for ar... (cached) ar
checking how to switch to text section... (cached) .text
checking how to switch to data section... (cached) .data
checking how to export a symbol... (cached) .globl
checking what assembly label suffix to use... (cached) :
checking how the .type assembly directive should be used... (cached) .type	$1,@$2
checking if the .size assembly directive works... (cached) .size	$1,$2
checking what prefix to use for a local label... (cached) .L
checking how to define a 32-bit word... (cached) .long
checking if symbols are prefixed by underscore... (cached) no
checking if .align assembly directive is logarithmic... (cached) no
checking if the assembler takes cl with shldl... (cached) yes
checking if the .align directive accepts an 0x90 fill in .text... (cached) yes
checking for Cygwin environment... (cached) no
checking for mingw32 environment... (cached) no
checking for EMX OS/2 environment... (cached) no
checking for executable suffix... (cached) no
checking for object suffix... (cached) o
checking build system type... (cached) pentium3-pc-linux-gnu
checking for ld used by GCC... (cached) /usr/i486-suse-linux/bin/ld
checking if the linker (/usr/i486-suse-linux/bin/ld) is GNU ld... (cached) yes
checking for /usr/i486-suse-linux/bin/ld option to reload object files... (cached) -r
checking how to recognise dependant libraries... (cached) file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )
checking for file... (cached) /usr/bin/file
checking for ranlib... (cached) ranlib
checking for strip... (cached) strip
loading cache ./config.cache within ltconfig
checking for objdir... .libs
checking for gcc option to produce PIC... (cached)  -fPIC
checking if gcc PIC flag  -fPIC works... (cached) yes
checking if gcc static flag -static works... (cached) yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.lo... yes
checking if gcc supports -fno-rtti -fno-exceptions ... yes
checking whether the linker (/usr/i486-suse-linux/bin/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... no
checking command to parse /usr/bin/nm -B output... ok
checking if libtool supports shared libraries... no
checking whether to build shared libraries... no
checking whether to build static libraries... yes
creating libtool
loading cache ./config.cache
checking whether optarg is declared... (cached) no
checking for ANSI C header files... (cached) yes
checking for getopt.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/sysctl.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for void... (cached) yes
checking for preprocessor stringizing operator... (cached) yes
checking for getopt_long... (cached) yes
checking for getpagesize... (cached) yes
checking for popen... (cached) yes
checking for processor_info... (cached) no
checking for strtoul... (cached) yes
checking for sysconf... (cached) yes
checking for sysctlbyname... (cached) no
checking if ansi2knr should be used... (cached) no
creating config.m4
creating ./config.status
creating Makefile
creating mpf/Makefile
creating mpz/Makefile
creating mpn/Makefile
creating mpq/Makefile
creating mpf/tests/Makefile
creating mpz/tests/Makefile
creating mpq/tests/Makefile
creating mpn/tests/Makefile
creating tests/Makefile
creating tests/rand/Makefile
creating demos/Makefile
creating tune/Makefile
creating mpbsd/Makefile
creating mpbsd/tests/Makefile
creating mpfr/Makefile
creating mpfr/tests/Makefile
creating config.h
config.h is unchanged
linking ./mpn/x86/udiv.asm to mpn/udiv.asm
linking ./mpn/x86/umul.asm to mpn/umul.asm
linking ./mpn/generic/inlines.c to mpn/inlines.c
linking ./mpn/x86/aors_n.asm to mpn/add_n.asm
linking ./mpn/x86/aors_n.asm to mpn/sub_n.asm
linking ./mpn/x86/mul_1.asm to mpn/mul_1.asm
linking ./mpn/x86/aorsmul_1.asm to mpn/addmul_1.asm
linking ./mpn/x86/aorsmul_1.asm to mpn/submul_1.asm
linking ./mpn/x86/lshift.asm to mpn/lshift.asm
linking ./mpn/x86/rshift.asm to mpn/rshift.asm
linking ./mpn/x86/diveby3.asm to mpn/diveby3.asm
linking ./mpn/generic/divrem.c to mpn/divrem.c
linking ./mpn/x86/divrem_1.asm to mpn/divrem_1.asm
linking ./mpn/generic/divrem_2.c to mpn/divrem_2.c
linking ./mpn/x86/mod_1.asm to mpn/mod_1.asm
linking ./mpn/generic/mod_1_rs.c to mpn/mod_1_rs.c
linking ./mpn/generic/pre_mod_1.c to mpn/pre_mod_1.c
linking ./mpn/generic/dump.c to mpn/dump.c
linking ./mpn/generic/mul.c to mpn/mul.c
linking ./mpn/generic/mul_fft.c to mpn/mul_fft.c
linking ./mpn/generic/mul_n.c to mpn/mul_n.c
linking ./mpn/x86/mul_basecase.asm to mpn/mul_basecase.asm
linking ./mpn/generic/sqr_basecase.c to mpn/sqr_basecase.c
linking ./mpn/generic/random.c to mpn/random.c
linking ./mpn/generic/random2.c to mpn/random2.c
linking ./mpn/generic/sqrtrem.c to mpn/sqrtrem.c
linking ./mpn/generic/get_str.c to mpn/get_str.c
linking ./mpn/generic/set_str.c to mpn/set_str.c
linking ./mpn/generic/scan0.c to mpn/scan0.c
linking ./mpn/generic/scan1.c to mpn/scan1.c
linking ./mpn/generic/popcount.c to mpn/popcount.c
linking ./mpn/generic/hamdist.c to mpn/hamdist.c
linking ./mpn/generic/cmp.c to mpn/cmp.c
linking ./mpn/generic/perfsqr.c to mpn/perfsqr.c
linking ./mpn/generic/bdivmod.c to mpn/bdivmod.c
linking ./mpn/generic/gcd_1.c to mpn/gcd_1.c
linking ./mpn/generic/gcd.c to mpn/gcd.c
linking ./mpn/generic/gcdext.c to mpn/gcdext.c
linking ./mpn/generic/tdiv_qr.c to mpn/tdiv_qr.c
linking ./mpn/generic/bz_divrem_n.c to mpn/bz_divrem_n.c
linking ./mpn/generic/sb_divrem_mn.c to mpn/sb_divrem_mn.c
linking ./mpn/generic/jacbase.c to mpn/jacbase.c
linking ./mpn/x86/copyi.asm to mpn/copyi.asm
linking ./mpn/x86/copyd.asm to mpn/copyd.asm
linking ./mpn/generic/gmp-mparam.h to gmp-mparam.h
checking Checking for buggy gcc version from redhat... no
creating ./config.status
creating makedefc
creating h/gclincl.h
h/gclincl.h is unchanged
makedefc

# begin makedefs

# use=386-linux

# for main link of raw_gcl
LIBS= -lm

#The multi precision library stuff
MPFILES=$(MPDIR)/mpi-386_no_under.o $(MPDIR)/libmport.a


# root for the installation, eg /usr/local
# This would cause make install to create /usr/local/bin/gcl and
# /usr/local/lib/gcl-2-??/* with some basic files.
prefix=/usr/local

# where to place the info files
INFO_DIR=/usr/share/info/

# where to put emacs lisp files.
EMACS_SITE_LISP=/usr/share/emacs/20.7/site-lisp

# the default.el file
EMACS_DEFAULT_EL=/usr/share/emacs/20.7/site-lisp/default.el

# numerous TCL/TK variables culled from the tkConfig.sh and tclConfig.sh
# if these are found.
TK_CONFIG_PREFIX=
TK_LIBRARY=
TCL_LIBRARY=
TK_XINCLUDES=
TK_INCLUDE=
TCL_INCLUDE=
TK_LIB_SPEC=
TK_BUILD_LIB_SPEC=
TK_XLIBSW=
TK_XINCLUDES=
TCL_LIB_SPEC=
TCL_DL_LIBS=
TCL_LIBS=

NOTIFY=yes
GCC=gcc





add-defs1 386-linux
make: `file-sub' is up to date.
using 386-linux.defs
inserting h/386-linux.defs in ..
 makefile,
 unixport/make_kcn,
 bin/makefile,
 clcs/makefile,
 cmpnew/makefile,
 comp/makefile,
 doc/makefile,
 dos/makefile,
 elisp/makefile,
 gcl-tk/makefile,
 go/makefile,
 info/makefile,
 lsp/makefile,
 mp/makefile,
 o/makefile,
 unixport/makefile,