Re: [Axiom-developer] Issue to build GCL on Mandrake linux distro (was: Re: [Gcl-devel] Re: Free and Open Source Axiom exists)

[Camm Maguire]

Greetings!

Suggestion: --disable-statsysbfd --enable-locbfd

I suspect something wrong with the detection of the system bfd library
paths. 

Take care,

David MENTRE <address@hidden> writes:

> Hello Paul
> 
> I'm CC:-ing gcl-devel@ as your issue looks more a GCL issue than an
> Axiom one: GCL is not yet compiled. ;)
> 
> Looking at your build, you have those strange warnings:
> > sed: file /tmp/csMec4jd/subs-1.sed line 32: Unterminated `s' command
> > config.status: creating windows/gcl.iss
> > sed: file /tmp/csMec4jd/subs-1.sed line 32: Unterminated `s' command
> > config.status: creating windows/gcl.ansi.iss
> > sed: file /tmp/csMec4jd/subs-1.sed line 32: Unterminated `s' command
> > config.status: creating windows/install.ansi.lsp
> > sed: file /tmp/csMec4jd/subs-1.sed line 32: Unterminated `s' command
> > config.status: creating windows/install.lsp
> > sed: file /tmp/csMec4jd/subs-1.sed line 32: Unterminated `s' command
> > config.status: creating h/gclincl.h
> 
> It might be the culprit. I've check in my own logs and I don't have such
> warnings. What is the version of sed used on the Mandrake (sed
> --version)? 
> 
> Could you get a copy of the file /tmp/csMec4jd/subs-1.sed?
> 
> Yours,
> d.
> 
> address@hidden (Paul Zimmermann) writes:
> 
> >    From: David MENTRE <address@hidden>
> >    Date: Mon, 17 Nov 2003 22:27:01 +0100
> >
> >    Hello Paul,
> >
> >    address@hidden (Paul Zimmermann) writes:
> >
> >    >    On the laptop it appears you need libbfd.a
> >    >
> >    > I have libbfd, but only a dynamic library:
> >
> >    Thanks to friend in our local LUG, I have the following answers:
> >
> >     - you'll find libbfd.a and libiberty.a in "libbinutils2-devel" packages;
> >
> > Thanks David. I installed libbinutils2-devel-2.13.90.0.18-3mdk.i586.rpm
> > and now I can go a little further in the "make" (complete log below):
> >
> > % make
> > ...
> > make[4]: Leaving directory `/var/tmp/axiom/lsp/gcl-2.6.1'
> > (cd xbin ; cp ../bin/gcl .)
> > cd cmpnew && make gcl_collectfn.o
> > make[4]: Entering directory `/var/tmp/axiom/lsp/gcl-2.6.1/cmpnew'
> > ../unixport/saved_pre_gcl ../unixport/ -compile gcl_collectfn.lsp
> > make[4]: ../unixport/saved_pre_gcl: Command not found
> > make[4]: *** [gcl_collectfn.o] Error 127
> > make[4]: Leaving directory `/var/tmp/axiom/lsp/gcl-2.6.1/cmpnew'
> > make[3]: *** [cmpnew/gcl_collectfn.o] Error 2
> > make[3]: Leaving directory `/var/tmp/axiom/lsp/gcl-2.6.1'
> > cp: cannot stat `unixport/saved_gcl': No such file or directory
> > make[2]: *** [gcldir] Error 1
> > make[2]: Leaving directory `/var/tmp/axiom/lsp'
> > make[1]: *** [lspdir] Error 2
> > make[1]: Leaving directory `/var/tmp/axiom'
> > make: *** [all] Error 2
> >
> > Any idea why the saved_pre_gcl command was not created?
> >
> > Regards,
> > Paul
> >
> > ##############################################################################
> >
> > Script started on Tue Nov 18 12:01:37 2003
> > norroy% make
> > 13 making noweb
> > patching file modules.c
> > mnt.o: In function `emitfile':
> > mnt.o(.text+0x361): the use of `tmpnam' is dangerous, better use `mkstemp'
> > make[1]: [install-shell] Error 1 (ignored)
> > make[1]: [install-code] Error 1 (ignored)
> > texhash: /usr/share/texmf: directory not writable. Skipping...
> > rm: cannot remove `/var/lib/texmf/ls-R': Operation not permitted
> > mv: cannot move `/var/lib/texmf/lsR.H7KG8J/lsR23236.tmp' to 
> > `/var/lib/texmf/ls-R': Operation not permitted
> > make[1]: [install-elisp] Error 1 (ignored)
> > 0 SPAD=/var/tmp/axiom/mnt/linux SYS=linux SPD=/var/tmp/axiom 
> > LSP=/var/tmp/axiom/lsp GCLDIR=/var/tmp/axiom/lsp/gcl-2.6.1 
> > SRC=/var/tmp/axiom/src INT=/var/tmp/axiom/int OBJ=/var/tmp/axiom/obj 
> > MNT=/var/tmp/axiom/mnt ZIPS=/var/tmp/axiom/zips TMP=/var/tmp/axiom/obj/tmp 
> > SPADBIN=/var/tmp/axiom/mnt/linux/bin INC=/var/tmp/axiom/src/include 
> > CCLBASE=/var/tmp/axiom/obj/linux/ccl/ccllisp PART=cprogs SUBPART=everything 
> > NOISE=-o /var/tmp/axiom/obj/tmp/trace GCLVERSION=gcl-2.6.1 
> > TANGLE=/var/tmp/axiom/mnt/linux/bin/lib/notangle
> > 10 copying /var/tmp/axiom/src/scripts to /var/tmp/axiom/mnt/linux/bin
> > 1 making a linux system, PART=cprogs SUBPART=everything
> > 2 Environment SPAD=/var/tmp/axiom/mnt/linux SYS=linux SPD=/var/tmp/axiom 
> > LSP=/var/tmp/axiom/lsp GCLDIR=/var/tmp/axiom/lsp/gcl-2.6.1 
> > SRC=/var/tmp/axiom/src INT=/var/tmp/axiom/int OBJ=/var/tmp/axiom/obj 
> > MNT=/var/tmp/axiom/mnt ZIPS=/var/tmp/axiom/zips TMP=/var/tmp/axiom/obj/tmp 
> > SPADBIN=/var/tmp/axiom/mnt/linux/bin INC=/var/tmp/axiom/src/include 
> > CCLBASE=/var/tmp/axiom/obj/linux/ccl/ccllisp PART=cprogs SUBPART=everything 
> > NOISE=-o /var/tmp/axiom/obj/tmp/trace GCLVERSION=gcl-2.6.1 
> > TANGLE=/var/tmp/axiom/mnt/linux/bin/lib/notangle
> > make[1]: Entering directory `/var/tmp/axiom'
> > 11 checking directory structure
> > 12 Environment: PLF=LINUXplatform CCF=-O2 -fno-strength-reduce -Wall 
> > -D_GNU_SOURCE -DLINUXplatform -I/usr/X11/include LDF=-L/usr/X11R6/lib 
> > CC=gcc AWK=gawk RANLIB=ranlib TOUCH=touch TAR=tar 
> > AXIOMXLROOT=/var/tmp/axiom/mnt/linux/compiler O=o BYE=bye LISP=lsp 
> > DAASE=/var/tmp/axiom/src/share XLIB=/usr/X11R6/lib
> > 18 making /var/tmp/axiom/src
> > make[2]: Entering directory `/var/tmp/axiom/src'
> > 1 making /var/tmp/axiom/src/scripts
> > make[3]: Entering directory `/var/tmp/axiom/src/scripts'
> > 1 making /var/tmp/axiom/src/scripts
> > make[3]: Leaving directory `/var/tmp/axiom/src/scripts'
> > 17 making /var/tmp/axiom/src/lib
> > make[3]: Entering directory `/var/tmp/axiom/src/lib'
> > 1 making /var/tmp/axiom/int/lib/bsdsignal.c from 
> > /var/tmp/axiom/src/lib/bsdsignal.c.pamphlet
> > 2 making /var/tmp/axiom/obj/linux/lib/bsdsignal.o from 
> > /var/tmp/axiom/int/lib/bsdsignal.c
> > 9 making /var/tmp/axiom/int/lib/cursor.c from 
> > /var/tmp/axiom/src/lib/cursor.c.pamphlet
> > 10 making /var/tmp/axiom/obj/linux/lib/cursor.o from 
> > /var/tmp/axiom/int/lib/cursor.c
> > 13 making /var/tmp/axiom/int/lib/edin.c from 
> > /var/tmp/axiom/src/lib/edin.c.pamphlet
> > 14 making /var/tmp/axiom/obj/linux/lib/edin.o from 
> > /var/tmp/axiom/int/lib/edin.c
> > 17 making /var/tmp/axiom/int/lib/fnct_key.c from 
> > /var/tmp/axiom/src/lib/fnct_key.c.pamphlet
> > 18 making /var/tmp/axiom/obj/linux/lib/fnct_key.o from 
> > /var/tmp/axiom/int/lib/fnct_key.c
> > 21 making /var/tmp/axiom/int/lib/halloc.c from 
> > /var/tmp/axiom/src/lib/halloc.c.pamphlet
> > 22 making /var/tmp/axiom/obj/linux/lib/halloc.o from 
> > /var/tmp/axiom/int/lib/halloc.c
> > 29 making /var/tmp/axiom/int/lib/openpty.c from 
> > /var/tmp/axiom/src/lib/openpty.c.pamphlet
> > 30 making /var/tmp/axiom/obj/linux/lib/openpty.o from 
> > /var/tmp/axiom/int/lib/openpty.c
> > 33 making /var/tmp/axiom/int/lib/pixmap.c from 
> > /var/tmp/axiom/src/lib/pixmap.c.pamphlet
> > 34 making /var/tmp/axiom/obj/linux/lib/pixmap.o from 
> > /var/tmp/axiom/int/lib/pixmap.c
> > 37 making /var/tmp/axiom/int/lib/prt.c from 
> > /var/tmp/axiom/src/lib/prt.c.pamphlet
> > 38 making /var/tmp/axiom/obj/linux/lib/prt.o from 
> > /var/tmp/axiom/int/lib/prt.c
> > 41 making /var/tmp/axiom/int/lib/sockio-c.c from 
> > /var/tmp/axiom/src/lib/sockio-c.c.pamphlet
> > 42 making /var/tmp/axiom/obj/linux/lib/sockio-c.o from 
> > /var/tmp/axiom/int/lib/sockio-c.c
> > 45 making /var/tmp/axiom/int/lib/spadcolors.c from 
> > /var/tmp/axiom/src/lib/spadcolors.c.pamphlet
> > 46 making /var/tmp/axiom/obj/linux/lib/spadcolors.o from 
> > /var/tmp/axiom/int/lib/spadcolors.c
> > 49 making /var/tmp/axiom/int/lib/util.c from 
> > /var/tmp/axiom/src/lib/util.c.pamphlet
> > 50 making /var/tmp/axiom/obj/linux/lib/util.o from 
> > /var/tmp/axiom/int/lib/util.c
> > 53 making /var/tmp/axiom/int/lib/wct.c from 
> > /var/tmp/axiom/src/lib/wct.c.pamphlet
> > 54 making /var/tmp/axiom/obj/linux/lib/wct.o from 
> > /var/tmp/axiom/int/lib/wct.c
> > 57 making /var/tmp/axiom/int/lib/XDither.c from 
> > /var/tmp/axiom/src/lib/XDither.c.pamphlet
> > 58 making /var/tmp/axiom/obj/linux/lib/XDither.o from 
> > /var/tmp/axiom/int/lib/XDither.c
> > 61 making /var/tmp/axiom/int/lib/XShade.c from 
> > /var/tmp/axiom/src/lib/XShade.c.pamphlet
> > 62 making /var/tmp/axiom/obj/linux/lib/XShade.o from 
> > /var/tmp/axiom/int/lib/XShade.c
> > 65 making /var/tmp/axiom/int/lib/XSpadFill.c from 
> > /var/tmp/axiom/src/lib/XSpadFill.c.pamphlet
> > 66 making /var/tmp/axiom/obj/linux/lib/XSpadFill.o from 
> > /var/tmp/axiom/int/lib/XSpadFill.c
> > 73 making /var/tmp/axiom/obj/linux/lib/libspad.a
> > 5 making /var/tmp/axiom/int/lib/cfuns-c.c from 
> > /var/tmp/axiom/src/lib/cfuns-c.c.pamphlet
> > 6 making /var/tmp/axiom/obj/linux/lib/cfuns-c.o from 
> > /var/tmp/axiom/int/lib/cfuns-c.c
> > 25 making /var/tmp/axiom/int/lib/hash.c from 
> > /var/tmp/axiom/src/lib/hash.c.pamphlet
> > 26 making /var/tmp/axiom/obj/linux/lib/hash.o from 
> > /var/tmp/axiom/int/lib/hash.c
> > 3 making /var/tmp/axiom/int/doc/src/lib/bsdsignal.c.dvi from 
> > /var/tmp/axiom/src/lib/bsdsignal.c.pamphlet
> > 4 making /var/tmp/axiom/mnt/linux/doc/src/lib/bsdsignal.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/bsdsignal.c.dvi
> > 7 making /var/tmp/axiom/int/doc/src/lib/cfuns-c.c.dvi from 
> > /var/tmp/axiom/src/lib/cfuns-c.c.pamphlet
> > 8 making /var/tmp/axiom/mnt/linux/doc/src/lib/cfuns-c.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/cfuns-c.c.dvi
> > 11 making /var/tmp/axiom/int/doc/src/lib/cursor.c.dvi from 
> > /var/tmp/axiom/src/lib/cursor.c.pamphlet
> > 12 making /var/tmp/axiom/mnt/linux/doc/src/lib/cursor.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/cursor.c.dvi
> > 15 making /var/tmp/axiom/int/doc/src/lib/edin.c.dvi from 
> > /var/tmp/axiom/src/lib/edin.c.pamphlet
> > 16 making /var/tmp/axiom/mnt/linux/doc/src/lib/edin.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/edin.c.dvi
> > 19 making /var/tmp/axiom/int/doc/src/lib/fnct_key.c.dvi from 
> > /var/tmp/axiom/src/lib/fnct_key.c.pamphlet
> > 20 making /var/tmp/axiom/mnt/linux/doc/src/lib/fnct_key.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/fnct_key.c.dvi
> > 23 making /var/tmp/axiom/int/doc/src/lib/halloc.c.dvi from 
> > /var/tmp/axiom/src/lib/halloc.c.pamphlet
> > 24 making /var/tmp/axiom/mnt/linux/doc/src/lib/halloc.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/halloc.c.dvi
> > 27 making /var/tmp/axiom/int/doc/src/lib/hash.c.dvi from 
> > /var/tmp/axiom/src/lib/hash.c.pamphlet
> > 28 making /var/tmp/axiom/mnt/linux/doc/src/lib/hash.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/hash.c.dvi
> > 31 making /var/tmp/axiom/int/doc/src/lib/openpty.c.dvi from 
> > /var/tmp/axiom/src/lib/openpty.c.pamphlet
> > 32 making /var/tmp/axiom/mnt/linux/doc/src/lib/openpty.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/openpty.c.dvi
> > 35 making /var/tmp/axiom/int/doc/src/lib/pixmap.c.dvi from 
> > /var/tmp/axiom/src/lib/pixmap.c.pamphlet
> > 36 making /var/tmp/axiom/mnt/linux/doc/src/lib/pixmap.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/pixmap.c.dvi
> > 39 making /var/tmp/axiom/int/doc/src/lib/prt.c.dvi from 
> > /var/tmp/axiom/src/lib/prt.c.pamphlet
> > 40 making /var/tmp/axiom/mnt/linux/doc/src/lib/prt.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/prt.c.dvi
> > 43 making /var/tmp/axiom/int/doc/src/lib/sockio-c.c.dvi from 
> > /var/tmp/axiom/src/lib/sockio-c.c.pamphlet
> > 44 making /var/tmp/axiom/mnt/linux/doc/src/lib/sockio-c.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/sockio-c.c.dvi
> > 71 making /var/tmp/axiom/mnt/linux/doc/src/lib/Makefile.dvi from 
> > /var/tmp/axiom/src/lib/Makefile.dvi
> > 47 making /var/tmp/axiom/int/doc/src/lib/spadcolors.c.dvi from 
> > /var/tmp/axiom/src/lib/spadcolors.c.pamphlet
> > 48 making /var/tmp/axiom/mnt/linux/doc/src/lib/spadcolors.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/spadcolors.c.dvi
> > 51 making /var/tmp/axiom/int/doc/src/lib/util.c.dvi from 
> > /var/tmp/axiom/src/lib/util.c.pamphlet
> > 52 making /var/tmp/axiom/mnt/linux/doc/src/lib/util.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/util.c.dvi
> > 55 making /var/tmp/axiom/int/doc/src/lib/wct.c.dvi from 
> > /var/tmp/axiom/src/lib/wct.c.pamphlet
> > 56 making /var/tmp/axiom/mnt/linux/doc/src/lib/wct.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/wct.c.dvi
> > 59 making /var/tmp/axiom/int/doc/src/lib/XDither.c.dvi from 
> > /var/tmp/axiom/src/lib/XDither.c.pamphlet
> > 60 making /var/tmp/axiom/mnt/linux/doc/src/lib/XDither.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/XDither.c.dvi
> > 63 making /var/tmp/axiom/int/doc/src/lib/XShade.c.dvi from 
> > /var/tmp/axiom/src/lib/XShade.c.pamphlet
> > 64 making /var/tmp/axiom/mnt/linux/doc/src/lib/XShade.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/XShade.c.dvi
> > 67 making /var/tmp/axiom/int/doc/src/lib/XSpadFill.c.dvi from 
> > /var/tmp/axiom/src/lib/XSpadFill.c.pamphlet
> > 68 making /var/tmp/axiom/mnt/linux/doc/src/lib/XSpadFill.c.dvi from 
> > /var/tmp/axiom/int/doc/src/lib/XSpadFill.c.dvi
> > 72 finished making /var/tmp/axiom/obj/linux/lib/libspad.a 
> > /var/tmp/axiom/obj/linux/lib/cfuns-c.o /var/tmp/axiom/obj/linux/lib/hash.o
> > make[3]: Leaving directory `/var/tmp/axiom/src/lib'
> > make[2]: Leaving directory `/var/tmp/axiom/src'
> > 0 PLF=LINUXplatform CCF=-O2 -fno-strength-reduce -Wall -D_GNU_SOURCE 
> > -DLINUXplatform -I/usr/X11/include LDF=-L/usr/X11R6/lib CC=gcc AWK=gawk 
> > RANLIB=ranlib TOUCH=touch TAR=tar 
> > AXIOMXLROOT=/var/tmp/axiom/mnt/linux/compiler O=o BYE=bye LISP=lsp 
> > DAASE=/var/tmp/axiom/src/share XLIB=/usr/X11R6/lib
> > 10 copying /var/tmp/axiom/src/scripts to /var/tmp/axiom/mnt/linux/bin
> > 19 making /var/tmp/axiom/lsp
> > make[2]: Entering directory `/var/tmp/axiom/lsp'
> > 2 building gcl-2.6.1
> > 3 applying EXTRAS patch to h/linux.defs
> > patching file linux.defs
> > 4 setup ini files for EXTRAS patch
> > 6 applying libspad.a patch to unixport/makefile
> > patching file makefile
> > 7 applying toploop patch to unixport/init_gcl.lsp
> > patching file init_gcl.lsp.in
> > 18 applying MAX_STACK_SIZE patch
> > patching file main.c
> > 11 applying tail-recursive noise patch
> > patching file gcl_cmpflet.lsp
> > 12 applying tail-recursive noise patch
> > patching file gcl_cmpcall.lsp
> > 26 copy gcl_collectfn.lsp to collectfn.lsp
> > checking build system type... i686-pc-linux-gnu
> > checking host system type... i686-pc-linux-gnu
> > host=i686-pc-linux-gnu
> > enable_machine=
> > use=386-linux
> > checking for gcc... gcc
> > checking for C compiler default output... a.out
> > checking whether the C compiler works... yes
> > checking whether we are cross compiling... no
> > checking for suffix of executables... 
> > checking for suffix of object files... o
> > checking whether we are using the GNU C compiler... yes
> > checking whether gcc accepts -g... yes
> > checking how to run the C preprocessor... gcc -E
> > checking for gawk... gawk
> > checking system version (for dynamic loading)... checking for makeinfo... 
> > makeinfo
> > Linux-2.4.20
> > checking use_gmp=yes, doing configure in gmp directory... 
> > #
> > #
> > # -------------------
> > # Subconfigure of GMP
> > #
> > #
> > configure: WARNING: If you wanted to set the --build type, don't use --host.
> >     If a cross compiler is detected then cross compile mode will be used.
> > checking build system type... athlon-pc-linux-gnu
> > checking host system type... i686-pc-linux-gnu
> > checking for a BSD compatible install... /usr/bin/install -c
> > checking whether build environment is sane... yes
> > checking for mawk... gawk
> > checking whether make sets ${MAKE}... yes
> > checking whether to enable maintainer-specific portions of Makefiles... no
> > checking compiler gcc -g -O2 -fomit-frame-pointer ... yes
> > checking compiler gcc -g -O2 -fomit-frame-pointer  -mcpu=pentiumpro... yes
> > checking whether gcc -march=pentiumpro is good... configure: WARNING: 
> > unrecognised gcc version string: gcc (GCC) 3.2 (Mandrake Linux 9.0 3.2-1mdk)
> > Copyright (C) 2002 Free Software Foundation, Inc.
> > This is free software; see the source for copying conditions.  There is NO
> > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> > no
> > checking compiler gcc -g -O2 -fomit-frame-pointer -mcpu=pentiumpro  
> > -march=i486... yes
> > checking for i686-pc-linux-gnu-gcc... gcc
> > checking for C compiler default output... a.out
> > checking whether the C compiler works... yes
> > checking whether we are cross compiling... no
> > checking for executable suffix... 
> > checking for object suffix... o
> > checking whether we are using the GNU C compiler... yes
> > checking whether gcc accepts -g... yes
> > checking for style of include used by make... GNU
> > checking dependency style of gcc... none
> > checking for gcc option to accept ANSI C... none needed
> > checking how to run the C preprocessor... gcc -E
> > using ABI="standard"
> >       CC="gcc"
> >       CFLAGS="-g -O2 -fomit-frame-pointer -mcpu=pentiumpro -march=i486"
> >       CPPFLAGS=""
> > checking for gcc option to accept ANSI C... none needed
> > checking for function prototypes... yes
> > checking for ANSI C header files... yes
> > checking for string.h... yes
> > checking for i686-pc-linux-gnu-ar... no
> > checking for ar... ar
> > checking for BSD-compatible nm... nm
> > checking for ld used by GCC... /usr/bin/ld
> > checking if the linker (/usr/bin/ld) is GNU ld... yes
> > checking for /usr/bin/ld option to reload object files... -r
> > checking whether ln -s works... yes
> > checking how to recognise dependant libraries... pass_all
> > checking for dlfcn.h... yes
> > checking the maximum length of command line arguments... 49153
> > checking command to parse nm output from gcc object... ok
> > checking for objdir... .libs
> > checking for i686-pc-linux-gnu-ranlib... ranlib
> > checking for i686-pc-linux-gnu-strip... no
> > checking for strip... strip
> > checking if gcc static flag  works... yes
> > checking if gcc supports -fno-rtti -fno-exceptions... yes
> > checking for gcc option to produce PIC... -fPIC
> > checking if gcc PIC flag -fPIC works... yes
> > checking if gcc supports -c -o file.o... yes
> > checking whether the gcc linker (/usr/bin/ld) supports shared libraries... 
> > yes
> > checking whether -lc should be explicitly linked in... no
> > checking how to hardcode library paths into programs... immediate
> > checking whether stripping libraries is possible... yes
> > checking dynamic linker characteristics... GNU/Linux ld.so
> > checking if libtool supports shared libraries... yes
> > checking whether to build shared libraries... yes
> > checking whether to build static libraries... yes
> > configure: creating libtool
> > checking for ANSI C header files... (cached) yes
> > checking whether time.h and sys/time.h may both be included... yes
> > checking for locale.h... yes
> > checking for sys/mman.h... yes
> > checking for sys/param.h... yes
> > checking for sys/processor.h... no
> > checking for sys/resource.h... yes
> > checking for sys/sysctl.h... yes
> > checking for sys/systemcfg.h... no
> > checking for sys/time.h... yes
> > checking for sys/times.h... yes
> > checking for sys/types.h... yes
> > checking for sys/stat.h... yes
> > checking for stdlib.h... yes
> > checking for string.h... (cached) yes
> > checking for memory.h... yes
> > checking for strings.h... yes
> > checking for inttypes.h... yes
> > checking for stdint.h... yes
> > checking for unistd.h... yes
> > checking whether fgetc is declared... yes
> > checking whether fscanf is declared... yes
> > checking whether optarg is declared... yes
> > checking whether ungetc is declared... yes
> > checking whether vfprintf is declared... yes
> > checking return type of signal handlers... void
> > checking for intmax_t... yes
> > checking for long double... yes
> > checking for long long... yes
> > checking for ptrdiff_t... yes
> > checking for quad_t... yes
> > checking for preprocessor stringizing operator... yes
> > checking whether <stdarg.h> exists and works... yes
> > checking whether gcc __attribute__ ((const)) works... yes
> > checking whether gcc __attribute__ ((malloc)) works... yes
> > checking whether gcc __attribute__ ((mode (XX))) works... yes
> > checking whether gcc __attribute__ ((noreturn)) works... yes
> > checking for inline... inline
> > checking for main in -lm... yes
> > checking for working alloca.h... yes
> > checking for alloca (via gmp-impl.h)... yes
> > checking how to allocate temporary memory... alloca
> > checking for alarm... yes
> > checking for getpagesize... yes
> > checking for getrusage... yes
> > checking for gettimeofday... yes
> > checking for localeconv... yes
> > checking for memset... yes
> > checking for mmap... yes
> > checking for mprotect... yes
> > checking for obstack_vprintf... yes
> > checking for popen... yes
> > checking for processor_info... no
> > checking for read_real_time... no
> > checking for strchr... yes
> > checking for strnlen... yes
> > checking for strtoul... yes
> > checking for sysconf... yes
> > checking for sysctl... yes
> > checking for sysctlbyname... no
> > checking for times... yes
> > checking for vsnprintf... yes
> > checking whether vsnprintf works... yes
> > checking whether sscanf needs writable input... no
> > checking for suitable m4... m4
> > checking if m4wrap produces spurious output... no
> > checking how to switch to text section... .text
> > checking how to switch to data section... .data
> > checking what assembly label suffix to use... :
> > checking how to export a symbol... .globl
> > checking if globals are prefixed by underscore... no
> > checking how to switch to read-only data section...         .section        
> > .rodata
> > checking if the export directive needs an attribute... 
> > checking for assembler .type directive... .type     $1,@$2
> > checking for assembler .size directive... .size     $1,$2
> > checking what prefix to use for a local label... .L
> > checking how to define a 32-bit word... .long
> > checking if .align assembly directive is logarithmic... no
> > checking if the .align directive accepts an 0x90 fill in .text... yes
> > checking if the assembler takes cl with shldl... yes
> > creating config.m4
> > configure: creating ./config.status
> > config.status: creating Makefile
> > config.status: creating mpbsd/Makefile
> > config.status: creating mpf/Makefile
> > config.status: creating mpn/Makefile
> > config.status: creating mpq/Makefile
> > config.status: creating mpz/Makefile
> > config.status: creating printf/Makefile
> > config.status: creating scanf/Makefile
> > config.status: creating cxx/Makefile
> > config.status: creating tests/Makefile
> > config.status: creating tests/devel/Makefile
> > config.status: creating tests/mpbsd/Makefile
> > config.status: creating tests/mpf/Makefile
> > config.status: creating tests/mpn/Makefile
> > config.status: creating tests/mpq/Makefile
> > config.status: creating tests/mpz/Makefile
> > config.status: creating tests/rand/Makefile
> > config.status: creating tests/misc/Makefile
> > config.status: creating tests/cxx/Makefile
> > config.status: creating tune/Makefile
> > config.status: creating demos/Makefile
> > config.status: creating demos/calc/Makefile
> > config.status: creating demos/expr/Makefile
> > config.status: creating gmp.h
> > config.status: creating mp.h
> > config.status: creating demos/expr/expr-impl.h
> > config.status: creating config.h
> > config.status: linking ./mpn/x86/udiv.asm to mpn/udiv.asm
> > config.status: linking ./mpn/x86/umul.asm to mpn/umul.asm
> > config.status: linking ./mpn/generic/add.c to mpn/add.c
> > config.status: linking ./mpn/generic/add_1.c to mpn/add_1.c
> > config.status: linking ./mpn/x86/aors_n.asm to mpn/add_n.asm
> > config.status: linking ./mpn/generic/sub.c to mpn/sub.c
> > config.status: linking ./mpn/generic/sub_1.c to mpn/sub_1.c
> > config.status: linking ./mpn/x86/aors_n.asm to mpn/sub_n.asm
> > config.status: linking ./mpn/x86/mul_1.asm to mpn/mul_1.asm
> > config.status: linking ./mpn/x86/p6/aorsmul_1.asm to mpn/addmul_1.asm
> > config.status: linking ./mpn/x86/p6/aorsmul_1.asm to mpn/submul_1.asm
> > config.status: linking ./mpn/x86/lshift.asm to mpn/lshift.asm
> > config.status: linking ./mpn/x86/rshift.asm to mpn/rshift.asm
> > config.status: linking ./mpn/x86/p6/dive_1.asm to mpn/dive_1.asm
> > config.status: linking ./mpn/x86/p6/diveby3.asm to mpn/diveby3.asm
> > config.status: linking ./mpn/generic/divis.c to mpn/divis.c
> > config.status: linking ./mpn/generic/divrem.c to mpn/divrem.c
> > config.status: linking ./mpn/x86/divrem_1.asm to mpn/divrem_1.asm
> > config.status: linking ./mpn/generic/divrem_2.c to mpn/divrem_2.c
> > config.status: linking ./mpn/generic/fib2_ui.c to mpn/fib2_ui.c
> > config.status: linking ./mpn/x86/p6/mod_1.asm to mpn/mod_1.asm
> > config.status: linking ./mpn/x86/mod_34lsub1.asm to mpn/mod_34lsub1.asm
> > config.status: linking ./mpn/x86/p6/mode1o.asm to mpn/mode1o.asm
> > config.status: linking ./mpn/generic/dump.c to mpn/dump.c
> > config.status: linking ./mpn/generic/mul.c to mpn/mul.c
> > config.status: linking ./mpn/generic/mul_fft.c to mpn/mul_fft.c
> > config.status: linking ./mpn/generic/mul_n.c to mpn/mul_n.c
> > config.status: linking ./mpn/x86/mul_basecase.asm to mpn/mul_basecase.asm
> > config.status: linking ./mpn/x86/p6/sqr_basecase.asm to mpn/sqr_basecase.asm
> > config.status: linking ./mpn/generic/random.c to mpn/random.c
> > config.status: linking ./mpn/generic/random2.c to mpn/random2.c
> > config.status: linking ./mpn/generic/sqrtrem.c to mpn/sqrtrem.c
> > config.status: linking ./mpn/generic/get_str.c to mpn/get_str.c
> > config.status: linking ./mpn/generic/set_str.c to mpn/set_str.c
> > config.status: linking ./mpn/generic/scan0.c to mpn/scan0.c
> > config.status: linking ./mpn/generic/scan1.c to mpn/scan1.c
> > config.status: linking ./mpn/generic/popcount.c to mpn/popcount.c
> > config.status: linking ./mpn/generic/hamdist.c to mpn/hamdist.c
> > config.status: linking ./mpn/generic/cmp.c to mpn/cmp.c
> > config.status: linking ./mpn/generic/perfsqr.c to mpn/perfsqr.c
> > config.status: linking ./mpn/generic/bdivmod.c to mpn/bdivmod.c
> > config.status: linking ./mpn/generic/gcd_1.c to mpn/gcd_1.c
> > config.status: linking ./mpn/generic/gcd.c to mpn/gcd.c
> > config.status: linking ./mpn/generic/gcdext.c to mpn/gcdext.c
> > config.status: linking ./mpn/generic/tdiv_qr.c to mpn/tdiv_qr.c
> > config.status: linking ./mpn/generic/dc_divrem_n.c to mpn/dc_divrem_n.c
> > config.status: linking ./mpn/generic/sb_divrem_mn.c to mpn/sb_divrem_mn.c
> > config.status: linking ./mpn/generic/jacbase.c to mpn/jacbase.c
> > config.status: linking ./mpn/x86/copyi.asm to mpn/copyi.asm
> > config.status: linking ./mpn/x86/p6/copyd.asm to mpn/copyd.asm
> > config.status: linking ./mpn/x86/p6/gmp-mparam.h to gmp-mparam.h
> > #
> > #
> > #
> > # Subconfigure of GMP done
> > # ------------------------
> > #
> > checking "for size of gmp limbs"... 4
> > checking "_SHORT_LIMB"... no
> > checking "_LONG_LONG_LIMB"... no
> > checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include
> > checking for gethostbyname... yes
> > checking for connect... yes
> > checking for remove... yes
> > checking for shmat... yes
> > checking for IceConnectionNumber in -lICE... yes
> > -I/usr/X11R6/include
> > -L/usr/X11R6/lib
> >
> > -lSM -lICE
> > checking for main in -lXmu... yes
> > checking for main in -lXt... yes
> > checking for main in -lXext... yes
> > checking for main in -lXaw... yes
> > checking for main in -lX11... yes
> > checking bfd.h usability... yes
> > checking bfd.h presence... yes
> > checking for bfd.h... yes
> > checking for bfd_init in -lbfd... yes
> > checking if need to define CONST for bfd... no
> > checking for useable bfd_boolean... no
> > checking for long... yes
> > checking size of long... 4
> > checking sizeof struct contblock... 8
> > checking endian.h usability... yes
> > checking endian.h presence... yes
> > checking for endian.h... yes
> > checking "endianness"... little
> > checking "finding DBEGIN"... got 0x8000000
> > checking "finding CSTACK_ADDRESS"... got -1073744736
> > checking "sizeof long long int"... yes
> > checking for pagewidth... 12
> > checking for getcwd... yes
> > checking for getwd... yes
> > checking for uname... yes
> > checking for gettimeofday... yes
> > checking sys/ioctl.h usability... yes
> > checking sys/ioctl.h presence... yes
> > checking for sys/ioctl.h... yes
> > checking for BSDgettimeofday... no
> > checking for gettimeofday... (cached) yes
> > checking for gettimeofday declaration... present
> > checking for sin in -lm... yes
> > checking for main in -lmingwex... no
> > checking math.h usability... yes
> > checking math.h presence... yes
> > checking for math.h... yes
> > checking values.h usability... yes
> > checking values.h presence... yes
> > checking for values.h... yes
> > checking float.h usability... yes
> > checking float.h presence... yes
> > checking for float.h... yes
> > checking for isnormal... yes
> > checking for isfinite... yes
> > checking for sockets... checking for connect... (cached) yes
> > checking for gethostbyname... (cached) yes
> > checking for main in -lreadline... yes
> > checking For network code for nsocket.c... yes
> > checking check for listen using fcntl... yes
> > checking for profil... yes
> > checking for setenv... yes
> > checking for _cleanup... no
> > checking FIONBIO vs. O_NONBLOCK for nonblocking I/O... O_NONBLOCK
> > checking check for SV_ONSTACK... yes
> > checking check for SIGSYS... yes
> > checking check for SIGEMT... no
> > checking asm/sigcontext.h usability... yes
> > checking asm/sigcontext.h presence... yes
> > checking for asm/sigcontext.h... yes
> > checking asm/signal.h usability... yes
> > checking asm/signal.h presence... yes
> > checking for asm/signal.h... yes
> > "sigcontext in signal.h"
> > checking for emacs... /usr/bin/emacs
> > checking emacs site lisp directory... /usr/share/emacs/21.2/site-lisp
> > checking emacs default.el... /usr/share/emacs/21.2/site-lisp/default.el
> > checking emacs info/dir... /usr/share/info/
> > checking for tcl/tk... checking for tclsh... tclsh
> > checking for main in -llieee... no
> > using TK_VERSION=8.3 in /usr/lib
> > checking alloca... yes
> > checking Checking for buggy gcc version from redhat... no
> > configure: creating ./config.status
> > config.status: creating makedefc
> > sed: file /tmp/csMec4jd/subs-1.sed line 32: Unterminated `s' command
> > config.status: creating windows/gcl.iss
> > sed: file /tmp/csMec4jd/subs-1.sed line 32: Unterminated `s' command
> > config.status: creating windows/gcl.ansi.iss
> > sed: file /tmp/csMec4jd/subs-1.sed line 32: Unterminated `s' command
> > config.status: creating windows/install.ansi.lsp
> > sed: file /tmp/csMec4jd/subs-1.sed line 32: Unterminated `s' command
> > config.status: creating windows/install.lsp
> > sed: file /tmp/csMec4jd/subs-1.sed line 32: Unterminated `s' command
> > config.status: creating h/gclincl.h
> > makedefc
> > add-defs1 386-linux
> > using 386-linux.defs
> > make[3]: Entering directory `/var/tmp/axiom/lsp/gcl-2.6.1'
> > rm -f bin/gcl xbin/gcl
> > MGCLDIR=`echo /var/tmp/axiom/lsp/gcl-2.6.1 | sed -e 'sX^\([a-z]\):X/\1Xg'` 
> > ; \
> > GCLDIR=`echo /var/tmp/axiom/lsp/gcl-2.6.1` ; \
> > make install-command "INSTALL_LIB_DIR=$GCLDIR" "prefix=$GCLDIR" 
> > "BINDIR=$MGCLDIR/unixport"
> > make[4]: Entering directory `/var/tmp/axiom/lsp/gcl-2.6.1'
> > rm -f /var/tmp/axiom/lsp/gcl-2.6.1/bin/gcl
> > (echo '#!/bin/sh' ; \
> > if gcc --version | grep -q -i mingw ; then echo "export 
> > C_INCLUDE_PATH=`echo $INSTALL_LIB_DIR`/h"; else echo "export 
> > C_INCLUDE_PATH=/var/tmp/axiom/lsp/gcl-2.6.1/h:\$C_INCLUDE_PATH"; fi ;\
> > echo exec /var/tmp/axiom/lsp/gcl-2.6.1/unixport/ \\ ; \
> > echo '   -dir' /var/tmp/axiom/lsp/gcl-2.6.1/unixport/ \\ ; \
> > echo '   -libdir' /var/tmp/axiom/lsp/gcl-2.6.1/ \\ ; \
> > echo '   -eval '\''(setq si::*allow-gzipped-file* t)'\' \\ ;\
> > ! [ -d "" ] || echo '   -eval '\''(setq si::*tk-library* '\"\"')'\' \\;\
> > [ "" = "" ] || echo '   -eval '\''(si::init-readline)'\' \\;\
> > echo '     '\"address@hidden" ) > /var/tmp/axiom/lsp/gcl-2.6.1/bin/gcl;
> > echo '#' other options: -load "/tmp/foo.o" -load "jo.lsp" -eval '"(joe 3)"' 
> > >> /var/tmp/axiom/lsp/gcl-2.6.1/bin/gcl
> > chmod a+x /var/tmp/axiom/lsp/gcl-2.6.1/bin/gcl
> > rm -f /var/tmp/axiom/lsp/gcl-2.6.1/bin/gclm.bat
> > if gcc --version | grep -q mingw ; then (echo '@SET cd='; \
> >  echo '@SET promp%prompt%'; \
> >  echo '@PROMPT SET cd'; \
> >  echo '@CALL>%temp%.\setdir.bat'; \
> >  echo '@'; \
> >  echo '% do not delete this line %'; \
> >  echo '@ECHO off'; \
> >  echo 'PROMPT %promp'; \
> >  echo 'FOR %%c IN (CALL DEL) DO %%c %temp%.\setdir.bat'; \
> >  echo 'set cwd=%cd%'; \
> >  echo 'set libdir=%cd%\..\lib\gcl-2.5.0'; \
> >  echo 'set unixportdir=%libdir%\unixport'; \
> >  echo 'path %cd%\..\mingw\bin;%PATH%'; \
> >  echo "start %unixportdir%\saved_gcl.exe -dir %unixportdir% -libdir 
> > %libdir% -eval \"(setq si::*allow-gzipped-file* t)\" %1 %2 %3 %4 %5 %6 %7 
> > %8 %9" ) > /var/tmp/axiom/lsp/gcl-2.6.1/bin/gclm.bat ; fi
> > rm -f /var/tmp/axiom/lsp/gcl-2.6.1/bin/gclfinal.bat
> > if gcc --version | grep -q -i mingw ; then (echo 'ECHO path 
> > %1\mingw\bin;%PATH% > gcli.bat'; \
> >  echo "ECHO start %1\lib\gcl-2.5.0\unixport\saved_gcl.exe -dir 
> > %1\lib\gcl-2.5.0\unixport -libdir %1\lib\gcl-2.5.0 -eval \"(setq 
> > si::*allow-gzipped-file* t)\" %1 %2 %3 %4 %5 %6 %7 %8 %9 >> gcli.bat" ) > 
> > /var/tmp/axiom/lsp/gcl-2.6.1/bin/gclfinal.bat ; fi
> > make[4]: Leaving directory `/var/tmp/axiom/lsp/gcl-2.6.1'
> > (cd xbin ; cp ../bin/gcl .)
> > cd cmpnew && make gcl_collectfn.o
> > make[4]: Entering directory `/var/tmp/axiom/lsp/gcl-2.6.1/cmpnew'
> > ../unixport/saved_pre_gcl ../unixport/ -compile gcl_collectfn.lsp
> > make[4]: ../unixport/saved_pre_gcl: Command not found
> > make[4]: *** [gcl_collectfn.o] Error 127
> > make[4]: Leaving directory `/var/tmp/axiom/lsp/gcl-2.6.1/cmpnew'
> > make[3]: *** [cmpnew/gcl_collectfn.o] Error 2
> > make[3]: Leaving directory `/var/tmp/axiom/lsp/gcl-2.6.1'
> > cp: cannot stat `unixport/saved_gcl': No such file or directory
> > make[2]: *** [gcldir] Error 1
> > make[2]: Leaving directory `/var/tmp/axiom/lsp'
> > make[1]: *** [lspdir] Error 2
> > make[1]: Leaving directory `/var/tmp/axiom'
> > make: *** [all] Error 2
> > norroy% 
> > Script done on Tue Nov 18 12:02:46 2003
> >
> >
> >
> 
> -- 
> David MENTRE <address@hidden> -- http://www.nongnu.org/axiom/
> 
> 
> _______________________________________________
> Axiom-developer mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/axiom-developer
> 
> 
> 

-- 
Camm Maguire                                            address@hidden
==========================================================================
"The earth is but one country, and mankind its citizens."  --  Baha'u'llah