|
From: | Konstantinos Poulios |
Subject: | Re: Problem with dirichlet condition and source term |
Date: | Mon, 2 Aug 2021 17:24:26 +0200 |
Thank you so much for your fast answer. I have already tried to do this :
md.add_initialized_data('condition',[0,1,0])md.add_Dirichlet_condition_with_multipliers(mim,'u',mfu,TOP,'condition')
But when i visualize the results I have the same displacement everywhere on my mesh. I have well written my constitutive law so normally I should have more little displacement when I go deeper but it is not the case.
/// Blanckaert Benjamin
De : Konstantinos Poulios <logari81@googlemail.com>
Envoyé : lundi 2 août 2021 15:38:55
À : BLANCKAERT Benjamin
Cc : getfem-users@nongnu.org
Objet : Re: Problem with dirichlet condition and source termDear Benjamin,
A source term corresponds to a Neumann BC. So the [0,1,0] vector that you apply is a actually a traction, not a displacement. You need to apply a non-homogeneous Dirichlet condition if you want to enforce a displacement of [0,1,0] at the top surface.
BRKostas
On Mon, Aug 2, 2021 at 3:17 PM BLANCKAERT Benjamin <Benjamin.BLANCKAERT@entpe.fr> wrote:
Dear Getfem Users,
I am doing an internship in which I try to modelize a simple case of soil reinforced with rigid inclusions but I have a problem with the interaction between the source term I apply and the dirichlet conditions. I explain :
I apply Dirichlet Condition in the 4 corner at the bottom of my model in the simplest way : md.add_Dirichlet_condition_with_multipliers(mim,'u',mfu,CORNER) (I use Python module)
I also add a source_term_brick at the top of my model, here an example with an unit displacement:
d = [0,1,0]md.add_initialized_data('d',d)md.add_source_term_brick(mim, 'u', 'd',TOP)
When I visualize the results with paraview I don't have the expected results. Indeed the displacement at the TOP is 2.2E-6 (which is very far from 1).
I tried to identify the problem and I am almost sure that it is a problem with the dirichlet conditions which spread too much.
Do you have any idea about How to fix it ?
/// Blanckaert Benjamin
[Prev in Thread] | Current Thread | [Next in Thread] |