[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Gluster-devel] AFR Replication
From: |
Christopher Hawkins |
Subject: |
RE: [Gluster-devel] AFR Replication |
Date: |
Fri, 18 Apr 2008 09:02:13 -0400 |
The http://www.gluster.org/docs/index.php/Understanding_AFR_Translator howto
contains:
### Add network serving capability to above brick.
volume server
type protocol/server
subvolumes brick brick-afr brick-ns
option transport-type tcp/server # For TCP/IP transport
option auth.ip.brick.allow * # access to "brick" volume
option auth.ip.brick-afr.allow * # access to "brick" volume
option auth.ip.brick-ns.allow * # access to "brick" volume
end-volume
There are multiple auth lines, but they refer to different volumes so maybe
this is ok?
Thanks,
Chris
-----Original Message-----
From: address@hidden [mailto:address@hidden On
Behalf Of Krishna Srinivas
Sent: Friday, April 18, 2008 8:57 AM
To: Christopher Hawkins
Cc: Gluster Devel
Subject: Re: [Gluster-devel] AFR Replication
Can you give the howto link? It needs to be corrected.
Multiple line options is not supported yet, as of now it has to be saperated
by comma.
Krishna
On Fri, Apr 18, 2008 at 6:14 PM, Christopher Hawkins
<address@hidden> wrote:
> That worked for me. According to the howto you can specify multiple
> auth lines, but it looks like only one auth line per volume is correct?
>
>
> Thanks,
> Chris
>
> -----Original Message-----
> From: address@hidden
>
> [mailto:address@hidden
> ] On
>
> Behalf Of Krishna Srinivas
> Sent: Friday, April 18, 2008 8:26 AM
> To: address@hidden
> Cc: Gluster Devel
> Subject: Re: [Gluster-devel] AFR Replication
>
>
>
> Gordon,
>
> Specify the following option in server spec file:
> option auth.ip.foo.allow 192.168.*,127.0.0.1
>
> Krishna
>
> On Fri, Apr 18, 2008 at 5:00 PM, <address@hidden> wrote:
> > On Fri, 18 Apr 2008, Krishna Srinivas wrote:
> >
> >
> > > If you still get errors, check for error messages when you start
> the > > client.
> > >
> >
> > OK, upgraded to 1.3.8pre5 RPMs. Started both servers, then both
clients.
> > Now the logs say:
> >
> > glusterfs.log:
> > 2008-04-18 12:22:18 C [afr.c:6185:afr_check_xattr_cbk] foo:
[CRITICAL]:
> > 'foo1' doesn't support Extended attribute > 2008-04-18 12:22:18 E
> > [client-protocol.c:5089:client_protocol_handshake_reply] foo2:
> > SETVOLUME on remote-host failed: ret=-1 error=Authentication failed
> > 2008-04-18 12:22:18 W [client-protocol.c:279:client_protocol_xfer]
foo2:
> > attempting to pipeline request type(1) op(19) with handshake >
> 2008-04-18 12:22:18 W >
> [client-protocol.c:4759:client_protocol_cleanup]
> > foo2: cleaning up state in transport object 0x60ee60 > 2008-04-18
> 12:22:18 E > [client-protocol.c:4809:client_protocol_cleanup]
> > foo2: forced unwinding frame type(1) op(19) address@hidden >
> 2008-04-18 12:22:18 E [client-protocol.c:4025:client_setxattr_cbk]
> > foo2: no proper reply from server, returning ENOTCONN >
> 2008-04-18 12:22:18 C [afr.c:6185:afr_check_xattr_cbk] appleseed:
> > [CRITICAL]: 'foo2' doesn't support Extended attribute >
> 2008-04-18 12:22:18 C [tcp.c:87:tcp_disconnect] foo2: connection >
> disconnected > > glusterfsd.log:
> > 2008-04-18 12:22:14 E [authenticate.c:173:gf_authenticate] auth:
> > Nobody cares to authenticate!! Rejecting the client foo >
> 2008-04-18 12:22:14 E [server-protocol.c:5633:mop_setvolume] server:
> > Cannot authenticate client from 192.168.0.1:1021 > 2008-04-18
> 12:22:14 E > [server-protocol.c:6002:server_protocol_interpret]
> > server: bound_xl is null
> > 2008-04-18 12:22:14 C [tcp.c:87:tcp_disconnect] server: connection
> > disconnected > 2008-04-18 12:22:15 E
> [protocol.c:271:gf_block_unserialize_transport]
> > server: EOF from peer (192.168.0.1:1020) > 2008-04-18 12:22:15 C
> [tcp.c:87:tcp_disconnect] server: connection > disconnected >
> 2008-04-18 12:22:18 W [posix.c:1511:posix_setxattr] foo: setxattr on /:
> > Operation not supported
> >
> > Does this shed more light on what is going wrong?
> >
> >
> >
> > Gordan
> >
> >
> > _______________________________________________
> > Gluster-devel mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/gluster-devel
> >
>
>
> _______________________________________________
> Gluster-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gluster-devel
>
>
>
> _______________________________________________
> Gluster-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gluster-devel
>
- [Gluster-devel] AFR Replication, gordan, 2008/04/18
- Message not available
- Message not available
- Re: [Gluster-devel] AFR Replication, gordan, 2008/04/18
- Re: [Gluster-devel] AFR Replication, Krishna Srinivas, 2008/04/18
- Re: [Gluster-devel] AFR Replication, gordan, 2008/04/18
- Re: [Gluster-devel] AFR Replication, gordan, 2008/04/18
- Re: [Gluster-devel] AFR Replication, Krishna Srinivas, 2008/04/18
- RE: [Gluster-devel] AFR Replication, Christopher Hawkins, 2008/04/18
- Re: [Gluster-devel] AFR Replication, Krishna Srinivas, 2008/04/18
- RE: [Gluster-devel] AFR Replication,
Christopher Hawkins <=
- Re: [Gluster-devel] AFR Replication, Krishna Srinivas, 2008/04/18
- Re: [Gluster-devel] AFR Replication, gordan, 2008/04/18
- Re: [Gluster-devel] AFR Replication, gordan, 2008/04/18
- Re: [Gluster-devel] AFR Replication, Anand Avati, 2008/04/18
- Re: [Gluster-devel] AFR Replication, gordan, 2008/04/18
- RE: [Gluster-devel] AFR Replication, Christopher Hawkins, 2008/04/18
- RE: [Gluster-devel] AFR Replication, gordan, 2008/04/18
- Re: [Gluster-devel] AFR Replication, Daniel Maher, 2008/04/18
- Re: [Gluster-devel] AFR Replication, gordan, 2008/04/18
- RE: [Gluster-devel] AFR Replication, Christopher Hawkins, 2008/04/18