Re: [Gluster-devel] AFR: machine crash hangs other mounts or transport endpoint not connected

[Gerry Reno]

Krishna Srinivas wrote:
> Gerry, Christopher,
>
> Here is what I tried to do. Two servers, one client, simple setup, afr on the
> client side. I did "ls" on client mount point, it works, now I do
> "ifconfig eth0 down"
> on the server, next I do "ls" on client, it hangs for 10 secs (timeout value)
> and fails over and starts working again without any problem.
>
> I guess few users are facing the problem you guys are facing. Can you give us
> your setup details and mention the exact steps to reproduce. Also try
> to come up with minimal config details which can still reproduce the
> problem
>
> Thanks!
> Krishna
>   
Krishna and Anand:

   Hope these will help.  Here are my configs:

================================================
### file: glusterfs-server.vol
### GRP: this files goes on all storage bricks
##############################################
###  GlusterFS Server Volume Specification  ##
##############################################
  #### CONFIG FILE RULES:
  ### "#" is comment character.
  ### - Config file is case sensitive
  ### - Options within a volume block can be in any order.
  ### - Spaces or tabs are used as delimitter within a line.
  ### - Multiple values to options will be : delimitted.
  ### - Each option should end within a line.
  ### - Missing or commented fields will assume default values.
  ### - Blank/commented lines are allowed.
  ### - Sub-volumes should already be defined above before referring.

  ### Export volume "brick" with the contents of "/home/export" directory.
volume brick
 type storage/posix                      # POSIX FS translator
 option directory /home/vmail/mailbrick  # Export this directory
end-volume

  ### Add network serving capability to above brick.
volume server
 type protocol/server
 option transport-type tcp/server     # For TCP/IP transport
# option ibv-send-work-request-size  131072
# option ibv-send-work-request-count 64
# option ibv-recv-work-request-size  131072
# option ibv-recv-work-request-count 64
# option transport-type ib-sdp/server  # For Infiniband transport
# option transport-type ib-verbs/server # For ib-verbs transport
# option bind-address  127.0.0.1    # Default is to listen on all interfaces
 option listen-port 6996              # Default is 6996
# option client-volume-filename /etc/glusterfs/glusterfs-client.vol

 subvolumes brick
# NOTE: Access to any volume through protocol/server is denied by
# default. You need to explicitly grant access through # "auth"
# option.
# option auth.ip.brick.allow  *              # Allow full access to 
"brick" volume
# option auth.ip.brick.allow  192.168.*      # Allow subnet access to 
"brick" volume
option auth.ip.brick.allow  127.0.0.1,192.168.1.220,192.168.1.221  # 
Allow access to "brick" volume
end-volume
================================================

================================================
### file: glusterfs-client.vol
### GRP: this file goes on every client node in cluster
##############################################
###  GlusterFS Client Volume Specification  ##
##############################################
  #### CONFIG FILE RULES:
  ### "#" is comment character.
  ### - Config file is case sensitive
  ### - Options within a volume block can be in any order.
  ### - Spaces or tabs are used as delimitter within a line.
  ### - Each option should end within a line.
  ### - Missing or commented fields will assume default values.
  ### - Blank/commented lines are allowed.
  ### - Sub-volumes should already be defined above before referring.

  ### Add client feature and declare local subvolume
volume client-local
 type    storage/posix
 option  directory         /home/vmail/mailbrick
end-volume

  ### Add client feature and attach to remote subvolume
volume client1
 type    protocol/client
 option  transport-type    tcp/client     # for TCP/IP transport
 option  remote-host       192.168.1.220   # IP address of the remote brick
 option  remote-port       6996           # default server port is 6996
 option  remote-subvolume  brick          # name of the remote volume
end-volume

volume client2
 type    protocol/client
 option  transport-type    tcp/client
 option  remote-host       192.168.1.221
 option  remote-port       6996
 option  remote-subvolume  brick
end-volume


#volume bricks
#  type cluster/unify
#  subvolumes *
#  option scheduler nufa
#  # does this brick name must be in local server.vol
#  option nufa.local-volume-name brick  # note 'brick' is singular
#end-volume

  ### Add automatic file replication (AFR) feature
volume afr
 type  cluster/afr
 subvolumes  client1 client2
#  option  replicate:*.html 2
#  option  replicate:*.db 5
## ok, this would be RAID-1 on 2 nodes
#  option  replicate:* 2
## so how would you say RAID-1 on all nodes? with * ?
#  option  replicate *:2
#  option  replicate client1,client2:2
# option replicate is no longer supported:   
http://www.mail-archive.com/address@hidden/msg02201.html
# pattern-matching translator will be provided later in 1.4
end-volume

  ### Add writeback feature
#volume writeback
#  type performance/write-behind
#  option aggregate-size 131072 # unit in bytes
#  subvolumes client  
#end-volume

  ### Add readahead feature
#volume readahead
#  type performance/read-ahead
#  option page-size 65536     # unit in bytes
#  option page-count 16       # cache per file  = (page-count x page-size)
#  subvolumes writeback
#end-volume
================================================


Regards,
Gerry