gluster-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Gluster-devel] 1.4.0qa19 - readonly filter translator


From: Snezhana Bekova
Subject: Re: [Gluster-devel] 1.4.0qa19 - readonly filter translator
Date: Wed, 18 Jun 2008 13:17:20 +0300
User-agent: Mail.BG Webmail H3 (4.1.4)



  Hi Amar,
Thanks for your answer, I tested glusterfs-1.4.0tla197. On the client glusterfs I can't mount the readonly volume.
I have posted the client logs on pastebin, when I try to mount the volume:
http://gluster.pastebin.org/44413[1]

  Here is the client config file:

  volume client-wks12
  type protocol/client
  option transport-type tcp/client    
  option remote-host 10.0.0.1       
  option remote-subvolume brick-readonly 
  option transport-timeout 10
end-volume

  volume client-valhalla
  type protocol/client
  option transport-type tcp/client 
  option remote-host 10.0.0.2      
  option remote-subvolume brick-readonly  
  option transport-timeout 10
end-volume

  volume afr
 type cluster/afr
 subvolumes client-wks12 client-valhalla
end-volume

  volume client-wks12-webtmp
  type protocol/client
  option transport-type tcp/client    
  option remote-host 10.0.0.1       
 option remote-subvolume brick-webtmp 
 option transport-timeout 10
end-volume

  volume client-valhalla-webtmp
  type protocol/client
  option transport-type tcp/client    
  option remote-host 10.0.0.2       
  option remote-subvolume brick-webtmp
  option transport-timeout 10
end-volume

  volume afr-webtmp
  type cluster/afr
  subvolumes client-wks12-webtmp client-valhalla-webtmp
end-volume

  volume client-wks12-wwwroot1
  type protocol/client
  option transport-type tcp/client    
  option remote-host 10.0.0.1       
 option remote-subvolume brick-local1
 option transport-timeout 10
end-volume

  volume client-valhalla-wwwroot1
  type protocol/client
  option transport-type tcp/client    
  option remote-host 10.0.0.2       
  option remote-subvolume brick-local1
  option transport-timeout 10
end-volume

  volume afr-wwwroot1
  type cluster/afr
  subvolumes client-wks12-wwwroot1 client-valhalla-wwwroot1
end-volume

  Here is the one server config file:

  volume brick-local
  type storage/posix
  option directory /wwwroot     
end-volume

  volume brick-local1
  type storage/posix
  option directory /wwwroot/Advert
end-volume

  volume brick-readonly
  type features/filter
  subvolumes brick-local
end-volume

  volume brick-webtmp
  type storage/posix                 
  option directory /var/webtmp  
end-volume

  volume server
  type protocol/server
  option transport-type tcp/server
  subvolumes brick-local brick-readonly brick-webtmp brick-local1
  option auth.ip.brick-webtmp.allow *
  option auth.ip.brick-local.allow *
  option auth.ip.brick-local1.allow *
  option auth.ip.brick-readonly.allow *
end-volume

Thanks,
Snezhana

  Цитат от "Amar S. Tumballi" <address@hidden>:

Hi Snezhana,
  The fix for this already went into the source repo. To make testing easy
for you, I have created a tarball, available here:

http://gnu.zresearch.com/~amar/qa-releases/glusterfs-1.4.0tla197.tar.gz[2]

Let us know how the testing goes.

Regards,
Amar

2008/6/17 Snezhana Bekova <address@hidden>:

Many Thanks! I'll wait next release.

--

Snezhana

Цитат от "Amar S. Tumballi" <address@hidden>:


> Well, thanks for the report. I found the bug. will be fixed in next
commit.
> Should be available in tar.gz format with next release (due in a day or
> two).
>
> -amar
>
> On Mon, Jun 16, 2008 at 5:35 PM, Amar S. Tumballi <address@hidden>
> wrote:
>
>> Yes! any crash is treated as bug. But I would like to see the client log
>> file too. The log about extended attribute not supported is due to
having
>> filter (which doesn't allow setxattr to succeed). Anyways, it would be
great
>> help if you could send the client spec file.
>>
>> Regards,
>> Amar
>>
>> 2008/6/16 Snezhana Bekova <address@hidden>:
>>
>>
>>>
>>>  Hello,
>>> I've started testing glusterfs version 1.4.0qa19. There is problem with
>>> readonly filter. When I try to a make write operation on readonly
>>> brick on a
>>> glusterfs client (client side afr), the glustrefs server die.
>>>
>>> This is from the glusterfs client log messages when mounting readonly
>>> volume:
>>> "2008-06-16 17:54:17 C [afr.c:6187:afr_check_xattr_cbk] afr:
[CRITICAL]:
>>> 'client-wks1' doesn't support Extended attribute: Read-only file system
>>> 2008-06-16 17:54:17 C [afr.c:6187:afr_check_xattr_cbk] afr: [CRITICAL]:
>>> 'client-wks2' doesn't support Extended attribute: Read-only file
system"
>>>
>>>  And this is from the glusterfs server log when die:
>>>
>>>  Here is a part of the log from glusterfs server that crashed:
>>> "TLA Repo Revision: glusterfs--mainline--3.0--patch-192
>>> Time : 2008-06-16 17:55:41
>>> Signal Number : 11
>>>
>>>  /usr/sbin/glusterfsd -f /etc/glusterfs/glusterfs-server.vol -l
>>> /var/log/glusterfs/glusterfsd.log -L
>>> WARNING --pidfile /var/run/glusterfsd.pid
>>> volume server
>>>   type protocol/server
>>>   option auth.ip.brick-readonly.allow *
>>>   option auth.ip.brick-local1.allow *
>>>   option auth.ip.brick-local.allow *
>>>   option auth.ip.brick-webtmp.allow *
>>>   option transport-type tcp
>>>   subvolumes brick-local brick-readonly brick-webtmp brick-local1
>>> end-volume
>>>
>>>  volume brick-webtmp
>>>   type storage/posix
>>>   option directory /var/webtmp
>>> end-volume
>>>
>>>  volume brick-readonly
>>>   type features/filter
>>>   subvolumes brick-local
>>> end-volume
>>>
>>>  volume brick-local1
>>>   type storage/posix
>>>   option directory /wwwroot/Advert
>>> end-volume
>>>
>>>  volume brick-local
>>>   type storage/posix
>>>   option directory /wwwroot
>>> end-volume
>>>
>>>  frame : type(1) op(27)
>>> 2008-06-16 17:55:41 C [common-utils.c:155:gf_print_bytes] : xfer ==
27919,
>>> rcvd == 14515[0xffffe420]
>>>
>>>
/usr/lib/glusterfs/1.4.0qa19/xlator/features/filter.so(filter_create+0x6c)[0xb7f77f9c]
>>>
>>>
/usr/lib/glusterfs/1.4.0qa19/xlator/protocol/server.so(server_create+0x180)[0xb7584440]
>>>
>>>
/usr/lib/glusterfs/1.4.0qa19/xlator/protocol/server.so(protocol_server_interpret+0xd6)[0xb7585056]
>>>
>>>
/usr/lib/glusterfs/1.4.0qa19/xlator/protocol/server.so(protocol_server_pollin+0xb3)[0xb7585263]
>>>
>>>
/usr/lib/glusterfs/1.4.0qa19/xlator/protocol/server.so(notify+0x51)[0xb7585351]
>>> /usr/lib/glusterfs/1.4.0qa19/transport/tcp.so[0xb757c249]
>>> /usr/lib/libglusterfs.so.0[0xb7f6d5c5]
>>> /usr/lib/libglusterfs.so.0(event_dispatch+0x21)[0xb7f6c431]
>>> [glusterfs](main+0x795)[0x804a545]
>>> /lib/i686/cmov/libc.so.6(__libc_start_main+0xe0)[0xb7e02450]
>>> [glusterfs][0x8049871]
>>> ---------
>>> 2008-06-16 18:13:05 W [glusterfs.c:419:glusterfs_cleanup_and_exit]
>>> glusterfs: shutting down server
>>> 2008-06-16 18:13:05 C [common-utils.c:155:gf_print_bytes] : xfer == 0,
>>> rcvd == 0"
>>>
>>> The underlying file system is ext3 and there is extended attribute
>>> support!
>>> The problem not exist on version 1.3.9.
>>> Can you tell me what is wrong? Maybe it is a bug?
>>>
>>>  Thanks,
>>> Snezhana
>>> _______________________________________________
>>> Gluster-devel mailing list
>>> address@hidden
>>> http://lists.nongnu.org/mailman/listinfo/gluster-devel[3]
>>>
>>
>>
>>
>> --
>> Amar Tumballi
>> Gluster/GlusterFS Hacker
>> [bulde on #gluster/irc.gnu.org]
>> http://www.zresearch.com[4] - Commoditizing Super Storage!
>
>
>
>
> --
> Amar Tumballi
> Gluster/GlusterFS Hacker
> [bulde on #gluster/irc.gnu.org]
> http://www.zresearch.com[5] - Commoditizing Super Storage!
>




--
Amar Tumballi
Gluster/GlusterFS Hacker
[bulde on #gluster/irc.gnu.org]
http://www.zresearch.com[6] - Commoditizing Super Storage!


Links:
------
[1] http://gluster.pastebin.org/44413
[2] http://gnu.zresearch.com/~amar/qa-releases/glusterfs-1.4.0tla197.tar.gz
[3] http://lists.nongnu.org/mailman/listinfo/gluster-devel
[4] http://www.zresearch.com/
[5] http://www.zresearch.com/
[6] http://www.zresearch.com/



reply via email to

[Prev in Thread] Current Thread [Next in Thread]