[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[gNewSense-users] wireless config

From: Quiliro Ordóñez
Subject: [gNewSense-users] wireless config
Date: Tue, 9 Dec 2008 17:08:28 -0500

I cannot configure my wireless network interface. In Windows it works perfectly.

$ lspci | grep Network
00:09.0 Network controller: RaLink RT2561/RT61 802.11g PCI

$ lsmod |grep rt61
rt61pci                24576  0
rt2x00pci              10368  1 rt61pci
rt2x00lib              21632  2 rt61pci,rt2x00pci
mac80211              162580  3 rt61pci,rt2x00pci,rt2x00lib
eeprom_93cx6            2304  1 rt61pci

$ ifconfig wlan2
wlan2     Link encap:Ethernet  direcciónHW 00:08:a1:ac:2b:f4 
          inet dirección:  Difusión:  Máscara:
          DIFUSIÓN MULTICAST  MTU:1500  Métrica:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          colisiones:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

$ iwconfig  wlan2
wlan2     IEEE 802.11g  ESSID:"galvano" 
          Mode:Managed  Channel:0  Access Point: Not-Associated  
          Tx-Power=0 dBm  
          Retry min limit:7   RTS thr:off   Fragment thr=2346 B  
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

I don't know why it has been assigned channel 0

Please help. 8 hours struggling. Trying with different cards of the same model in different computersbut no luck. Any ideas? Thks.

Quiliro Ordóñez
593(02)340 1517 / 593(09)821 8696
Artículos recientes:
- Por que aceptar derechos de autor y patentes si no tenemos ninguna?

reply via email to

[Prev in Thread] Current Thread [Next in Thread]