Re: Data Calls - No Carrier

[Christopher Kemp]

Hi,

On 2002.05.01 08:32 Warren Flemmer wrote:
> Yep, that did it, it compiled,  but the datacalls are still getting 'no 
> carrier'
> shortly after 'carrier' (in minicom)
> 
> Gnokiid showed the following:
> GNOKIID Version 0.4.0pre19
> UNHANDLED FRAME RECEIVED
> request: 0x01 / 0x001a
> 00 01 00 42 05 01 07 a2 c8 81 21 15 63 a8 00 00 |    B      ! c
> 07 a3 b8 81 20 15 63 80 01 60                   |       c  `
> reply: 0x06 / 0x0027
> 01 08 00 06 00 00 00 03 00 04 07 01 a2 c8 81 15 |
> 63 a8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | c
> 00 00 00 00 00 00 00                            |
> Please read Docs/Reporting-HOWTO and send a bug report!
> XID: Ver 1 Comp [Pt=0 P0=3 P1l=0 P1h=8 P2=20] XID: Ver 1 Comp [Pt=0 P0=3 
> P1l=0 P1h=8 P2=20] XID: Ver 1 Comp [Pt=0 P0=3 P1l=0 P1h=8 P2=20] XID: 
> Ver 1 Comp [Pt=0 P0=3 P1l=0 P1h=8 P2=20] XID: Ver 1 Comp [Pt=0 P0=3 
> P1l=0 P1h=8 P2=20] XID: Ver 1 Comp [Pt=0 P0=3 P1l=0 P1h=8 P2=20] XID: 
> Ver 1 Comp [Pt=0 P0=3 P1l=0 P1h=8 P2=20] XID: Ver 1 Comp [Pt=0 P0=3 
> P1l=0 P1h=8 P2=20] XID: Ver 1 Comp [Pt=0 P0=3 P1l=0 P1h=8 P2=20] XID: 
> Ver 1 Comp [Pt=0 P0=3 P1l=0 P1h=8 P2=20] XID: Ver 1 Comp [Pt=0 P0=3 
> P1l=0 P1h=8 P2=20] XID: Ver 1 Comp [Pt=0 P0=3 P1l=0 P1h=8 P2=20] XID: 
> Ver 1 Comp [Pt=0 P0=3 P1l=0 P1h=8 P2=20] XID: Ver 1 Comp [Pt=0 P0=3 
> P1l=0 P1h=8 P2=20] XID: Ver 1 Comp [Pt=0 P0=3 P1l=0 P1h=8 P2=20] XID: 
> Ver 1 Comp [Pt=0 P0=3 P1l=0 P1h=8 P2=20] XID: Ver 1 Comp [Pt=0 P0=3 
> P1l=0 P1h=8 P2=20] XID: Ver 1 Comp [Pt=0 P0=3 P1l=0 P1h=8 P2=20] XID: 
> Ver 1 Comp [Pt=0 P0=3 P1l=0 P1h=8 P2=20] XID: Ver 1 Comp [Pt=0 P0=3 
> P1l=0 P1h=8 P2=20]

From a quick glance, it looks to me as if your service provider is not
letting you (normally) use RLP version 0 (which hasn't got V32
compression).  The XID discussion above seems to get 'stuck' on Ver 1. 
Although they should be backwards compatible to ver 0 a couple of other
people have had this problem as well.  I'm afraid there's probably nothing
you can do except check a different physical position (perhaps the base
station is different?) or write some compression support.....

I'll try and do compression support at some point - but it's unlikely to be
before the summer - and last time I checked, orange here in the uk didn't
support mode 1.....

Chris

> 
> Thanks
> Warren
> 
> BORBELY Zoltan wrote:
> 
> >Hi,
> >
> >On Tue, Apr 30, 2002 at 05:53:13PM +0200, Warren Flemmer wrote:
> >
> >>I got the CVS without problem. Autoconf and ./configure worked fine.
> >>But compiling I get (make):
> >>
> >
> >Don't forget to run autoheader too, or just issue autogen.sh
> >
> >Bye,
> >Bozo
> >
> >_______________________________________________
> >gnokii-users mailing list
> >address@hidden
> >http://mail.freesoftware.fsf.org/mailman/listinfo/gnokii-users
> >
> 
> 
> 
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://mail.freesoftware.fsf.org/mailman/listinfo/gnokii-users
>