Re: congratulation

[Carles Pina i Estany]

Hi,

> > Three years ago I used gnokii. But my cable was broken and I don't use
> > more until today. Today I reinstall gnokii with new cable, and
> > congratulations!! A very good work! It is a very nice program with more
> > features!
> >
> > Thank you very much for your work.
> >
> > Ops... one thing don't work with my Nokia 5110 V. 05.11 and my cable F-BUS
> > and M-BUS... it is gnokii --getsecuritycode:
> 
> Maybe it's a silly question, but did you ./configure --enable-security?

the problem is that --getsecuritycode with 6110, 5110, etc. model aren't
implemented. 

the next week i will try to implement this (I have some exam this weel :-|
)

but... mgnokii2 works fine with this option. I will give you some
information (if somebody implements it, tell me)

.........

[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[Received Ack of type 64, seq: 03]
[Received Ack of type 40, seq: 04]
[Sending Ack of type 40, seq: 0]
Received frame 0x40 / 0x000c
01 |01 |64d|03 |01 |2f/|08 |01 |01 |01 |1b |58X
..d../.....X    
State of security commands set
Sending frame 0x40 / 0x0004
00 |01 |6en|01                                                 ..n.            
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[ERROR: incorrect char - ff, not 1e]
[Received Ack of type 40, seq: 05]
[Sending Ack of type 40, seq: 1]
Received frame 0x40 / 0x000b
01 |01 |6en|01 |01 |322|333|355|377|377|00                     ..n..23577.     
Security Code is "23577"

and from mygnokii2 docs/protocol/nk6110.txt

0x08: Security codes
    s Change code           { 0x0004, code, "current", 0x00, "new", 0x00 }
                            where code: 1: security code (5 chars)
                                        2: PIN (4 chars)
                                        3: PIN2 (4 chars)
                                        4: PUK (8 chars)
                                        5: PUK2 (8 chars)
    s Status request        { 0x0007, 0x01 }
    r pin recvd             { 0x0008, accepted }
                            where accepted: 0x0c (or 0x06): OK
                                            code: waiting for
(0x08/0x0004) code
    s entering code         { 0x000a, code, "code", 0x00 }
                            where code: see 0x08/0x0004

I _think_ that the code is in security code

Thanks!

----
Carles Pina i Estany    || address@hidden address@hidden
        http://www.pinux.info
        http://www.salleurl.edu/~is08139