[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
fax receiving (Nokia Cardphone or others) ?
From: |
Robert Michel |
Subject: |
fax receiving (Nokia Cardphone or others) ? |
Date: |
Wed, 27 Nov 2002 13:45:02 +0100 |
Salve,
I whant to write a smal guide about GSM and Linux for mobilix.org
and I get everything running with my PCMICA Nokia Cardphone but
receiving fax calls.
Will gnokii software help receiving fax in general?
The network is singnaling this incomming call as voice, and with
minicom nothing is visible until activating extendet signaling:
+CRING: VOICE
but this brings not efax to react.
I do not think than hacking efax and replace the keyword RING
with "+CRING: VOICE" would work, faxing and GSM seems to be
technicaly a little bit complicated.
So do you know anythink about "Fax receiving via GSM"
- is this already possibel with GNU/Linux
- how?
Any ideas, informations wellcome.
rob
>From ATNOKIA.pdf page 40:
------------------------------------
+CRC Celluar Result Codes
This command controls whether or not the extended format incoming call
indication is usd. When enabled, an incomming call is indicated to the DTE
with the result code +CRING:<type> instead of the normal RING. See also
section Result Codes. (GSM 07.07 section 6.11.)
Syntax
AT+CRC=<mode> Set incoming call information mode. The
default option is 0.
AT+CRC? Query current setting
Response is +CRC:<mode>
AT+CRC=? Show supported modes.
Respondse is +RCR:(list of supported
<modes>´s).
Values for <mode>:
0 Disable extended format call indication.
1 Enable extended format call indication.
------------------------------------
Mit AT+CRC=1 habe ich in minicom
----
at+crc=1
OK
+CRING: VOICE
---
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- fax receiving (Nokia Cardphone or others) ?,
Robert Michel <=