--sendsms fails on T68

[Trevor Hawkins]

Hi,

When running "gnokii --sendsms" on my Sony Ericsson T68 over an rfcomm
link in AT mode, I get "+CMS ERROR: 500" unknown error every time.  The
attached file contains the full output in debug mode.

When I run --sendsms on my 6310i, also over Bluetooth in AT mode, it
works perfectly.  So, I took the data that gnokii sends to the 6310i (in
the +CMGS cmd) and manually sent it to the T68, by using the +CMGS
command in minicom -- and this works perfectly:

-----------------
at+cgmi
ERICSSON                                                                        
                                     OK

at+cmgs=25
> 07917150979603F011000B916140565790F90000AA0CF4F29C0E6A97E7F3F0B90C^Z
+CMGS: 192
OK
----------------

In other words, the T68 will send SMS messages fine, but only if I use
minicom to manually enter the +CMGS data that gnokii creates for the
6310i.  The PDU strings gnokii creates are different, at the beginning. 
 
For example, with text "test message" and my number/SMSC, the 6310
sends:
07917150979603F011000B916140565790F90000AA0CF4F29C0E6A97E7F3F0B90C

whereas the T68, with the exact same text/destination/SMSC will send:
  0691077569390011000B916140565790F90000AA0CF4F29C0E6A97E7F3F0B90C

and they both have the same length (AT+CMGS=25 for both), even though
the one string is shorter.  This was all done with the phones using the
same SIM card and SMSC.  Note that "--savesms" works perfectly fine on
the T68.

I started going through the gnokii code but I don't really understand
the SMS data format and didn't see anything obvious.  I have a suspicion
that it is related to the SMSC representation on the T68, as this looked
to be the only thing grabbed from the phone in atgen.c?


Anyways, if anyone can help me get the T68 sending from gnokii that
would be hugely appreciated.  Thanks in advance and thanks for the
wonderful program.



Cheers,
Trevor

out.txt
Description: Text document