Re: First time user questions

[Dogsbody]

> > Q1: The initialisation seems to take quite a while when communicating with the
> > phone.  I have set "connection = dlr3p" but that hasn't seemed to help.  Is this
> > normal or is there something else I can do? (new data cable?)
>
> Please show the debug dump from your configuration. Log from all
> configuration you use would be helpfull.

Hi pkot,

Information below, thank you....

$ grep -v "^#" $HOME/.gnokiirc
[global]
port = /dev/ttyS0
model = 6210
initlength = default
connection = dlr3p
use_locking = no
serial_baudrate = 115200
smsc_timeout = 10
[gnokiid]
bindir = /usr/local/sbin/
[connect_script]
TELEPHONE = 12345678
[disconnect_script]
[logging]
debug = on
rlpdebug = off
xdebug = off

$ gnokii --getsms IN 1 -d
GNOKII Version 0.6.3
LOG: debug mask is 0x1
phone instance config:
model: 6210
port_device: /dev/ttyS0
connection_type: 2
init_length: 0
serial_baudrate: 115200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
Connecting
Serial device: opening device /dev/ttyS0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2
The fbus stream is out of sync - expected 0x0c, got ff
[Received Ack of type 1b, seq: 80]
[Sending Ack of type 1b, seq: 5]
Message received: 0x1b / 0x0037
01 1c 00 04 00 56 20 30 35 2e 32 37 0a 30 31 2d |      V 05.27 01-
30 38 2d 30 31 0a 4e 50 45 2d 33 0a 28 63 29 20 | 08-01 NPE-3 (c)
4e 4d 50 2e 00 33 20 42 38 20 38 31 20 32 30 20 | NMP. 3 B8 81 20
31 35 20 36 33 20 38                            | 15 63 8
Received message type 1b
Received model NPE-3
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
[Received Ack of type 40, seq:  1]
[Sending Ack of type 40, seq: 6]
Message received: 0x40 / 0x000c
01 01 64 02 01 4c 0d 01 01 01 1b 58             |   d  L     X
Received message type 40
Unknown security command
Message: Extended commands enabled.
Getting SMS (validating)...
Getting SMS Folders...
Message sent: 0x14 / 0x0006
00 01 00 7a 00 00                               |    z
[Received Ack of type 14, seq:  2]
[Sending Ack of type 14, seq: 7]
Message received: 0x14 / 0x0047
01 25 00 7b 04 08 00 49 00 6e 00 62 00 6f 00 78 |  % {   I n b o x
00 00 10 00 4f 00 75 00 74 00 62 00 6f 00 78 00 |     O u t b o x
00 18 00 41 00 72 00 63 00 68 00 69 00 76 00 65 |    A r c h i v e
00 00 20 00 54 00 65 00 6d 00 70 00 6c 00 61 00 |     T e m p l a
74 00 65 00 73 00 00                            | t e s
Received message type 14
Message: 4 SMS Folders received:
Folder Index: 8 Folder name: Inbox
Folder Index: 16        Folder name: Outbox
Folder Index: 24        Folder name: Archive
Folder Index: 32        Folder name: Templates
Getting SMS Folder (8) status ...
Special case INBOX in GetSMSFolderStatus!
Message sent: 0x14 / 0x0007
00 01 00 6b 08 0f 01                            |    k
[Received Ack of type 14, seq:  3]
[Sending Ack of type 14, seq: 0]
Message received: 0x14 / 0x0006
01 25 00 6c 00 00                               |  % l
Received message type 14
Message: SMS Folder status received
Message: Number of Entries: 0
Message: IDs of Entries :
Message sent: 0x14 / 0x0007
00 01 00 6b f8 0f 01                            |    k
[Received Ack of type 14, seq:  4]
[Sending Ack of type 14, seq: 1]
Message received: 0x14 / 0x0006
01 25 00 6c 00 00                               |  % l
Received message type 14
Message: SMS Folder status received
Message: Number of Entries: 0
Message: IDs of Entries :
Message sent: 0x14 / 0x000a
00 01 00 07 08 00 00 01 65 01                   |         e
[Received Ack of type 14, seq:  5]
[Sending Ack of type 14, seq: 2]
Message received: 0x14 / 0x0005
01 25 00 09 02                                  |  %
Received message type 14
SMS reading failed:
        Invalid location!
GetSMS IN 1 failed! (The given memory location is invalid.)
Serial device: closing device


--
http://www.dogsbody.org/