[PMX:#] Nokia 6100 and DKU-5 - nearly there

[Collins, Steve]

I have a setup as described in the subject.  I am now trying to get it all to 
communicate happily.  I've been back and forth through the list for ideas, and 
feel I'm pretty close.  I have the right drivers loaded AFAIK.

When I try gnokii --identify, I get the following:

address@hidden user]# gnokii --identify
GNOKII Version 0.6.2
LOG: debug mask is 0x1
Lockfile /var/lock/LCK..ttyUSB0 is stale. Overriding it..
phone instance config:
model: 6100
port_device: /dev/ttyUSB0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
...

The messages simply continue forever, repeating the last two lines ad 
infinitum.  Can anyone shed some light on the situation, as I'd really like to 
get this going.

TIA.

Steve
--
Stephen Collins
Web Development Section
eBusiness Division
__________________________________________________
Department of Industry, Tourism and Resources 
Level 12, 20 Allara Street, Canberra City ACT 2600
GPO Box 9839, Canberra ACT 2601

E address@hidden
P +61 2 62137193
C +61 410 680722
F +61 2 62136227


**********************************************************************
The information contained in this e-mail, and any attachments to it, is
intended for the use of the addressee and is confidential. If you are not the 
intended recipient you must not use, disclose, read, forward, copy or retain 
any of the information. If you have received this e-mail in
error, please delete it and notify the sender by return e-mail or telephone.
The Commonwealth does not warrant that any attachments are free from viruses or 
any other defects. You assume all liability for any loss, damage or other 
consequences which may arise from opening or using the attachments.
***********************************************************************************