Re: Nokia 6020 support

[Dario Abatianni]

Am Sonntag, 15. Mai 2005 00:17 schrieb Pawel Kot:

> > Just a quick note to say that gnokii works fine with the Nokia 6020 with
> > a quick patch (attached for 0.6.5)
>
> Thanks, commited.

I tried gnokii-cvs today (0.6.6) with my 6020 and still can't get it to 
communicate correctly. SMSes are read fine but the AT command for Phone book 
entries doesn't seem to work. (model = AT). With "model = 6020" I get nothing 
but a bunch of numbers and debug messages (attached below). I use a USB CA-42 
cable to connect to the phone, which gets recognized by the kernel 
as /dev/ttyACM0.

Are there any hints I can follow?
Thanks!

------------snip-------------

Connecting
Serial device: opening device /dev/ttyACM0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Serial write: transmitter busy, waiting
Serial write: transmitter ready
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop

-- 
Dario Abatianni