Re: help required to connect gnokii with nokia6100 by DKU-5 cable on slackware 10.1

[Robert Smith]

Have you tried lowering the rate? It looks like you have it set for  
19200 somewhere but it's trying to init at 115200.

Do you believe this to be a USB issue or gnokii configuration issue?

have you tried setting this in your gnokiirc?
serial_write_usleep = 10000


On Jun 24, 2005, at 10:04 PM, BOBBY wrote:

> Hi,
> I installed playsms-0.7.1 and gnokii-current on my
> machine.
> Now, when i used the following instruction i saw the
> following error i.e.
> address@hidden:~# gnokii --identify
> GNOKII Version 20050623
> LOG: debug mask is 0x1
> LOG: xdebug mask is 0x1
> Lockfile /var/lock/LCK..ttyUSB0 is stale. Overriding
> it..
> phone instance config:
> model: 6100
> port_device: /dev/ttyUSB0
> connection_type: 0
> init_length: 0
> serial_baudrate: 19200
> serial_write_usleep: -1
> hardware_handshake: 0
> require_dcd: 0
> smsc_timeout: 100
> connect_script:
> disconnect_script:
> rfcomm_cn: 1
> sm_retry: off
> Connecting
> Serial device: opening device /dev/ttyUSB0
> Serial device: setting speed to 115200
> Serial device: setting RTS to low and DTR to low
> Getting model...
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> SM_Block: exiting the retry loop
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> SM_Block: exiting the retry loop
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> SM_Block: exiting the retry loop
> ^[[BSerial device: opening device /dev/ttyUSB0
> Serial device: setting speed to 115200
> Serial device: setting RTS to low and DTR to high
> Getting model...
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
>
> The above line "Serial write: transmitter ready" will
> continue and at the end i received
> IMEI         : (unknown)
> Manufacturer : Nokia
> Model        : (unknown)
> Revision     : (unknown)
> Serial device: closing device
>
> Now, anyone can tell me what i do? What i change into
> my .gnokiirc file so that this problem will be solve.
> I will give u some more details... about my fone and
> cable.
> Mobile fone used for gnokii = Nokia 6100
> Cable used for connection = DKU-5
> Linux version = Slackware 10.1 with kernel = 2.4.xx
> Also, i saw in the kde-control center some more
> settings i.e.
>
> USB-Serial Controller
> Manufacturer: Prolific Technology Inc.
>
>
> Class        0 ((Defined at Interface level))
> Subclass     0
> Protocol     0
> USB Version  1.10
> Vendor ID 0x67b (Prolific Technology, Inc.)
> Product ID   0x2303 (PL2303 Serial Port)
> Revision     3.00
> Speed        12 Mbit/s
> Channels      0
> Max. Packet Size    0
>
>
>
> Regards,
> Bobby.
>
>
>
>
>
> ___________________________________________________________
> Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide  
> with voicemail http://uk.messenger.yahoo.com
>
>
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gnokii-users