[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Nokia 6630 and USB-Cable
From: |
Peter Schütt |
Subject: |
Re: Nokia 6630 and USB-Cable |
Date: |
Mon, 04 Jul 2005 15:53:01 +0200 |
User-agent: |
KNode/0.8.2 |
Hallo,
> On 7/4/05, Peter Schütt <address@hidden> wrote:
>> address@hidden:~/gnokii-0.6.7/patches/kernel_2.6$ make
>> make[1]: Entering directory `/usr/src/kernel-headers-2.6.8-2-k7'
>> CC [M] /home/peter/gnokii-0.6.7/patches/kernel_2.6/nokia_dku2.o
>> /home/peter/gnokii-0.6.7/patches/kernel_2.6/nokia_dku2.c:36:24:
>> usb-serial.h: Datei oder Verzeichnis nicht gefunden
>
> It means that no kernel sources were found.
My Kernel-source are at:
/usr/src/kernel-source-2.6.8
and
/usr/src/linux
I think this is correct.
>> /home/peter/gnokii-0.6.7/patches/kernel_2.6/nokia_dku2.c:67: error:
>> `usb_serial_probe' undeclared here (not in a function)
>
> For that use driver version from CVS.
Does it work with my kernel?
>
>> >> Perhaps I can get a DKU5 - cable.
>> >> Does this work?
>> >
>> > Not all models. AFAIR original Nokia one doesn't work. Most clones
>> > work.
>>
>> I found an old DKU5-cable, not from nokia, but it does not work.
>
> How exactly it doesn't work?
GNOKII Version 0.6.7
LOG: debug mask is 0x1
phone instance config:
model: AT-HW
port_device: /dev/ttyUSB0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Initializing AT capable mobile phone ...
Serial device: opening device /dev/ttyUSB0
Serial device: setting RTS to high and DTR to high
Serial device: setting RTS to high and DTR to low
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d | ATZ
write: [ATZ<cr>]
Message sent: 0x00 / 0x0005
41 54 45 31 0d | ATE1
write: [ATE1<cr>]
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d | AT+CMEE=1
write: [AT+CMEE=1<cr>]
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d | AT+CGMM
write: [AT+CGMM<cr>]
Initialization failed (11)
Telephone interface init failed: Command timed out.
Quitting.
There is no difference if I use gnapplet or not.
BTW What is the correct driver for using with gnapplet?
What do I have to write in gnokiirc ?
Thanks for help.
Ciao
Peter Schütt
--
www.pstt.de
Die E-Mail-Adresse funktioniert, kann aber u.U. in Zukunft mal abgeschaltet
werden. Ohne "_remove_this_" wird sie auch in Zukunft noch funktionieren.