Re: MacOSX success

[Noki Deen]

thanks for the info

I'm currently use MacOS 10.3 panther

I will try it with PL2303X compatible (DKU-5 clone) cable

I wonder if it is also work ??

after install fink ... what package you has apt-get  it?
do you install MacOSX developer suite ?




On Jul 16, 2005, at 2:03 AM, michael eng wrote:

> Hi everyone,
>
> Writing to report success with the following configuration:
>
> - Mac OS X 10.4.1
> - Fink 0.8.0
> - Nokia CA-41 cable
> - Nokia 6100 phone, v5.51
> - Works in both AT and FBUS mode
>
> The build worked fine except make failed because it couldn't find 
> Fink's
> libintl in /sw -- this had to be tweaked manually.
>
> The CA-41 is recognised immediately by the kernel, however, it is not
> recognised by front end applications as anything other than a
> straightforward USB modem.
>
> The tty device assigned varies depending on which port the cable is
> plugged into.  I think this varies from previous versions.
>
> Trace follows, for those interested...
>
> Best regards,
> Michael
>
> --
> michael eng
>
> albino~$ uname -a
> Darwin albino-w4.london.daydream.org.uk 8.1.0 Darwin Kernel Version 
> 8.1.0: Tue May 10 18:16:08 PDT 2005; 
> root:xnu-792.1.5.obj~4/RELEASE_PPC Power Macintosh powerpc
> albino~$ dmesg | tail -1
> AppleUSBCDCACMData: Version number - 3.1.3, Input buffers 8, Output 
> buffers 4
> albino~$ gnokii --identify
> GNOKII Version 0.6.7
> LOG: debug mask is 0x1
> phone instance config:
> model: AT
> port_device: /dev/cu.usbmodem1911
> connection_type: 0
> init_length: 0
> serial_baudrate: 19200
> serial_write_usleep: -1
> hardware_handshake: 0
> require_dcd: 0
> smsc_timeout: 100
> connect_script:
> disconnect_script:
> rfcomm_cn: 1
> sm_retry: off
> Initializing AT capable mobile phone ...
> Serial device: opening device /dev/cu.usbmodem1911
> Serial device: setting RTS to high and DTR to high
> Message sent: 0x00 / 0x0004
> 41 54 5a 0d                                     | ATZ
> write: [ATZ<cr>]
> Message sent: 0x00 / 0x0005
> 41 54 45 31 0d                                  | ATE1
> write: [ATE1<cr>]
> read : [ATE1<cr><cr><lf>OK<cr><lf>]
> Message received: 0x00 / 0x000b
> 02 41 54 45 31 0d 0d 0a 4f 4b 0d                |  ATE1   OK
> Received message type 00
> Message sent: 0x00 / 0x000a
> 41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1
> write: [AT+CMEE=1<cr>]
> read : [AT+CMEE=1<cr><cr><lf>OK<cr><lf>]
> Message received: 0x00 / 0x0010
> 02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d |  AT+CMEE=1   OK
> Received message type 00
> Message sent: 0x06 / 0x0008
> 41 54 2b 43 47 4d 4d 0d                         | AT+CGMM
> write: [AT+CGMM<cr>]
> read : [AT+CGMM<cr><cr><lf>Nokia 6100<cr><lf><cr><lf>OK<cr><lf>]
> Message received: 0x06 / 0x001c
> 02 41 54 2b 43 47 4d 4d 0d 0d 0a 4e 6f 6b 69 61 |  AT+CGMM   Nokia
> 20 36 31 30 30 0d 0a 0d 0a 4f 4b 0d             |  6100    OK
> Received message type 06
> Message sent: 0x06 / 0x0008
> 41 54 2b 43 47 4d 49 0d                         | AT+CGMI
> write: [AT+CGMI<cr>]
> read : [AT+CGMI<cr><cr><lf>Nokia<cr><lf><cr><lf>OK<cr><lf>]
> Message received: 0x06 / 0x0017
> 02 41 54 2b 43 47 4d 49 0d 0d 0a 4e 6f 6b 69 61 |  AT+CGMI   Nokia
> 0d 0a 0d 0a 4f 4b 0d                            |     OK
> Received message type 06
> Message sent: 0x5e / 0x0009
> 41 54 2b 43 53 43 53 3f 0d                      | AT+CSCS?
> write: [AT+CSCS?<cr>]
> read : [AT+CSCS?<cr><cr><lf>+CSCS: "PCCP437"<cr><lf><cr><lf>OK<cr><lf>]
> Message received: 0x5e / 0x0023
> 02 41 54 2b 43 53 43 53 3f 0d 0d 0a 2b 43 53 43 |  AT+CSCS?   +CSC
> 53 3a 20 22 50 43 43 50 34 33 37 22 0d 0a 0d 0a | S: "PCCP437"
> 4f 4b 0d                                        | OK
> Received message type 5e
> Initialisation completed
> Message sent: 0x06 / 0x0008
> 41 54 2b 43 47 4d 4d 0d                         | AT+CGMM
> write: [AT+CGMM<cr>]
> read : [AT+CGMM<cr><cr><lf>Nokia 6100<cr><lf><cr><lf>OK<cr><lf>]
> Message received: 0x06 / 0x001c
> 02 41 54 2b 43 47 4d 4d 0d 0d 0a 4e 6f 6b 69 61 |  AT+CGMM   Nokia
> 20 36 31 30 30 0d 0a 0d 0a 4f 4b 0d             |  6100    OK
> Received message type 06
> Message sent: 0x06 / 0x0008
> 41 54 2b 43 47 4d 49 0d                         | AT+CGMI
> write: [AT+CGMI<cr>]
> read : [AT+CGMI<cr><cr><lf>Nokia<cr><lf><cr><lf>OK<cr><lf>]
> Message received: 0x06 / 0x0017
> 02 41 54 2b 43 47 4d 49 0d 0d 0a 4e 6f 6b 69 61 |  AT+CGMI   Nokia
> 0d 0a 0d 0a 4f 4b 0d                            |     OK
> Received message type 06
> Message sent: 0x06 / 0x0008
> 41 54 2b 43 47 4d 52 0d                         | AT+CGMR
> write: [AT+CGMR<cr>]
> read : [AT+CGMR<cr><cr><lf>V 05.51     
> <cr><lf>27-02-04<cr><lf>NPL-2<cr><lf>(c) Nokia.             
> <cr><lf><cr><lf>OK<cr><lf>]
> Message received: 0x06 / 0x0048
> 02 41 54 2b 43 47 4d 52 0d 0d 0a 56 20 30 35 2e |  AT+CGMR   V 05.
> 35 31 20 20 20 20 20 0d 0a 32 37 2d 30 32 2d 30 | 51       27-02-0
> 34 0d 0a 4e 50 4c 2d 32 0d 0a 28 63 29 20 4e 6f | 4  NPL-2  (c) No
> 6b 69 61 2e 20 20 20 20 20 20 20 20 20 20 20 20 | kia.
> 20 0d 0a 0d 0a 4f 4b 0d                         |      OK
> Received message type 06
> Message sent: 0x06 / 0x0008
> 41 54 2b 43 47 53 4e 0d                         | AT+CGSN
> write: [AT+CGSN<cr>]
> read : [AT+CGSN<cr><cr><lf>354311123456789<cr><lf><cr><lf>OK<cr><lf>]
> Message received: 0x06 / 0x0021
> 02 41 54 2b 43 47 53 4e 0d 0d 0a 33 35 34 33 31 |  AT+CGSN   35431
> 31 30 30 30 32 31 30 31 34 39 0d 0a 0d 0a 4f 4b | 1123456789    OK
> 0d                                              |
> Received message type 06
> IMEI         : 354311123456789
> Manufacturer : Nokia
> Model        : Nokia 6100
> Revision     : V 05.51
> Serial device: closing device
> albino~$ gnokii --identify
> GNOKII Version 0.6.7
> LOG: debug mask is 0x1
> phone instance config:
> model: 6100
> port_device: /dev/cu.usbmodem1911
> connection_type: 0
> init_length: 0
> serial_baudrate: 19200
> serial_write_usleep: -1
> hardware_handshake: 0
> require_dcd: 0
> smsc_timeout: 100
> connect_script:
> disconnect_script:
> rfcomm_cn: 1
> sm_retry: off
> Connecting
> Serial device: opening device /dev/cu.usbmodem1911
> Serial device: setting speed to 115200
> Serial device: setting RTS to low and DTR to low
> Getting model...
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> SM_Block: exiting the retry loop
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> SM_Block: exiting the retry loop
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> SM_Block: exiting the retry loop
> Serial device: opening device /dev/cu.usbmodem1911
> Serial device: setting speed to 115200
> Serial device: setting RTS to low and DTR to high
> Getting model...
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> SM_Block: exiting the retry loop
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> SM_Block: exiting the retry loop
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> SM_Block: exiting the retry loop
> Serial device: opening device /dev/cu.usbmodem1911
> Serial device: setting RTS to low and DTR to low
> Serial device: setting RTS to high and DTR to high
> Serial device: setting speed to 19200
> Serial device: setting speed to 115200
> Getting model...
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> [Received Ack of type 1b, seq:  0]
> [Sending Ack of type 1b, seq: 1]
> Message received: 0x1b / 0x0032
> 01 31 00 08 00 01 58 2c 00 26 56 20 30 35 2e 35 |  1    X, &V 05.5
> 31 20 20 20 20 20 0a 32 37 2d 30 32 2d 30 34 0a | 1      27-02-04
> 4e 50 4c 2d 32 0a 28 63 29 20 4e 6f 6b 0a 43 00 | NPL-2 (c) Nok C
> 00 00                                           |
> Received message type 1b
> model length: 5
> Received model NPL-2
> Identifying...
> Message sent: 0x1b / 0x0005
> 00 01 00 00 41                                  |     A
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> [Received Ack of type 1b, seq:  1]
> [Received Ack of type 1b, seq:  2]
> [Sending Ack of type 1b, seq: 2]
> Message received: 0x1b / 0x001a
> 01 31 00 01 00 01 41 14 00 10 33 35 34 33 31 31 |  1    A   354311
> 30 30 30 32 31 30 31 34 39 00                   | 123456789
> Received message type 1b
> Received imei 354311123456789
> [Sending Ack of type 1b, seq: 3]
> Message received: 0x1b / 0x0032
> 01 31 00 08 00 01 58 2c 00 26 56 20 30 35 2e 35 |  1    X, &V 05.5
> 31 20 20 20 20 20 0a 32 37 2d 30 32 2d 30 34 0a | 1      27-02-04
> 4e 50 4c 2d 32 0a 28 63 29 20 4e 6f 6b 0a 43 00 | NPL-2 (c) Nok C
> 00 00                                           |
> Received message type 1b
> Received revision V 05.51
> model length: 5
> Received model NPL-2
> IMEI         : 354311123456789
> Manufacturer : Nokia
> Model        : NPL-2
> Revision     : V 05.51
> Serial device: closing device
> albino~$ exit
>
> Process shell finished
>
>
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gnokii-users