Diverting with 6110

[Michal Medvecky]

Hi,

it became my nightmare. I have one phone number and need to redirect it
operatively to various numbers.

My operator is unable to offer this service, so I bought a new sim card
and inserted it into older 6110 phone.

I was trying various methods of diverting, but every method fails:

slovakia:/home/misko# /usr/lib/gnokii/gnokii --divert -o register -t all
-c voice -n 608210632
GNOKII Version 0.6.5
LOG: debug mask is 0x1
phone instance config:
model: 6110
port_device: /dev/ttyS0
connection_type: 0
init_length: 0
serial_baudrate: 4800
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 200
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Serial device: opening device /dev/ttyS0
Serial port speed 4800 not supported!
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
[Received Ack of type 40, seq:  0]
[Sending Ack of type 40, seq: 0]
Message received: 0x40 / 0x000c
01 01 64 03 01 4c 0d 01 01 01 1b 58             |   d  L     X
Received message type 40
Message: Extended commands enabled.
Message sent: 0x40 / 0x0003
00 01 66                                        |   f
[Received Ack of type 40, seq:  1]
[Sending Ack of type 40, seq: 1]
Message received: 0x40 / 0x0014
01 01 66 01 33 35 30 31 33 38 32 30 37 34 30 39 |   f 350138207409
30 33 32 00                                     | 032
Received message type 40
IMEI: 350138207409032
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
[Received Ack of type 40, seq:  2]
[Sending Ack of type 40, seq: 2]
Message received: 0x40 / 0x000c
01 01 64 03 01 4c 0d 01 01 01 1b 58             |   d  L     X
Received message type 40
Message: Extended commands enabled.
Message sent: 0x40 / 0x0004
00 01 c8 01                                     |   Č
[Received Ack of type 40, seq:  3]
[Sending Ack of type 40, seq: 3]
Message received: 0x40 / 0x0025
01 01 c8 01 00 56 20 30 35 2e 30 32 0a 30 32 2d |   Č  V 05.02 02-
30 34 2d 30 31 0a 4e 50 45 2d 33 0a 28 63 29 20 | 04-01 NPE-3 (c)
4e 4d 50 2e 00                                  | NMP.
Received message type 40
Received SW 05.02
Received model NPE-3
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
[Received Ack of type 40, seq:  4]
[Sending Ack of type 40, seq: 4]
Message received: 0x40 / 0x000c
01 01 64 03 01 4c 0d 01 01 01 1b 58             |   d  L     X
Received message type 40
Message: Extended commands enabled.
Message sent: 0x40 / 0x0004
00 01 c8 05                                     |   Č
[Received Ack of type 40, seq:  5]
[Sending Ack of type 40, seq: 5]
Message received: 0x40 / 0x000a
01 01 c8 05 00 33 34 34 35 00                   |   Č  3445
Received message type 40
Received SW 05.02, HW 3445
<cut>
Found model "NPE-3"
Message sent: 0x06 / 0x0037
00 01 00 01 03 00 15 0b 01 09 81 06 28 01 36 f2 |             ( 6ň
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
00 00 00 00 00 00 00                            |
[Received Ack of type 06, seq:  6]
Message sent: 0x06 / 0x0037
00 01 00 01 03 00 15 0b 01 09 81 06 28 01 36 f2 |             ( 6ň
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
00 00 00 00 00 00 00                            |
SM_Block: exiting the retry loop
Message sent: 0x06 / 0x0037
00 01 00 01 03 00 15 0b 01 09 81 06 28 01 36 f2 |             ( 6ň
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
00 00 00 00 00 00 00                            |
SM_Block: exiting the retry loop
Error: Command timed out.
Serial device: closing device


slovakia:/home/misko# echo '*21*608210632#G' | gnokii --keysequence
GNOKII Version 0.6.5
LOG: debug mask is 0x1
phone instance config:
model: 6110
port_device: /dev/ttyS0
connection_type: 0
init_length: 0
serial_baudrate: 4800
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 200
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Serial device: opening device /dev/ttyS0
Serial port speed 4800 not supported!
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
[Received Ack of type 40, seq: 80]
[Sending Ack of type 40, seq: 6]
Message received: 0x40 / 0x000c
01 01 64 03 01 4c 0d 01 01 01 1b 58             |   d  L     X
Received message type 40
Message: Extended commands enabled.
Message sent: 0x40 / 0x0003
00 01 66                                        |   f
[Received Ack of type 40, seq:  1]
[Sending Ack of type 40, seq: 7]
Message received: 0x40 / 0x0014
01 01 66 01 33 35 30 31 33 38 32 30 37 34 30 39 |   f 350138207409
30 33 32 00                                     | 032
Received message type 40
IMEI: 350138207409032
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
[Received Ack of type 40, seq:  2]
[Sending Ack of type 40, seq: 0]
Message received: 0x40 / 0x000c
01 01 64 03 01 4c 0d 01 01 01 1b 58             |   d  L     X
Received message type 40
Message: Extended commands enabled.
Message sent: 0x40 / 0x0004
00 01 c8 01                                     |   Č
[Received Ack of type 40, seq:  3]
[Sending Ack of type 40, seq: 1]
Message received: 0x40 / 0x0025
01 01 c8 01 00 56 20 30 35 2e 30 32 0a 30 32 2d |   Č  V 05.02 02-
30 34 2d 30 31 0a 4e 50 45 2d 33 0a 28 63 29 20 | 04-01 NPE-3 (c)
4e 4d 50 2e 00                                  | NMP.
Received message type 40
Received SW 05.02
Received model NPE-3
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
[Received Ack of type 40, seq:  4]
[Sending Ack of type 40, seq: 2]
Message received: 0x40 / 0x000c
01 01 64 03 01 4c 0d 01 01 01 1b 58             |   d  L     X
Received message type 40
Message: Extended commands enabled.
Message sent: 0x40 / 0x0004
00 01 c8 05                                     |   Č
[Received Ack of type 40, seq:  5]
[Sending Ack of type 40, seq: 3]
Message received: 0x40 / 0x000a
01 01 c8 05 00 33 34 34 35 00                   |   Č  3445
Received message type 40
Received SW 05.02, HW 3445
<cut>
Found model "NPE-3"
Message sent: 0x0c / 0x0007
00 01 00 42 01 0c 01                            |    B
[Received Ack of type 0c, seq:  6]
Message sent: 0x0c / 0x0007
00 01 00 42 01 0c 01                            |    B
[Received Ack of type 0c, seq:  7]
Message sent: 0x0c / 0x0007
00 01 00 42 01 0c 01                            |    B
[Received Ack of type 0c, seq:  0]
Failed to press key: Command timed out.
Message sent: 0x0c / 0x0007
00 01 00 42 01 02 01                            |    B
[Received Ack of type 0c, seq:  1]
Message sent: 0x0c / 0x0007
00 01 00 42 01 02 01                            |    B
[Received Ack of type 0c, seq:  2]
Message sent: 0x0c / 0x0007
00 01 00 42 01 02 01                            |    B
[Received Ack of type 0c, seq:  3]
Failed to press key: Command timed out.
Message sent: 0x0c / 0x0007
00 01 00 42 01 01 01                            |    B
[Received Ack of type 0c, seq:  4]
Message sent: 0x0c / 0x0007
00 01 00 42 01 01 01                            |    B
[Received Ack of type 0c, seq:  5]
Message sent: 0x0c / 0x0007
00 01 00 42 01 01 01                            |    B
[Received Ack of type 0c, seq:  6]
Failed to press key: Command timed out.
Message sent: 0x0c / 0x0007
00 01 00 42 01 0c 01                            |    B
[Received Ack of type 0c, seq:  7]
Message sent: 0x0c / 0x0007
00 01 00 42 01 0c 01                            |    B
[Received Ack of type 0c, seq:  0]
Message sent: 0x0c / 0x0007
00 01 00 42 01 0c 01                            |    B
[Received Ack of type 0c, seq:  1]
Failed to press key: Command timed out.
Message sent: 0x0c / 0x0007
00 01 00 42 01 06 01                            |    B
[Received Ack of type 0c, seq:  2]
Message sent: 0x0c / 0x0007
00 01 00 42 01 06 01                            |    B
[Received Ack of type 0c, seq:  3]
Message sent: 0x0c / 0x0007
00 01 00 42 01 06 01                            |    B
[Received Ack of type 0c, seq:  4]
Failed to press key: Command timed out.
Message sent: 0x0c / 0x0007
00 01 00 42 01 0a 01                            |    B
[Received Ack of type 0c, seq:  5]
Message sent: 0x0c / 0x0007
00 01 00 42 01 0a 01                            |    B
[Received Ack of type 0c, seq:  6]
Message sent: 0x0c / 0x0007
00 01 00 42 01 0a 01                            |    B
[Received Ack of type 0c, seq:  7]
Failed to press key: Command timed out.
Message sent: 0x0c / 0x0007
00 01 00 42 01 08 01                            |    B
[Received Ack of type 0c, seq:  0]
Message sent: 0x0c / 0x0007
00 01 00 42 01 08 01                            |    B
[Received Ack of type 0c, seq:  1]
Message sent: 0x0c / 0x0007
00 01 00 42 01 08 01                            |    B
[Received Ack of type 0c, seq:  2]
Failed to press key: Command timed out.
Message sent: 0x0c / 0x0007
00 01 00 42 01 02 01                            |    B
[Received Ack of type 0c, seq:  3]
Message sent: 0x0c / 0x0007
00 01 00 42 01 02 01                            |    B
[Received Ack of type 0c, seq:  4]
Message sent: 0x0c / 0x0007
00 01 00 42 01 02 01                            |    B
[Received Ack of type 0c, seq:  5]
Failed to press key: Command timed out.
Message sent: 0x0c / 0x0007
00 01 00 42 01 01 01                            |    B
[Received Ack of type 0c, seq:  6]
Message sent: 0x0c / 0x0007
00 01 00 42 01 01 01                            |    B
[Received Ack of type 0c, seq:  7]
Message sent: 0x0c / 0x0007
00 01 00 42 01 01 01                            |    B
[Received Ack of type 0c, seq:  0]
Failed to press key: Command timed out.
Message sent: 0x0c / 0x0007
00 01 00 42 01 0a 01                            |    B
[Received Ack of type 0c, seq:  1]
Message sent: 0x0c / 0x0007
00 01 00 42 01 0a 01                            |    B
[Received Ack of type 0c, seq:  2]
Message sent: 0x0c / 0x0007
00 01 00 42 01 0a 01                            |    B
[Received Ack of type 0c, seq:  3]
Failed to press key: Command timed out.
Message sent: 0x0c / 0x0007
00 01 00 42 01 06 01                            |    B
[Received Ack of type 0c, seq:  4]
Message sent: 0x0c / 0x0007
00 01 00 42 01 06 01                            |    B
[Received Ack of type 0c, seq:  5]
Message sent: 0x0c / 0x0007
00 01 00 42 01 06 01                            |    B
[Received Ack of type 0c, seq:  6]
Failed to press key: Command timed out.
Message sent: 0x0c / 0x0007
00 01 00 42 01 03 01                            |    B
[Received Ack of type 0c, seq:  7]
Message sent: 0x0c / 0x0007
00 01 00 42 01 03 01                            |    B
[Received Ack of type 0c, seq:  0]
Message sent: 0x0c / 0x0007
00 01 00 42 01 03 01                            |    B
[Received Ack of type 0c, seq:  1]
Failed to press key: Command timed out.
Message sent: 0x0c / 0x0007
00 01 00 42 01 02 01                            |    B
[Received Ack of type 0c, seq:  2]
^A1Message sent: 0x0c / 0x0007
00 01 00 42 01 02 01                            |    B
[Received Ack of type 0c, seq:  3]
Message sent: 0x0c / 0x0007
00 01 00 42 01 02 01                            |    B
[Received Ack of type 0c, seq:  4]
Failed to press key: Command timed out.
Message sent: 0x0c / 0x0007
00 01 00 42 01 0b 01                            |    B
[Received Ack of type 0c, seq:  5]
Message sent: 0x0c / 0x0007
00 01 00 42 01 0b 01                            |    B
[Received Ack of type 0c, seq:  6]
Message sent: 0x0c / 0x0007
00 01 00 42 01 0b 01                            |    B
[Received Ack of type 0c, seq:  7]
Failed to press key: Command timed out.
Message sent: 0x0c / 0x0007
00 01 00 42 01 0e 01                            |    B
[Received Ack of type 0c, seq:  0]
Message sent: 0x0c / 0x0007
00 01 00 42 01 0e 01                            |    B
[Received Ack of type 0c, seq:  1]
Message sent: 0x0c / 0x0007
00 01 00 42 01 0e 01                            |    B
[Received Ack of type 0c, seq:  2]
Failed to press key: Command timed out.
Serial device: closing device


Anyway, normal commands work:
slovakia:/home/misko# gnokii --identify
GNOKII Version 0.6.5
LOG: debug mask is 0x1
phone instance config:
model: 6110
port_device: /dev/ttyS0
connection_type: 0
init_length: 0
serial_baudrate: 4800
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 200
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Serial device: opening device /dev/ttyS0
Serial port speed 4800 not supported!
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
[Received Ack of type 40, seq: 80]
[Sending Ack of type 40, seq: 4]
Message received: 0x40 / 0x000c
01 01 64 03 01 4c 0d 01 01 01 1b 58             |   d  L     X
Received message type 40
Message: Extended commands enabled.
Message sent: 0x40 / 0x0003
00 01 66                                        |   f
[Received Ack of type 40, seq:  1]
[Sending Ack of type 40, seq: 5]
Message received: 0x40 / 0x0014
01 01 66 01 33 35 30 31 33 38 32 30 37 34 30 39 |   f 350138207409
30 33 32 00                                     | 032
Received message type 40
IMEI: 350138207409032
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
[Received Ack of type 40, seq:  2]
[Sending Ack of type 40, seq: 6]
Message received: 0x40 / 0x000c
01 01 64 03 01 4c 0d 01 01 01 1b 58             |   d  L     X
Received message type 40
Message: Extended commands enabled.
Message sent: 0x40 / 0x0004
00 01 c8 01                                     |   Č
[Received Ack of type 40, seq:  3]
[Sending Ack of type 40, seq: 7]
Message received: 0x40 / 0x0025
01 01 c8 01 00 56 20 30 35 2e 30 32 0a 30 32 2d |   Č  V 05.02 02-
30 34 2d 30 31 0a 4e 50 45 2d 33 0a 28 63 29 20 | 04-01 NPE-3 (c)
4e 4d 50 2e 00                                  | NMP.
Received message type 40
Received SW 05.02
Received model NPE-3
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
[Received Ack of type 40, seq:  4]
[Sending Ack of type 40, seq: 0]
Message received: 0x40 / 0x000c
01 01 64 03 01 4c 0d 01 01 01 1b 58             |   d  L     X
Received message type 40
Message: Extended commands enabled.
Message sent: 0x40 / 0x0004
00 01 c8 05                                     |   Č
[Received Ack of type 40, seq:  5]
[Sending Ack of type 40, seq: 1]
Message received: 0x40 / 0x000a
01 01 c8 05 00 33 34 34 35 00                   |   Č  3445
Received message type 40
Received SW 05.02, HW 3445
<cut>
Found model "NPE-3"
IMEI         : 350138207409032
Manufacturer : Nokia
Model        : NPE-3
Revision     : SW 05.02, HW 3445
Serial device: closing device

My gnokiirc:
[global]
port = /dev/ttyS0
model = 6110
initlength = default
connection = serial
use_locking = yes
serial_baudrate = 4800
smsc_timeout = 20
[gnokiid]
bindir = /usr/sbin/
[connect_script]
TELEPHONE = 12345678
[disconnect_script]
[logging]
debug = on
rlpdebug = off
xdebug = off

Any help? I've searched the archives but either noone has the same
problem or i'm completely blind :-)

Thanks

Michal