Re: Nokia 6100&DKU-5 USB cable,is it may work in Linux?

[BOBBY]

hi koss,
according to my experience, nokia 6100 and DKU-5 cable
with pl2303 driver for linux is not working with
gnokii. i also tried to use it but use less. similarly
i bought the serial cable for it but again useless.
The only serial cable which works with it is dau9p i
think which is no longer available at nokia site. So,
according to my experience, don't waist time on it. I
tried nokia 6670 + dku-2 cable which is easily
configurable on linux. Even fedora core 3 with 2.6.x
kernel automatically detects nokia 6670 at boot time.
So, if u can purchase that one then its fine and
gnokii will be configured in less than 5 min.

Bobby (Naveed)
--- Koss <address@hidden> wrote:

> Hi, I have Nokia 6100,DKU-5 original USB cable, 
> gnokii latest vertion 0.6.8 under Suse 9.2 kernel
> 2.6.8-24. 
> But, I have trouble to get it work,I read FAQ on
> gnokii.org and a lot of  
> aticles in google - useless it's not work,there is
> my steps: 
>  
> 1.Attaching pl2303 - to /dev/ttyUSB0: 
> modprobe usbserial vendor=0x421 product=0x800 
> modprobe pl2303 
> ->dmesg: 
> Aug 26 21:09:09 xstation kernel:
> drivers/usb/serial/usb-serial.c: USB Serial 
> support registered for Generic 
> Aug 26 21:09:09 xstation kernel: usbserial_generic
> 1-1.3:1.0: Generic converter 
> detected 
> Aug 26 21:09:09 xstation kernel: usb 1-1.3: Generic
> converter now attached to 
> ttyUSB0 
> Aug 26 21:09:09 xstation kernel: usbcore: registered
> new driver 
> usbserial_generic 
> Aug 26 21:09:09 xstation kernel: usbcore: registered
> new driver usbserial 
> Aug 26 21:09:09 xstation kernel:
> drivers/usb/serial/usb-serial.c: USB Serial 
> Driver core v2.0 
> Aug 26 21:09:09 xstation kernel:
> drivers/usb/serial/usb-serial.c: USB Serial 
> support registered for PL-2303 
> Aug 26 21:09:09 xstation kernel: usbcore: registered
> new driver pl2303 
> Aug 26 21:09:09 xstation kernel:
> drivers/usb/serial/pl2303.c: Prolific PL2303 
> USB to serial adaptor driver v0.11 
>  
> 2.Permitions to /dev/ttyUSB0 
> chmod 666 /dev/ttyUSB0 
>  
> 3.Conf file .gnokiirc 
> port = /dev/ttyUSB0 
> model = 6100 
> connection = serial(or dlr3p) 
> use_locking = no  
> serial_baudrate = 115200 
> serial_write_usleep = -1 
> debug = on  
>  
> 4.Run ./gnokii --identify 
> address@hidden:~> gnokii --identify 
> GNOKII Version 0.6.8 
> LOG: debug mask is 0x1 
> phone instance config: 
> model: 6100 
> port_device: /dev/ttyUSB0 
> connection_type: 0 
> init_length: 0 
> serial_baudrate: 19200 
> serial_write_usleep: -1 
> hardware_handshake: 0 
> require_dcd: 0 
> smsc_timeout: 100 
> connect_script: 
> disconnect_script: 
> rfcomm_cn: 1 
> sm_retry: off 
> Connecting 
> Serial device: opening device /dev/ttyUSB0 
> Serial device: setting speed to 115200 
> Serial device: setting RTS to low and DTR to low 
> Serial write: transmitter busy, waiting 
> and nothing. 
>  
> What can I do?I did something wrong?Or possibly it's
> not work in Linux? 
> Thanks a lot. 
>  
>  
>  
>  
>  
>   
>   
>   
> 
> 
> 
> _______________________________________________
> gnokii-users mailing list
> address@hidden
>
http://lists.nongnu.org/mailman/listinfo/gnokii-users
> 



                
___________________________________________________________ 
To help you stay safe and secure online, we've developed the all new Yahoo! 
Security Centre. http://uk.security.yahoo.com